* Remove global limit on white light temperature
Here are the supported temperatures of some popular bulbs:
Philips Hue: 2000K-6500K (the current 500-154 mired range)
LIFX Color 1000: 2500K-9000K
IKEA TRÅDFRI: 2200K, 2700K, 4000K
Obviously, Home Assistant cannot enforce a global limit and work properly
with all of these bulbs. So just remove the limit and leave it up to each
platform to work it out.
This commit updates the existing users and adds a clamp to Hue (where the
limit appears to have originated). It does not attempt to update other
platforms that might need extra handling of the larger range that is now
possible.
* Add min_mireds/max_mireds state attributes to lights
* Support min_mireds/max_mireds with LIFX lights
This increases the global limit to 6535 seconds (1h48m55s) because that is
supported by all light platforms.
Some platforms support even longer transition times so the limit should
actually be platform specific.
* Restore states
* feedback
* Remove component move into recorder
* space
* helper
* Address my own comments
* Improve test coverage
* Add test for light restore state
* Add support for light effects
* Move PLATFORM_SCHEMA changes in light to mqtt_template
* Add effect validation
* Add unittests
* Add light effect to demo and unittests
* Use cv.string for config validation
* Use cv.ensure_list for config validation
* Fix typo
* Remove unused exception management for effect
* Make flux always adjust brightness of light (even when not in XY mode)
* Remove kelvin mode from flux switch
The light/turn_on service only works with mired values, kelvin values
are out of range per the schema.
* Use already defined min/max values for light/turn_on schema
* Clamp temp value to light/turn_on allowed values
* Update __init__.py
addedattribute "WHITE_VALUE" to improve support for RGBW devices
* Update services.yaml
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
shortened line
* Update __init__.py
* Update __init__.py
* Add mysensors RGBW and light tests
* Activate support for mysensors RGBW devices with support for
white_value attribute.
* Add white_value support in light demo platform.
* Add tests for white_value and more for light component.
* Add tests for light demo platform.
* Fix import order in check_config.
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Revert "Clamp brightness between 0 and 255"
This reverts commit c87238e8b5.
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Add support for providing color_name which accepts a CSS3 valid, human readable string such as red or blue
* Forgot the schema validation!
* ugh farcy
* use html5_parse_legacy_color for more input options
* Add webcolors==1.5 to setup.py
* Block pylint no-member errors on tuple
* add color_name_to_rgb test
* whoops
* revert changes to individual platforms
* If color_name is set, pop it off params and set rgb_color with it
* Forgot to reset wink.py
* Import the legacy function as color_name_to_rgb directly
* reset test_color.py
* Improve light services.yaml
The rewrite addresses a problem with the tellstick hardware dropping
commands when too many simultaneous calls is being made from HA. Also fixes a bug when the dim level was changed externally.
This breaks previous configurations.
The new config for tellstick is
```yaml
tellstick:
signal_repetitions: X
```
Lights and Switches are detected automatically.
Sensors work like before because they do not share any functionality with the other devices and they also needs a complete other configuration.
* Make light controllable independently with types V_LIGHT, V_DIMMER,
V_RGB and V_RGBW. V_RGBW is not implemented in the frontend yet.
* Add discovery for light platform.
* Add optimistic mode config setting for switch and light
to allow feedback state from actuator.
* Move S_LIGHT, V_LIGHT, V_STATUS types from switch to light platform.
* Change node update logging to debug from info level.
* Fix some inaccurate comments.
Anders Melchiorsen
Paulus Schoutsen
Nate
Pascal Vizeli
Johann Kellerman
Adam Mills
lichtteil
Antoine Bertin
Fabian Affolter
Jeff Wilson
Marc Pabst
Robbie Trencheny
Assaf Inbal
Keaton Taylor
Jan Harkes
pavoni
Stefan Jonasson
Fabian Affolter
MartinHjelmare
Harald Nagel
Dean
Ryan Kraus
richard
Arthur Andersen
happyleaves
Tom Duijf