* Added support for a new platform: climate.modbus
* Made changes based on code review.
* Made changes based on code review
* Made changes that were recommended in the pull request review.
* Fixed spacing line 144
* Added docstrings for the added helper functions.
* Fixed set_temperature() function to use a variable local to the function for the target temp.
* Fixed lint formatting error
* Modified logic when checking the target temperature, as well as fixing the setup_platform function
* add ability to set fan on
* add tests and change "not on" status to "auto"
* hound fix
* more hounds
* I don't understand new lines
* fix linting errors
* more linting fixes
* change method signature
* lint fixes
* hopefully last lint fix
* correct temp ranges according to ecobee API docs
* update dependency to latest version
* update tests with values from new temp logic
* fix linting issue
* more linting fixes
* add SUPPORT_FAN_MODE to capabilities
* add fan_list to attributes.
restore current fan state to OFF if fan is not running.
change target high/low temps from null to target temp when not in auto mode.
change target temp from null to high/low temp when in auto mode
change mode attribute to climate_mode for consistency with other lists.
* remove unused import
* simplify logic
* lint fixes
* revert change for target temps
* Fixes for mclimate accounts with not only melissa components
* Fixes melissa sensor to only use HVAC
* Bumping version to 1.0.3 and remove OP_MODE that is not supported
* Removes STATE_AUTO from translation and tests
* Issue 10388: Fixed platform schema min/max values of CONF_SETPOINT_SHIFT_MIN and CONF_SETPOINT_SHIFT_MAX
* readded default values for CONF_SETPOINT_SHIFT_MAX and CONF_SETPOINT_SHIFT_MIN
* Upgrade pylint to 1.8.1
* Fix no-else-return
* Fix bad-whitespace
* Fix too-many-nested-blocks
* Fix raising-format-tuple
See https://github.com/PyCQA/pylint/blob/master/doc/whatsnew/1.8.rst
* Fix len-as-condition
* Fix logging-not-lazy
Not sure about that TEMP_CELSIUS though, but internally it's probably just like if you concatenated any other (variable) string
* Fix stop-iteration-return
* Fix useless-super-delegation
* Fix trailing-comma-tuple
Both of these seem to simply be bugs:
* Nest: The value of self._humidity never seems to be used anywhere
* Dovado: The called API method seems to expect a "normal" number
* Fix redefined-argument-from-local
* Fix consider-using-enumerate
* Fix wrong-import-order
* Fix arguments-differ
* Fix missed no-else-return
* Fix no-member and related
* Fix signatures-differ
* Revert "Upgrade pylint to 1.8.1"
This reverts commit af78aa00f125a7d34add97b9d50c14db48412211.
* Fix arguments-differ
* except for device_tracker
* Cleanup
* Fix test using positional argument
* Fix line too long
I forgot to run flake8 - shame on me... 🙃
* Fix bad-option-value for 1.6.5
* Fix arguments-differ for device_tracker
* Upgrade pylint to 1.8.2
* 👕 Fix missed no-member
* fix generic_thermostat bug when restore state from HA start up
if you don't set "initial_operation_mode" in config, you will get
`self._enabled = True` when init GenericThermostat. And then you will
miss the `if self._current_operation != STATE_OFF` statement and the
self._enabled still keep `True`. That's the problem
* add a test to describe the restore case
* Fix tado overlay end state
Previously, when tado ended an overlay state itself, say because a timer
expired or a scheduled temperature change ocurred, the tado climate
component would not return to Smart Schedule mode. This change fixes
that issue
* Correct tado state after multiple rapid updates
Previosuly, making two changes to tado climate within 10 seconds, for
example setting operation mode to Tado mode, then changing the
temperature, would leave the entity showing the incorrect state for up
to a minute.
This change forces an unthrottled update after setting the climate
state, which fixes the issue
* Fix comment formatting
* Fixing demo platform to use support_flags
* Fixed tests as well
* Moved humidity low / high as always available based on defaults
* Updated demo platform to show more combinations
* Entity#unique_id defaults to None
* Initial commit entity registry
* Clean up unique_id property
* Lint
* Add tests to entity component
* Lint
* Restore some unique ids
* Spelling
* Remove use of IP address for unique ID
* Add tests
* Add tests
* Fix tests
* Add some docs
* Add one more test
* Fix new test…
* New venstar climate component
* Corrected items raised during the PR process.
* Corrected flak8 issues.
* Add support for venstar models without humidity control.
* Changed the idle operation mode to off. Few other adjustments.
* Minor changes (log messages, sorting, etc.)
* Lazy loading of service descriptions
* Fix tests
* Load YAML in executor
* Return a copy of available services to allow mutations
* Remove lint
* Add zha/services.yaml
* Only cache descriptions for known services
* Remove lint
* Remove description loading during service registration
* Remove description parameter from async_register
* Test async_get_all_descriptions
* Remove lint
* Fix typos from multi-edit
* Remove unused arguments
* Remove unused import os
* Remove unused import os, part 2
* Remove unneeded coroutine decorator
* Only use executor for loading files
* Cleanups suggested in review
* Increase test coverage
* Fix races in existing tests
* Issue #11432: Do not stop initializing KNX when tunelling device cant be reached
* Issue #11432: Mark devices as unavailable if gateway cant be connected
* Add toucline platform
* Fix bugs suggested by houndci-bot
* Fix bugs suggested by houndci-bot
* Fix style based on comments and lint
* Remove target temperature
* Fix unexpected EOF
* Fix unexpected EOF
* Fix wrongfully named numberOfDevices variable
* Add target temperature
* Update requirements_all.txt
* Change after review
* Add supported features
* Remove update in constructor
* Set member variables to none in constructor
* Minor changes
* Updated generic thermostat to respect operation_mode and added away mode
* Updated tests to include away mode and corrected init problem for sensor state
Added more tests to improve coverage and corrected again lint errors
Fixed new test by moving to correct package
Fixed bug not restoring away mode on restart
* Added support for idle on interface through state
* Added back initial_operation_mode and modified away_temp to be only one for now
* Fixed houndci-bot errors
* Added back check for None on restore temperature
* Fixed failing tests as well
* Removed unused definitions from tests
* Added use case for no initial temperature and no previously saved temperature
* Added Daikin climate component
* Fixed tox & hound
* Place up the REQUIREMENTS var
* Update .coveragerc
* Removed unused customization
* Prevent setting invalid operation state
* Fixed hound
* Small refactor according to code review
* Fixed latest code review comments
* Used host instead of ip_address
* No real change
* No real change
* Fixed lint errors
* More pylint fixes
* Shush Hound
* Applied suggested changes for temperature & humidity settings
* Fixed hound
* Fixed upper case texts
* Fixed hound
* Fixed hound
* Fixed hound
* Removed humidity since even the device has the feature it cant be set from API
* Code review requested changes
* Fixed hound
* Fixed hound
* Trigger update after adding device
* Added Daikin sensors
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed hound
* Fixed hound
* Fixed travis
* Fixed coverage decrease issue
* Do less API calls and fixed Travis failures
* Distributed code from platform to climate and sensor componenets
* Rename sensor state to device_attribute
* Fixed hound
* Updated requirements
* Simplified code
* Implemented requested changes
* Forgot one change
* Don't allow customizing temperature unit and take it from hass (FOR NOW)
* Additional code review changes applied
* Condensed import even more
* Simplify condition check
* Reordered imports
* Disabled autodiscovery FOR NOW :(
* Give more suggestive names to sensors
* fix: hmip-etrv-2 now working with homeassistant (see also pull request at pyhomematic)
* fix linting issue and typo
* address comment @pvizeli
* Only use cached data in current operation mode
* fix linting issue
* Support for EcoNet water heaters.
* Fixed requested changes.
* Added logging when temp or operation mode are None
* More fixes from PR review.
* Updated pyeconet version to fix natural gas water heater error. Last PR review fix.
* Generic thermostat restore operation mode
* Test restore operation mode
* Fix trailing whitespace
* Fix line too long
* Fix test duplicate entity_id
* Fix test
* async_added_to_hass modify modify internal state
* Test inital_operation_mode
* More restore state tests
* Fix whitespace
* fix test_custom_setup_param
* Test "None" target temp
* Implement supported_features for the climate component
* Test supported features
* Convert generic thermostat to supported features
* Max / min temperature are not features
* Fix lint
* Min / max humidity are not features
* Linting
* Remove current temperature / humidity
* Move c-hacker-style constants to boring integers. Booo!
* Refactor all the climate platforms to use the new supported_features
* Force all climate platforms to implement supported_features
* Fix mistakes
* Adapt hive platform
* Move flags into a constant
* Calm the hound
* Added fan support. Reduced number of calls to the thermostat to a minimum
* Move temp rounding to config schema
* Fixed pep8 errors
* Fix for review comments.
* removed unneeded if block
* Added missing precision attr back
* Fixed pylint errors
* Code review fixes. Fan support by model number.
* Defined circulate state
* Fix unit conversion for Sensibo A/C units
When the Sensibo component was released, there was a provision to not convert the temperature units unless "nativeTemperatureUnit" was returned with the API. I'm not sure if the API changed on Sensibo's side, but I do not get this key passed back with API requests.
This causes my current temperature to be returned in CELSIUS instead of FAHRENHEIT.
Removing this fixes it, and I can confirm the units are shown properly now.
* Update adding comment showing temperature is always in C
* add eph ember controls
* updates based on review
* remove unused import
* update to new version of pyephember
* added myself to codeowners as requested
* make codeowners alphabetical
* run fixed gen_requirements_all
* Update ephember.py
* Added Toon support again
* Forgot about .coveragerc
* Fixed style issues
* More styling and importing fixes
* Implemented the suggestions made by @pvizeli
* The smallest fix possible
* Removed custom names for Toon states
* Fix last push with 2 outdated lines
* Removed HOME and NOT_HOME, moved to just climate states
* Bumped dependency for better handling of smartplugs that don't report power consumption
* Implemented changes as suggested by @balloob
* Rebase, gen_requirements_all.py finally working
* New climate platform with MQTT
* Use STATE_OFF
* Basic tests for climate.mqtt
* lint
* actualy collect coverage
* First tests and fixes
* Add possibility to receive temperature via MQTT
* Require only either sensor or mqtt topic
* Add mqtt publishing for away mode, hold mode and aux heat.
* Use configurabe on/off payloads
* Add pessimistic mode
* Initialize aux and away with False instead of None
* Remove Sensor
* Use correct scheduling method
* Move all methods to coroutines
* Fixed away_mode for Ecobee thermostat. Now away mode is properly turned on using indefinite away hold.
* fixed lint warnings
* fixed lint warnings
* - now it is possible to use float values for ecobee temperature holds
- fixed a bug that caused an exception when temperature hold was set in away mode
- added unit tests for ecobee thermostat
* fixed lint errors
* fixed lint errors
* renamed add_devices to async_add_devices according to hass naming scheme
* replaced some occurencies of async_add_entites to async_add_devices
* fixed unit test
* fixed unit test
* First draft of XKNX module for Home-Assistant
* XKNX does now take path of xknx.yaml as parameter
* small fix, telegram_received_callback has different signature
* changed method of registering callbacks of devices
* removed non async command lines from xknx
* telegram_received_cb not needed within HASS module
* updated requirements
* Configuration if XKNX should connect via Routing or Tunneling
* bumping version to 0.6.1
* small fix within xknx plugin
* bumped version
* XKNX-Switches are now BinarySensors and Logic from Sensor was moved to BinarySensor
* renamed Outlet to Switch
* pylint
* configuration of KNX lights via HASS config, yay!
* changed name of attribute
* Added configuration for xknx to switch component
* added support for sensors within hass configuration
* added support for climate within hass configuration
* Thermostat -> Climate
* added configuration support for binary_sensors
* renamed Shutter to Cover
* added configuration support for cover
* restructured file structure according to HASS requirements
* pylint
* pylint
* pylint
* pylint
* pylint
* pylint
* updated version
* pylint
* pylint
* pylint
* added setpoint support for climate devices
* devices are now in a different module
* more asyncio :-)
* pydocstyle
* pydocstyle
* added actions to binary_sensor
* allow more than one automation
* readded requirement
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* Modifications suggested by hound
* xknx now imported as local import
* hound *sigh*
* lint
* 'fixed' coverage.
* next try for getting gen_requirements_all.py working
* removed blank line
* XKNX 0.7.1 with logging functionality, replaced some print() calls with _LOGGER
* updated requirements_all.txt
* Fixes issue https://github.com/XKNX/xknx/issues/51
* https://github.com/XKNX/xknx/issues/52 added raw access to KNX bus from HASS component.
* bumped version - 0.7.3 contains some bugfixes
* bumped version - 0.7.3 contains some bugfixes
* setting setpoint within climate device has to be async
* bumped version to 0.7.4
* bumped version
* https://github.com/XKNX/xknx/issues/48 Adding HVAC support.
* pylint suggestions
* Made target temperature and set point required attributes
* renamed value_type to type within sensor configuration
* Issue https://github.com/XKNX/xknx/issues/52 : added filter functionality for not flooding the event bus.
* suggestions by pylint
* Added notify support for knx platform.
* logging error if discovery_info is None.
* review suggestions by @armills
* line too long
* Using discovery_info to notifiy component which devices should be added.
* moved XKNX automation to main level.
* renamed xknx component to knx.
* reverted change within .coveragerc
* changed dependency
* updated docstrings.
* updated version of xknx within requirements_all.txt
* moved requirement to correct position
* renamed configuration attribute
* added @callback-decorator and async_prefix.
* added @callback decorator and async_ prefix to register_callbacks functions
* fixed typo
* pylint suggestions
* added angle position and invert_position and invert_angle to cover.knx
* typo
* bumped version within requirements_all.txt
* bumped version
* Added support for HVAC controller status
This fixes an issue (#8554) whereby the Honeywell thermostats stopped
working after a period of hours or days. We do this by forgetting the
authorisation token that was sent back to us when we first logged in,
which causes the underlying evohomeclient library to perform the full
login procedure again.
* Refactor mysensors callback and add validation
* Add mysensors entity class. The mysensors entity class inherits from
a more general mysensors device class.
* Extract mysensors name function.
* Add setup_mysensors_platform for mysensors platforms.
* Add mysensors const schemas.
* Update mysensors callback and add child validation.
* Remove gateway wrapper class.
* Add better logging for mysensors callback.
* Add discover_persistent_devices function.
* Remove discovery in mysensors component setup.
* Clean up gateway storage in hass.data.
* Update all mysensors platforms.
* Add repr for MySensorsNotificationDevice.
* Fix bug in mysensors climate target temperatures.
* Clean up platforms. Child validation simplifies assumptions in
platforms.
* Remove not needed try except statements. All messages are validated
already in pymysensors.
* Clean up logging.
* Add timer debug logging if callback is slow.
* Upgrade pymysensors to 0.11.0.
* Make dispatch callback async
* Pass tuple device_args and optional add_devices
* Also return new_devices as list instead of dictionary.
* Honeywell fixes and improvements
Give the Honeywell device a state ('On', 'Off', etc) that
can be displayed to user and understood by other components.
Previously this was always 'Unknown'. Update also raises a
state_changed event when a new temperature is polled.
These two together fix an issue (#8688) where Honeywell
climate data couldn't be logged in InfluxDB.
* Roll back some changes
These were not necessary to achieve the result I wanted.
* Renamed RoundThermostat's 'device' member for greater clarity
Now called 'client'
* Improve and simplify discovering thermostat mode
Per code review, this is a rather neater way to discover the thermostat mode
* Update tests for compatibility with new component
The tests previously relied upon the update() method being
called in the constructor. This is no longer the case.
* Address formatting review comment
Parens not necessary
* This system mode is not certain to apply to domestic hot water
Moved the mode lookup to only happen on update of radiator devices,
since hot water devices seem to be treated differently and I can't test.
* Return a 0 temperature value when none is found
It's well documented that these TRVs will only return the current temperature
for a short time after the actuator has moved. This means that, usually, they will
not return the current temperature. Setting a non-value here causes errors in the logs
and for the TRV to not show on the dashboard at all
* Fix lint issue
* Fix -1 value issue
Fixed issue where thermostat will sometimes return a current temperature or set temperature value of -1
* Update radiotherm.py
* Update radiotherm.py
* Update radiotherm.py
Added retry limit
* Update radiotherm.py
* Update radiotherm.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* Fixed a bug where changing fan speed was not possible
* Bump pymodbus version to 1.3.1 to fix issue #8285
* Changed all modbus components so that they use CONF_SLAVE from const.py
In trying to come up for some reason behind issue #6365 (which only
happens on some platforms) the best guess is that some components are
managing to get a string value all the way up to the Polymer UI for
temperature, which then an increment of +0.5 is treating as a string
concat operation instead of addition. So 20 + 0.5 becomes 200.5 hits
the max thermostat value.
This will throw an exception if the climate temp value isn't a
number. That's going to turn a soft fail into a hard fail on
potentially a number of platforms. Mysensors is one of the platforms
that was reported as having the issue. So put some explicit float
casts where that might be coming from as well.
Model CT50 has an "Auto" mode. When mode is set to auto we need to ask
what the current state is: cool or heat. Then we can query the
appropriate target temperature.
Without this fix, the target temperature shows up blank in the UI and
setting the mode fails.
* added default parameter
* zone overlay can be set with or without a temperature and with or without a duration. Duration is not supported by hass
* Fixes issue #7059 with missing sensorDataPoints
* Fixes issue #6943 added ac_mode
* ac_mode cases
* added fan modes
* changed handling of device state OFF
* fixed an error initializing a dictionary (#6943)
* changed pytado version
* activated pytado debugging
* Changed pyTado version
* mytado.com changed authentication challenge
* Fixed linelength and whitespace issues
* requirements to pytado changed
* Add Sensibo climate platform
* Force update after running a service
* Add sensibo to .coveragerc
* Use 10s timeout
* Fix schema. Remove print.
* Better handle unit conversions.
* Fixes utf-8 encoding no longer required by libopenzwave0.3.3
Removes byte encoding for values operation mode, fan mode and swing
mode.
* Fix zwave climate tests for utf-8 change
* Add link to docs and remove comments which are obvious
* Update docstrings
* Repleace conf details with link to docs
* Add link to docs
* Update docstrings
* Update import
* Update ordering
* Update ordering
* Update docstring
* Update ordering
* Update ordering
* Added tado climate component
named the component v1 because of the unsupported state of the api I
used (mytado.com)
* sensor component
* climate component which uses sensors
* main component initiating sensor and climate devices
* order of imports
* consts for username and password
* removed redundant code
* changed wrong calls and properties
* remove pylint overrides
* merged update() and push_update()
* changed wrong calls
* removed pylint overrides
* moved try..except
* renamed MyTado hass-data object
* added TadoDataStore
* moved update methods from sensor to TadoDataStore
* reorganised climate component
* use new TadoDataStore
* small change to overlay handling
* code refactoring
* removed unnessesary comments
* changed throttle to attribute
* changed suggestions from PR
* Added constant variable for string literal
* remove wrong fget() call
* changed dependencies
* Changed operation mode list
* added human readable list of operations
* removed unnecessary const
* activated update on add_devices
* droped unit
* removed unnused property
* changed temperature conversion
* removed defaults from config
changed naming of tado data const
* switched operation_list key/values
* changed the value returned as state
* added one extra line
* dropped state to use base impl.
* renamed component
* had to inplement temperature_unit
* because it is not implemented in base class
* create a copy of the sensors list
* because it can be changed by other components
* had to check for empty data object
* hass is too fast now
* Refactor zwave discovery to entity schema
* Address PR concerns
* Split DISCOVERY_SCHEMAS into separate file
* Only check cover reverse workaround once
* Integrate suggestion in #5590 by nordlead2005. This change has been
sitting in limbo for over a month, but it is a good idea. I don't
mean to step on nordlead2005's toes, but we need to make progress.
* Use defined constant for TEMPERATURE_HOLD
* Integrate handling of vacation into hold mode. Canceling vacation
hold requires an update to the external pyecobee library. Creation
of vacation is not supported (it would be straightforward in the code,
but a complex user interface would be required, similar to what is
now done in the ecobee thermostat).
* Add capability to retrieve list of defined climates from ecobee.
* The mode() method used to return the system mode in internal
representation. However, the user sees a different notation in
the ecobee thermostat. Seeing some internal name is particularly
weired with user-defined climates, where these are named "smart1",
"smart2", etc., instead of the name the user has defined. Return
the user-defined name instead. This change might break some user
interfaces but is easily remedied (e.g., use "Away" instead of
"away").
* Simplify is_away_mode_on().
* Correction of erroneously indented else statement.
* Change comment as flake8 gets confused.
* Make zwave devices listen on less network changes.
* Convert more platforms
* Remove printouts.
* Fix copy-paste
* Change default dependent list to empty list
* Create zwave devices on OZW thread and only add them during discovery.
* Read and write devices dict from loop thread.
* More async
* replace callback with coroutine
* import common function instead of callin git
* First round of not using values directly
* Round two
* lint
* Round four
* Conflict
* Round five
* Update zwave.py
* round six
* Docstring
* flakywakie
* Fetch values in constructor
* Blank line removal
* Set attributes in callback
* Docstring
* Round seven
* Ughgit add homeassistant/components/lock/zwave.py!
* Sloppy code
* Add support for the Open Energy Monitor Thermostat
* Fix linting errors
* Define an update method and local state
* fix linter
* Small tweaks.
Update oemthermostat version, default name and docstrings
* Fail to setup oem platform if connection fails.
* update requirements
* More tweaks to auth and exceptions
* Remove target temp
* Support away_mode as permanent hold and hold_mode as temporary hold.
* Add comments to explain code better. Remove indefinite hold preference
to be consistent with 'away_mode'.
* Remove redundant input validation which is already accomplished through
defined schemata.
* Rely on defined state attributes for hold mode.
* Remove misleading comment. This comment seems to assume that sleep
mode is a hold; it is a schedule instead. The code snippets in the
comment could never work.
* Remove use of constants for hold mode. Will be made irrelevant
by a planned change by nordlead2005.
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
After _control_heating() is executed, current_operation() is correctly called but _is_device_active() still reports the old state if the heater switch, at least in my case. The resulting climate state is incorrect until the next refresh, which apparently occurs only when _sensor_changed() gets called (it can be minutes after).
I think the state of the heater switch should be forced to update at the end of _control_heating(), but I don't know how to do that...
A simple sleep() fixes it, but obviously is just a temporary workaround, I'm not really expecting this PR to be actually committed, unless there's no other solution.
* Made target temperature sensitive to auto mode
* Used current_operation instead of operation_mode
* When not in auto_mode, the temperature is sent to set_temperature
* Low and high targets are switched in the call to set_temperature.
* Missed on current_operation. Use STATE_AUTO.
* Remove incorrectly checked in directory.
* Updated set_temperature based on Martin's feedback.
* Use ATTR_TEMPERATURE from const.py
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
* eq3btsmart: support modes and clean up the code to use climatedevice's features
* eq3btsmart: re-add device state attributes
adds reporting for is_locked, valve, window_open and low_battery,
exposing everything the device reports currently.
* eq3btsmart: bump version req
* eq3btsmart: fix a typo in mode name, report unknown when not initialized
* eq3btsmart: depend on newly forked python-eq3bt lib, pythonify states
* ecobee_set_fan_min_on_time: fix issue using 'entity_id' field and add service field help text
* climate.ecobee: add 'resume_program' service
* Add default value for resume_all and correct entity_id field name reference
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Ecobee autoAway Event
* Update ecobee.py
Checking if event['running'] true is pointless because if false event['type'] will equal template and when true type will only be 'hold' or 'autoAway' so I've removed this check from the statement
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* Homematic update with HomematicIP/HomematicWired support and multible connections
* fix bug in virtualkey service
* create new service & cleanups
* fix lint
* Pump pyhomematic 0.1.18
* start nestcam support
* start nestcam support
* introduce a access_token_cache_file
* Bare minimum to get nest thermostat loading
* occaisonally the image works
* switch to nest-aware interval for testing
* Add Nest Aware awareness
* remove duplicate error logging line
* Fix nest protect support
* address baloobot
* fix copy pasta
* fix more baloobot
* last baloobot thing for now?
* Use streaming status to determine online or not. online from nest means its on the network
* Fix temperature scale for climate
* Add support for eco mode
* Fix auto mode for nest climate
* update update current_operation and set_operation mode to use constant when possible. try to get setting something working
* remove stale comment
* unused-argument already disabled globally
* Add eco to the end, instead of after off
* Simplify conditional when the hass mode is the same as the nest one
* away_temperature became eco_temperature, and works with eco mode
* Update min/max temp based on locked temperature
* Forgot to set locked stuff during construction
* Cache image instead of throttling (which returns none), respect NestAware subscription
* Fix _time_between_snapshots before the first update
* WIP pin authorization
* Add some more logging
* Working configurator, woo. Fix some hound errors
* Updated pin workflow
* Deprecate more sensors
* Don't update during access of name
* Don't update during access of name
* Add camera brand
* Fix up some syntastic errors
* Fix ups ome hound errors
* Maybe fix some more?
* Move snapshot simulator url checking down into python-nest
* Rename _ready_to_update_camera_image to _ready_for_snapshot
* More fixes
* Set the next time a snapshot can be taken when one is taken to simplify logic
* Add a FIXME about update not getting called
* Call update during constructor, so values get set at least once
* Fix up names
* Remove todo about eco, since that's pretty nest
* thanks hound
* Fix temperature being off for farenheight.
* Fix some lint errors, which includes using a git version of python-nest with updated code
* generate requirements_all.py
* fix pylint
* Update nestcam before adding
* Fix polling of NestCamera
* Lint
This lets components declare their precision for temperatures. If
nothing is declared, we assume 0.1 C and whole integer precision in
F. Currently this supports only WHOLE, HALVES, and TENTHS for
precision, but adding other precision levels is pretty straight
forward.
This also uses proliphix as an example of changing the precision for a
platform.
Closes bug #4350
* Climate: more consistent units
* Prevent unnecessary conversion in entity component
* int -> round
* Disable Google tests because they connect to the internet
* Remove default conversion rounding F->C
* Add rounding of temp to weather comp
* Fix equality
* Maintain precision when converting temp in entity
* Revert "Disable Google tests because they connect to the internet"
This reverts commit b60485dc19.
* Migrate callbacks to use schedule_update_ha_state
* Migrate MQTT sensor callback to async
* Migrate wemo to not update inside schedule_update_ha_state
* Make MQTT switch async
* Fix nx584 test
* Migrate tellstick callback
* Migrate vera callback
* Alarm control panel - manual: use async callbacks
* Run the switch rest tests that work
GATEWAYS was a dict, so would overwrite item if key was the same. This
would happen when using multiple MQTT gateways, since the device id is
the same (`mqtt`).
* Fix by changing GATEWAYS from dict into list.
* Use hass data to store mysensors gateways instead of having GATEWAYS
be a global.
Sebastian Muszynski
Heiko Thiery
Paulus Schoutsen
Khole
Lincoln Kirchoff
dangyuluo
Ville Skyttä
Martin Hjelmare
uchagani
Andrey
John Allen
maxclaey
Julius Mittenzwei
kennedyshead
Teemu R
karlkar
Otto Winter
William Scanlon
tbergo
Thibault Cohen
ruohan.chen
Nigel Rook
hawk259
Marius
Frantz
Otto Winter
Dan Cinnamon
Fabian Affolter
Thom Troy
Lukas Barth
Josh Anderson
Anders Melchiorsen
abondoe
Daniel Claes
Dan Nixon
William Scanlon
Derek Brooks
Alan Fischer
ziotibia81
dasos
Cameron Bulock
Dan Ferrante
Rendili
Ted Drain
Bryan York
Milan V
Pascal Vizeli
biggms
boltgolt
Sergey Isachenko
Egor Tsinko
Michael Prokop
Dan Sarginson
Phil Cole
Phil Lavin
Andrew
Matthew Treinish
Sabesto
Sean Dague
Ryan Nowakowski
Wolfgang Malgadey
Tim Wilde
Alok Saboo
Keaton Taylor
aufano
Daniel Perna
geekofweek
John Arild Berentsen
Greg Dowling
Adam Mills
Lev Aronsky
Duoxilian
Wolf-Bastian Pöttner
Stuart Mumford
Jeff Wilson
Gianluca Barbaro
jtscott
Brian Torres-Gil
Josh Nichols
devdelay
r-jordan
Albert Lee
Lewis Juggins
andyat