* Add WebSocket API for intiting a WebRTC stream
See https://github.com/home-assistant/architecture/discussions/640
* Increase test coverage for webrtc camera stream
* Apply suggestions from code review
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Fix transition handling for tplink light
* Apply suggestions from code review
* Test that all transitions are passed correctly
* Fix linting
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Listen for config updates from DlnaDmrEntity.async_added_to_hass
Use `Entity.async_on_remove` for dealing with callback cancellation,
instead of re-inventing the wheel with `_remove_ssdp_callbacks`.
* Use async_write_ha_state within async methods
* Import YAML config from async_setup_platform
* Import flow prompts user when device is uncontactable during migration
When config flow is able to contact a device, or when it has information
from SSDP, it will create config entries without error. If the device is
uncontactable at this point then it will appear as unavailable in HA
until it is turned on again.
When import flow cannot migrate an entry because it needs to contact the
device and can't, it will notify the user with a config flow form.
* Don't del unused parameters, HA pylint doesn't care
* Remove unused imports from tests
* Abort config flow at earliest opportunity
* Return async_abort instead of raising AbortFlow
* Consolidate config entry test cleanup into a single function
* fixup! Consolidate config entry test cleanup into a single function
Revert "Consolidate config entry test cleanup into a single function"
This reverts commit 8220da7263.
* Check resource acquisition/release in specific tests
* fixup! Check resource acquisition/release in specific tests
* Remove unused network dependency from manifest
* _on_event runs in async context
* Call async_write_ha_state directly (not via shedule_update)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Refactor Xiaomi vacuum with sensors.
This is the first step into refactoring xiaomi vacuum attributes into sensors.
What is missing are some switches and binary sensors etc.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Use generic sensor for Xiaomi vacuum sensors.
By using HA coordinator, the generic Xiaomi sensor class can be used with these
coordinators to get the status sensors from vacuum. This also means now that
sensors are available as soon as HA starts, which is a nice plus.
Now the only reason to create a subclass of the generic sensors is when custom
value parsing needs to be done.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Working vacuum sensors via 1 coordinator.
Vacuum needs a custom coordinator to ensure that it fetches all the needed data
and puts it in a dict. From this dict the sensors will then get their data
accordingly.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Remove vacuum setup method in sensor
Sensor is generic enough that vacuum does not require its own setup method.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Don't auto register generic sensors.
Let the user decide which sensor is useful for them and enable them.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Remove converted attributes from xiaomi vacuum.
The attributes that have been converted so far should be removed from the vacuum
attributes list.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Fetch data from vacuum sequentially.
It seems some vacuums do not like parallel requests. The requests that came
before are ignored.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Refactor vacuum sensors to its own container.
By moving vacuum sensors to its own container, there is no more key collisions.
This in turns means that there is need for the split hack to ensure key names
are correct.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* fixup! fix bad rebase.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Fix sensor naming and default registration.
Use proper names for sensors, no need to include from which device status it
came.
Registration of the sensor by default has been parameterised. If the param is
not set, the sensor is not registered.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Make vacuum platform also use coordinator for its data.
By using the coordinator for data in vacuum platfrom, removes the cases where
request gets ignored during the case where the requests are done concurrently by
separate platforms.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Add binary sensor for vacuum
Add binary sensor for waterbox, mop, and water shortage.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Added proper icons to sensors.
https://github.com/home-assistant/core/issues/51361
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Refactor sensors to use dataclass.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Make vacuum use coordinator for its data.
This commit also insures that the binary sensors are only registered for devices
that include a mop.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Minor refactoring
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Update data from coordinator after running command.
This is is to have a faster status change when executing a command like changing
fan speeds. If a manual refresh is not triggered. Worst case scenario it will
take 10s for the new fan speed to be reported in HA.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Refresh within coroutine is ok.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Move logging to _handle_coordinator_update
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Use internal state attribute.
Signed-off-by: Kevin Hellemun <17928966+OGKevin@users.noreply.github.com>
* Fix vacuum typing
* Fix tests constants
* Fix vacuum inconsistent return values
* Fix vacuum state update
* Fix vacuum tests
* Remove impossible cases
* Parametrize custom services test
* Move goto test
* Move clean segment test
* Move clean single segment test
* Test service pause
* Include vacuum in coverage
* Delint
* Fix vacuum sensor dict collision.
This also prevents collision for unique id. As the key is used to construct
unique ids.
* Use f strings as dict keys
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
- These devices sometimes do not respond on the first try
or may be subject to transient broadcast failures, or
overloads. We now try discovery periodically once the
integration has been loaded.
- We used to try this 4x at startup, but that solution
seemed to aggressive as we want to be sure we pickup
the devices after startup as well since the network
will likely be more calm after startup.
* Convert persistent notification tests to async
* Create/dismiss persistent notifications in exposed functions, not service calls
* Fix notify persistent_notification
* Remove setting up persistent_notification
* Drop more setups
* Empty methods
* Undeprecate sync methods because too big task
* Fix setup clearing notifications
* Fix a bunch of tests
* Fix more tests
* Uno mas
* Test persistent notification events
* Clean up stale comment
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
Yuval Aboulafia
Allen Porter
J. Nick Koston
Teemu R
GitHub Action
starkillerOG
Erik Montnemery
Raman Gupta
Bram Kragten
Michael Chisholm
Aaron Bach
Franck Nijhof
Kevin Hellemun
Daniel Hjelseth Høyer
Maciej Bieniek
Jeff Irion
Martin Hjelmare
Marc Mueller
Paulus Schoutsen
Robert Svensson
Jean-Yves Avenard
Tomasz
Thomas Schamm
Fredrik Erlandsson
Lawrence
Simone Chemelli
Tom Brien