* Change CONF_DEFAULT_COLOR CV type
Changed vol.Optional(CONF_DEFAULT_COLOR, default=DEFAULT_COLOR) from cv.string to cv.ensure_list
This allows the optional parameter default_color to be picked up correctly and to function
the option needs to be specifed as follows:
default_color: [0,255,0]
Solution provided by @scossa2020 in issue #5338https://github.com/home-assistant/home-assistant/issues/5338
* Update hyperion.py
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* initial yeelight based on python-yeelight
* adapt yeelight's discovery code & suppress exceptions on set_default
* Support flash & code cleanups
Adds simple pulse for flashing, needs to be refined.
This commit also includes changing transition from seconds to milliseconds,
and cleans up the code quite a bit.
* cleanup code, adjust default transition to 350
* bump required version to 0.0.13
* Cleaning up and marking todos, ready to be reviewed
* Renamed back to yeelight.
* Removed effect support for now until we have some sane effects available.
* Add "breath" notification for flash, currently hidden behind a False check due to unknown issue not accepting it.
* TODO/open points are marked as such.
* Fix a typo in rgb calculation
* yeelight_<bulbtype>_<mac> for autodetected bulbs
hostname from mdns seems to vary
* Lint fixes, add music mode, fix flash
* Flash transforms now to red and back
* Fix lint warnings
* Add initial music mode.
* remove unused mode logging, move set_mode to turn_on
* Add save_on_change configuration variable
* yeelight: check if music mode is on before enabling it.
* Fix linting, bump required python-yeelight version
* More linting fixes, use import when needed instead of saving the module handle
* Use OR instead of + for features assignment
* Fix color temperature support, convert non-rgb values to rgb values in rgb()
* Fix typo on duration, thanks @qzapwy for noticing
* yeelight: fix issues from review, behave when not available
* Implement available()
* Fix transition to take seconds instead of milliseconds
* Fix default configuration for detected bulbs
* Cache values fetched in update()
* Add return values for methods
* yeelight: kwarg-given transition overrides config, slight cleanups
* change settings back to optional, request update when calling add_devices
* As future version of python-yeelight will wrap exceptions, we can handle broken connections more nicely.
* bump yeelight library version
* Remove unused import
* set the default only when settings are changed and not, e.g., when turned on by automation
* update comment & fix linting
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* Fixed crash when lights objects was inited
* Fixed initial value for tellstick lights
* Fixed problem with lights not working with the turn_on action.
* Allow automatic removal of all Hue entities from emulated_hue
* Allow disabling of Hue groups
* Only add device state attributes if they need to be there
* Updated ISY component to not overwrite state_attributes.
The ISY component included an ISYDevice base class that is used by all
of the isy994 platforms. This still overwrote the state_attributes
property instead of the more appropriate device_state_attributes
property. This was also repeated in the isy994 light platform. Both of
these were addressed. This also fixes issue #5428.
* Removed custom state attributes from ISY lights.
The brightness attribute need not be manually reported by the isy994
light platform.
* Removed ISY Node cleanup.
The ISY entities don’t really need to unsubscribe themselves while hass
is shutting down. Because these updates are not sent in a thread, there
is no negative impact from shutting down without unsubscribing. This
greatly speeds up hass shutdown.
* Removed unused attribute from isy994 light platform.
* Cleaned up ISY994 light entity class.
1) Removed the state property. This property is set in the Entity base
class and shouldn’t be overridden here.
2) Set the brightness property. This is the proper way of setting the
brightness for the Light base class.
3) Removed properties that are now unused because of these changes.
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Improved x10 state monitoring
* Improved x10 state monitoring
* Use update mthod to fetch state change
* Use update mthod to fetch state change
* Use update function to fetch status
* remove temp file
* Add doc string to update method
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
* Add support for Zengge Bluetooth bulbs
Adds support for the Zengge Bluetooth RGBW bulbs. These are sold under a
number of brands, including Flux. The bulbs do not support full RGBW
control - they turn off the RGB LEDs when white is enabled, and vice versa.
* Update zengge.py
* platform set-up begin components
* lights seem to be getting set up properly, not sure why they aren't being added...
* typo
* Dependencies line
* toggle working
* toggle working
* added the switch to insteon_local
First commit hope to test tonight or in the morning
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* move dependency declaration before import?
* Move dependencies in Switch
* Update insteon_local.py
* wait for response
* switched the while to an if
switched the while 'cmd2' not in resp: to an if 'cmd2' not in resp: this seems to have the updater working
* Switched the while sleep loop to an if
switched the wile cmd2 not ins resp to be if cmd2 not in resp seems to be working.
* Update insteon_local.py
* import statement
Updated the import statement to import the instance of the insteon_local component not the hub Instance.
* updated import and the device assignment
update the import to import the instance of the insteon_local component not the hub.
* more changes to support the import change
* more changes to support the import change
* change to hass.data and add loop logic
* &&
* Update insteon_local.py
* Update insteon_local.py
* logic fixes and throttle
* reduce polling time
* brightness support
* import util
* hound fixes
* requirements file
* more hound fixes
* newline
* newline weirdness
* lint fixes
* more lint fixes
* switch state
* Update insteon_local.py
* log cmd2 for debugging
* assume success
* remove check for none
* fix comments
* fix comments again
* fix comments, add fixed version of lib, add support for timeout, add support for port, handle invalid login and connection problems
* fix logging exception
* fix hounceci-bot errors
* fix hounceci-bot errors
* requirements fix
* unique-id changes
* make dimmer off use saved ramp rate
* configurator working for lights
* configurator working for switches?
* configurator working for switches?
* include model names and fix lint errors
* lint fix
* fix exception order
* lint fixes
* fix lint errors
* update to use insteon local 0.38
* fix device id
* move status check to library
* move status check to library
* add SKU to setup
* lint fixes
* requirements
* linting
* Add support for Tikteck Bluetooth bulbs
Adds support for the Tikteck RGBW BLE bulbs. These don't provide "true" RGBW
support - at a certain point in RGB space, the white LEDs turn on. Each bulb
has a specific key that needs to be extracted from the Android app.
* Update tikteck.py
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Better async/threading behavior for tellstick.
* Fix lint/style checks.
* Use hass.async_add_job
- Implemented support for covers and dimmable lights.
- Removed global object, use hass.data.
- Disabled polling via update.
- Inherit from common TelldusLiveEntity device.
- Configurable polling interval
- Use https API endpoint
- Use tellduslive package
* Add support for Hue LightGroup entity
* Don't filter on LightGroup and add properties for a group
* Reuse code from HueLight in HueLightGroup
* Remove HueLightGroup and add is_group variable to HueLight
* Make linter happy
* Update light or lightgroup state when a new state is available
* Use schedule_update_ha_state() to schedule the state update. Drop new_lightgroups and use new_lights instead.
* code style fix
* Prevent emulated hue discovery
Test for “HASS Bridge” in discovery info, pass if found, else try and
setup the bridge.
* Solved coding error
Duplicate commands and return false added for component.
* ensure_list
* CONF_ID is not required configuration for enocean lights
* Use vol.All(cv.ensure_list, [vol.Coerce(int)]) as suggested in pull request review
* Fix line too long
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Homematic update with HomematicIP/HomematicWired support and multible connections
* fix bug in virtualkey service
* create new service & cleanups
* fix lint
* Pump pyhomematic 0.1.18
* Default dimmable brightness to 255 from 100
Full brightness for ISY dimmers is 255. The current 100 value turns dimmer switches on to just under half brightness. Probably just an oversight from the Sept implementation.
* Brightness change for turn_on, ramp for turn_off.
Per discussion with Teagan42 and jbcodemonkey, the brightness should rightfully be None and not an explicit value. There is a continuing issue that the ISY modules don't respect HA's brightness customization values. A new issue will be opened for this.
Additionally, turn_off was using ISY's fastoff() which didn't respect the ramping time. The default behavior should just be off().
* Add support for light effects
* Move PLATFORM_SCHEMA changes in light to mqtt_template
* Add effect validation
* Add unittests
* Add light effect to demo and unittests
* Use cv.string for config validation
* Use cv.ensure_list for config validation
* Fix typo
* Remove unused exception management for effect
* used MindrustUK's version ( https://github.com/MindrustUK/python-lightify/commits/master/osramlightify.py ) from Oct 2, 2016 and changed the REQUIRMENTS line to use the fixed lightify component with thread safety fixes
* reformatted long lines
* updated osramlightify requirements in requirements_all.txt
* ran script gen_requirements_all.py
* rerun requirements gen script on linux
* fixed some inspection warnings
* zip file points to a specific commit
* no requests to lights in properties, instead instance variables are update in update method
* regenerated requirements_all.txt
* removed call to update from is_on() property
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* create light.hue_activate_scene service
This creates a light.hue_activate_scene service that takes group_name
and scene_name, and calls phue's bridge.run_scene with those
parameters. This allows calling hue bridge stored scene names by name
during automation.
This only currently works reliably in 1 hue hub configurations (which
is most of them). Phue will be further enhanced to display warnings
when it can't figure out what to do with the parameters passed in to HA.
* Update hue.py
GATEWAYS was a dict, so would overwrite item if key was the same. This
would happen when using multiple MQTT gateways, since the device id is
the same (`mqtt`).
* Fix by changing GATEWAYS from dict into list.
* Use hass data to store mysensors gateways instead of having GATEWAYS
be a global.
* Initial submission of LiteJet integration.
* Add LiteJet switch pressed automation trigger. (State changes are too slow to catch a press-release.)
Add LiteJet scene, replacing commented out code that treated these as lights.
Include LiteJet numbers in the device state so that it is easy to lookup entity -> number.
* Fix missing global.
* Allow light's brightness to be set explicitly.
* Support optional 'ignore' key to ignore prefixes of loads, switches, and scenes that weren't configured for use in the LiteJet system.
* Fix lint errors and warnings.
* Cleanup header comments.
Default to not creating LiteJet switches as these are generally not useful.
* Lint fixes.
* Fixes from pull request feedback.
* Use hass.data instead of globals for data storage.
* Fix lint warnings.
* Add link to docs
* Fix link
* Update line breaks
* Update ordering
* Align vera platofrm to only use add_devices
(instead od add_devices_callback)
* Remove line break
* Use consts
* Update ordering
* Update ordering
* Use const, create default name, use string formatting
* Update ordering
* Use const
* Update import style
* Update ordering and line breaks
* update line breaks
* Set default port
* Set defaults and update ordering
* Update ordering
* Minor style updates
* Update ordering, defaults, line breaks, and readability
* Use constants
* Add line breaks
* use string formatting
* Update line breaks
* Update logger
* Fix initialization of zwave color bulbs
Zwave values can be added to the node in any order. This change allows
proper initialization when the multilevel value is added before the
color value.
* Fix incorrect rename of color command class
commit 220331260e9748ac8e17b3ce776330c1dfb7725b
Merge: 73d93e5c891820
Author: Robbie Trencheny <me@robbiet.us>
Date: Sun Oct 2 17:57:24 2016 -0700
Merge branch 'color_temp_for_mqtt_light' of https://github.com/alterscape/home-assistant into alterscape-color_temp_for_mqtt_light
commit c89182008a
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 23:06:34 2016 -0700
fix missing docstring.
commit e61dda4dd3
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 22:43:04 2016 -0700
fix pep8 errors and typos in tests.
commit 559d1752d2
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 21:41:07 2016 -0700
add tests for mqtt color temp support
commit 702defb932
Author: Ryan Spicer <ryanspicer@gmail.com>
Date: Sun Sep 18 20:55:07 2016 -0700
Add color temp support to mqtt lights.
* Make flux always adjust brightness of light (even when not in XY mode)
* Remove kelvin mode from flux switch
The light/turn_on service only works with mired values, kelvin values
are out of range per the schema.
* Use already defined min/max values for light/turn_on schema
* Clamp temp value to light/turn_on allowed values
* Update Command classes and device types to Sigma SDK
* Fix some pylint
* Seperate constants to file
* Flake8
* coverage and flake8 pylint
* Add services.yaml
* Service descriptions was missing
* Spelling :)
* grammar
* Remove zwave service descriptions from main
* Update __init__.py
addedattribute "WHITE_VALUE" to improve support for RGBW devices
* Update services.yaml
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
* Update __init__.py
shortened line
* Update __init__.py
* Update __init__.py
* Add mysensors RGBW and light tests
* Activate support for mysensors RGBW devices with support for
white_value attribute.
* Add white_value support in light demo platform.
* Add tests for white_value and more for light component.
* Add tests for light demo platform.
* Fix import order in check_config.
* Extend schema
* Update ordering
* Add line breaks
* Align callback name with other platforms
* ALign callbackname with other platforms
* Update callback name to match other platforms
* Update callback name
* Update callback name
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Backend support for importing waypoints from owntracks as HA zones
* Added test for Owntracks waypoints import
* Removed redundant assignment to CONF_WAYPOINT_IMPORT_USER
* Fixed zone test break and code style issues
* Fixed style issues
* Fixed variable scope issues for entities
* Fixed E302
* Do not install pip packages in tests
* EventBus: return function to unlisten
* Convert automation to entities with services
* Refactored zone creation based on code review feedback, enhanced configuration
* Added unit test to enhance waypoint_whitelist coverage
* Fix JSON encoder issue in recorder
* Fix tests docstring
* * Improved zone naming in waypoint import
* Added more test coverage for owntracks and zone
* Back to 0.28.0.dev0
* Code review feedback from @pavoni
* Added bitfield of features for flux_led since we are supporting effects
* Host should be optional for apcupsd component (#3072)
* Use voluptuous for file (#3049)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix linting
* Upgrade pyuserinput to 0.1.11 (#3068)
* Upgrade pyowm to 2.4.0 (#3067)
* improve isfile validation check (#3101)
* Refactor notification titles to allow for them to be None, this also includes a change in Telegram to only include the title if it's present, and to use a Markdown parse mode for messages (#3100)
* Fix broken test
* rfxtrx sensor clean up
* Bitcoin sensor use warning instead of error (#3103)
* Use voluptuous for HDMI CEC & CONF_DEVICES constants (#3107)
* Update voluptuous for nest (#3109)
* Update configuration check
* Extend platform
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Use voluptuous for xmpp (#3127)
* Use voluptuous for twitter (#3126)
* Use voluptuous for Fritzbox and DDWRT (#3122)
* Use Voluptuous for BT Home Hub (#3121)
* Use voluptuous for syslog (#3120)
* Use voluptuous for Aruba (#3119)
* Use constants, update configuration check, and ordering (Pilight) (#3118)
* Use contants, update configuration check, and ordering
* Fix pylint issue
* Migrate to voluptuous (#3113)
* Fix typo (#3108)
* Migrate to voluptuous (#3106)
* Update voluptuous (#3104)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Migrate to voluptuous (#3096)
* Migrate to voluptuous (#3084)
* Fixed Homematic cover (#3116)
* Migrate to voluptuous (#3069)
🐬
* Migrate to voluptuous (#3066)
🐬
* snapcast update (#3012)
* snapcast update
* snapcast update
* validate config
* use conf constants
* orvibo updates (#3006)
🐬
* Update frontend
* move units to temperature for climate zwave. wrong state was sent to mqtt cove
* Use voluptuous for instapush (#3132)
* Use voluptuous for Octoprint (#3111)
* Migrate to voluptuous
* Fix pylint issues
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Updated braviatv's braviarc version to 0.3.4 (#2997)
* Updated braviarc version to 0.3.4
* Updated braviarc version to requirements_all.txt
* Use voluptuous for Acer projector switch (#3077)
🐬
* Use voluptuous for twilio (#3134)
* Use voluptuous for webostv (#3135)
* Use voluptuous for Command line platforms (#2968)
* Migrate to voluptuous
* Fix pylint issues
* Remove FIXME
* Split setup test
* Test with bootstrap
* Remove lon and lat
* Fix pylint issues
* Add coinmarketcap sensor (#3064)
* Migrate to voluptuous (#3142)
🐬
* Back out insteon hub and fan changes (#3062)
* Move details to docs (#3146)
* Update frontend
* Use constants (#3148)
* Update ordering (#3149)
* Migrate to voluptuous (#3092)
* Display the error instead of the traceback (notify.slack) (#3079)
* Display the error instead of the traceback
* Remove name for check
* Automatic ODB device tracker & device tracker attributes (#3035)
* Migrate to voluptuous (#3173)
* Add voluptuous for tomato and SNMP (#3172)
* Improve voluptuous and login errors for Asus device tracker (#3170)
* Add exclude option to nmap device tracker (#2983)
* Add exclude option to nmap device tracker
Adds an optional exclude paramater to nmap device tracker.
Devices specified in the exclude list will never be scanned
by nmap. This can help to reduce log spam.
ex:
```
device_tracker:
- platform: nmap_tracker
hosts: 10.0.0.1/24
home_interval: 1
interval_seconds: 12
consider_home: 120
track_new_devices: yes
exclude:
- 10.0.0.2
- 10.0.0.1
```
* Handle optional exclude
* Style fixed
* Added Xbox Live component (#3013)
* Added Xbox Live component
* Added Xbox Live sensor to coveralls
* Added init success checks
* Added entity id
* Adding link_names to post.message call (#3167)
If you do not turn link_names on, Slack will not highlight @channel and @username messages.
* Allow https (fixes#3150) (#3155)
* Use constants (#3156)
* Bugfix: ctach Runtime errors (#3153)
"RuntimeError: Disable scan failed" has been seen in a live installation
* Migrate to voluptuous (#3166)
🐬
* Migrate to voluptuous (#3164)
🐬
* Migrate to voluptuous (#3163)
🐬
* Migrate to voluptuous (#3162)
🐬 and 🍪 for fixing quotes!
* Exclude www_static from pydocstyle linting (#3175)
🐬
* Migrate to voluptuous (#3174)
* Migrate to voluptuous (#3171)
* Use voluptuous for mFi switch (#3168)
* Migrate to voluptuous
* Take change configuration into account
* Migrate to voluptuous (#3144)
🐬
* Add the occupancy sensor_class (#3176)
Such a complicated PR
* Update frontend
* Use voluptuous for Unifi, Ubus (#3125)
* Using alert with Hue maintains prior state (#3147)
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* MQTT fan platform (#3095)
* Add fan.mqtt, allow brightness to be passed and mapped to a fan speed for compatibility with emulated_hue
* Pylint/Flake8 fixes
* Remove brightness
* Add more features, like custom oscillation/speed payloads and setting the speed list
* Flake8 fixes
* flake8/pylint fixes
* Use constants
* block fan.mqtt from coverage
* Fix oscillating comment
* Add Sphinx API doc generation (#3029)
* add's sphinx project to docs/ dir
* include core/helpers autodocs for API reference
* Allow reloading automation without restarting HA (#3002)
* Migrate to voluptuous (#3182)
🐬
* Migrate to voluptuous (#3179)
🐬
* Added scale and offset to the Temper component (#2853)
🐬
* Use voluptuous for BT and Owntracks device trackers (#3187)
🐬
* Correct binary_sensor.ecobee docs URL
* Use voluptuous for Hikvisioncam switch (#3184)
* Migrate to voluptuous
* Use vol.Optional
* Use voluptuous for Edimax (#3178)
🐬
* Use voluptuous for Bravia TV (#3165)
🐬
* Added support to 'effect: random' to Osram Lightify lights (#3192)
* Added support to 'effect: random' to Osram Lightify lights
* removed extra line not required
* Use voluptuous for message_bird, sendgrid (#3136)
* Try out the RTD theme
* Doc updates
* Update voluptuous for existing notify platforms (#3133)
* Update voluptuous for exists notify platforms
* fix constants
* Simple trend sensor. (#3073)
* First cut of trend sensor.
* Tidy.
* Migrate to voluptuous (#3193)
* Migrate to voluptuous (#3194)
🐬
* Migrate to voluptuous (#3197)
* Migrate to voluptuous (#3198)
🐬
* Use extend of PLATFORM_SCHEMA (#3199)
* Migrate to voluptuous (#3202)
🐬
* Updated to use the occupancy sensor_class (#3204)
🐬
* Migrate to voluptuous (#3206)
* Migrate to voluptuous (#3207)
* Migrate to voluptuous (#3208)
🐬
* Migrate to voluptuous (#3209)
🐬
* Migrate to voluptuous (#3214)
* Use voluptuous for SqueezeBox (#3212)
* Migrate to voluptuous
* Remove name
* Migrate to voluptuous and upgrade uber_rides to 0.2.5 (#3181)
* Migrate to voluptuous (#3200)
🐬
* Use Voluptuous for Luci and Netgear device trackers (#3123)
* Use Voluptuous for Luci and NEtgear device trackers
* str_schema shortcut
* Undo str_schema
* change update handling with variable for breack CCU2 (#3215)
* Update ordering (#3216)
* Docs update
* Flake8/pylint
* Add new docs requirements
* Update email validation (#3228)
🐬
* Fix email validation (fixes#3138) (#3227)
* Upgrade slacker to 0.9.25 (#3224)
* Upgrade psutil to 4.3.1 (#3223)
* Upgrade gps3 to 0.33.3 (#3222)
* Upgrade Werkzeug to 0.11.11 (#3220)
* Upgrade sendgrid to 3.4.0 (#3226)
* Bluetooth: keep looking for new devices (#3201)
* keep looking for new devices
* Update bluetooth_tracker.py
* change default value for tracking new devices
* remove commented code
* dlink switch added device state attributes and support for legacy firmware (#3211)
* Use voluptuous for free mobile (#3236)
* Use voluptuous for nma (#3241)
* Improve 1-Wire device family detection and error checking. Use volupt… (#3233)
* Improve 1-Wire device family detection and error checking. Use voluptuous
* Fix detection of gpio connected devices
* Replace rollershutter and garage door with cover, add fan (#3242)
* Use voluptuous for Alarm.com (#3229)
* Use voluptuous for gntp (#3237)
* Use voluptuous for pushbullet, pushetta and pushover (#3240)
* Migrate to voluptuous (#3230)
🐬
* Fix mFi sensors in uninitialized state (#3246)
If mFi sensors are identified but not fully assigned they can
have no tag value, and mficlient throws a ValueError to signal this.
This patch handles that case by considering such devices to always
be STATE_OFF.
* Use voluptuous for PulseAudio Loopback (#3160)
* Migrate to voluptuous
* Fix conf var
* Use voluptuous for Verisure (#3169)
* Migrate to voluptuous
* Update type and add missing config variable
* thread safe modbus (#3188)
* Upgraded fitbit to version 0.2.3 which fixed oauthlib.oauth2.rfc6749.errors.TokenExpiredError: (token_expired) (#3244)
* update ffmpeg version to 0.10 add get image to camera (#3235)
* Migrate to voluptuous (#3234)
* fix bugfix with unique_id (#3217)
* Zwave climate fix and wink cover. (#3205)
* Fixes setpoint get was done outside loop
* zxt_120
* Wink not migrated to cover
* Clarifying debug
* too long line
* Only add 1 device entity
* Owntracks voluptuous fix (#3191)
* Zwave set temperature fix (#3221)
* If device was off set target temp would not work.
* Changed to use a workaround just for Horstmann HRT4-ZW Zwave Thermostat
* Wrong Horseman id
* style changes
* Change PR to suggestion on gitter (#3243)
* Reload groups (#3203)
* Allow reloading groups without restart
* Test to make sure automation listeners are removed.
* Remove unused imports for group tests
* Simplify group config validation
* Add prepare_reload function to entity component
* Migrate group to use entity_component.prepare_reload
* Migrate automation to use entity_component.prepare_reload
* Clean up group.get_entity_ids
* Use cv.boolean for group config validation
* fix remove listener (#3196)
* Add linux battery sensor (#3238)
* protect service data for changes in calls (#3249)
* protect service data for changes in calls
* change handling
* move MappingProxyType to service call
* Fix issue #3250 (#3253)
* Minor Ecobee changes (#3131)
* Update configuration check, ordering, and constants
* Make API key optional
* issue #3250
* Add voluptuous to ecobee (#3257)
* Use constants and update ordering (#3261)
* Add support for complex template structures to data_template (#3255)
* Improve yaml fault tolerance and handle check_config border cases (#3159)
* Use voluptuous for nx584 alarm (#3231)
* Migrate to voluptuous
* Fix pylint issue
* fastdotcom from pypi (#3269)
* Use constants and update ordering (#3268)
🐬
* Use constants and update ordering (#3267)
🐬
* Add additional template for custom date formats (#3262)
I can live with a few visual line breaks 🐬
* Use constants and update ordering (#3266)
* Updated braviatv's braviarc version to 0.3.5 (#3271)
* Use voluptuous for Device Sun Light Trigger (#3105)
* Migrate to voluptuous
* Use default
* Point to master till archive is back (#3285)
* Pi-Hole statistics sensor (#3158)
* Add Pi-Hole sensor
* Update docstrings and remove print()
* Use None for payload
* Added stuff for support range setting (#3189)
* cleanup Homematic code (#3291)
* cleanup old code
* cleanup round 2
* remove unwanted platforms
* Update frontend
* Hotfix for #3100 (#3302)
* Fix TP-Link Archer C7 long passwords (#3225)
* Fix tplink C7 long passwords
Fixes an issue where passwords longer than 15 chars could not log in to Archer C7 routers.
* Truncate in correct place
* Add comment about TP-Link C7 pass truncation
* Fix lint error
* Truncate comment at 79 chars not 80
* modbus write registers service (#3252)
* Fix bloomsky platform discovery (#3303)
* Remove dev tag
* When using flash with hue, dont change the on/off state of the light so that it will naturally return to its previous state once flash is complete
* ATTR_FLASH not ATTR_EFFECT
* Host should be optional for apcupsd component (#3072)
* Zwave climate Bugfix: if some setpoints have different units, we should fetch the o… (#3078)
* Bugfix: if some setpoints have different units, we should fetch the one that are active.
* Move order of population for first time detection
* Default to config if None unit_of_measurement
* unit fix (#3083)
* humidity slider (#3088)
* If device was off target temp was null. Default to Heating setpoint (#3091)
* Fix for BLE device tracker (#3019)
* Bug fix tracked devices
* Added scan_duration configuration parameter
* fix homematic climate implementation (#3114)
* Allow 'None' MAC to be loaded from known_devices (#3102)
* Climate and cover bugfix (#3097)
* Avoid None comparison for zwave cover.
* Just rely on unit from config for unit_of_measurement
* Explicit return None
* Mqtt (#11)
* Explicit return None
* Missing service and wrong service name defined
* Mqtt state was inverted, and never triggering
* Fixed Homematic cover (#3116)
* Add missing docstrings (fix PEP257 issues) (#3098)
* Add missing docstrings (fix PEP257 issues)
* Finish sentence
* Merge pull request #3130 from turbokongen/zwave_fixes
Bugfix. climate and covermqt
* Back out insteon hub and fan changes (#3062)
* Bump version
* Special frontend build for 0.27.2
* Add support for new mqtt_json light platform.
* Fix W503 errors.
* Bring in feedback from @balloob.
* Add test coverage for invalid color and brightness data.
* Add coverage for transition in turn_off.
* Hyperion lets you turn it on and off
* Update hyperion to use recent API functions
The plugin now gets the active color from the server.
Add a configuration option "default_color" to customize the turn_on color.
* Make sure values are updated regardles of manual or frontend update,
* Devices with set_switch command was not happy with fast updating.
* Binary triggersensors command was not happy with refreshed updating.
* Add power attribute to switch.
* Move device_state_attributes into base class.
* Fix imports following refactor.
* Bump pyvera version - should add contributed support for older (UI5) version dimmers and locks.
* Refactor device lookup to be based on vera classes, push category back into library.
* Add generic power attribute, fix inherited class order bug.
* Tidy.
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
* Revert "Clamp brightness between 0 and 255"
This reverts commit c87238e8b5.
* Clamp brightness between 0 and 255
Change to ensure that values over 255 supplied by the config will be
clamed to a max value of 255.
Default behavior for warm/cold white channels is to assume the white
channel is mixed with the rgb. This is a sane default and should support
the Fibaro RGBW LED controller.
* Replace switch with lock
* Update docstrings
* Add link to docs
* Add link to docs and update docstrings
* Update docstring
* Update docstrings and fix typos
* Add link to docs
* Add link to docs
* Add link to docs and update docstrings
* Fix link to docs and update docstrings
* Remove blank line
* Add link to docs
* Basic implementation of Zwave Rollershutters
* Better filtering, by @wokar
* Fix typo
* Remove polling from component, and loop fix
* linter fix
* Filter to channel devices to correct component
* Remove overwriting of parent node name
* Insteon support for brightness
* Farcy fix for unused constants.
* Remove unused constant and fix whitespace.
* Prevent toggle switches from jumping between states.
* 255 not 256
* Added Osram Lightify light component
* Added color temperature and fade transition support to Osram Lightify
* Added Osram Lightify light component
* Added color temperature and fade transition support to Osram Lightify
* Updated docstring
* Added osramlightify to ignore list on coveragerc and updated docstrings
* Fixed linting issues
* Initial support for EnOcean
Tested to work with:
- Eltako FUD61 dimmer
- Eltako FT55 battery-less switch
- Permundo PSC234 (switch and power monitor)
* Rerun gen_requirements_all.py
* Add support for providing color_name which accepts a CSS3 valid, human readable string such as red or blue
* Forgot the schema validation!
* ugh farcy
* use html5_parse_legacy_color for more input options
* Add webcolors==1.5 to setup.py
* Block pylint no-member errors on tuple
* add color_name_to_rgb test
* whoops
* revert changes to individual platforms
* If color_name is set, pop it off params and set rgb_color with it
* Forgot to reset wink.py
* Import the legacy function as color_name_to_rgb directly
* reset test_color.py
* Improve light services.yaml
* Added QwikSwitch platform
farcy - worst than my english teacher
* Clean up comments
* Import only inside functions
* Moved imports, no global var, load_platform
* add_device reworked
* Only serializable content on bus
* Fixed imports & removed some logging
* Add MySensorsDeviceEntity class to hold the common attributes,
properties and methods for mysensors entities.
* Inherit from MySensorsDeviceEntity class in binary_sensor, light,
sensor and switch mysensors platforms.
* Remove not needed attribute and method for const in GatewayWrapper
class. The const attribute is already set in the wrapped object.
* Clean up state property for mysensors sensor entities.
* Inherit from MySensorsLightRGB in MySensorsLightRGBW class.
* Remove use of get_component in mysensors component and platforms.
* Clean up update method in MySensorsDeviceEntity class.
* Bump version of pymysensors to 0.6, which includes the tcp gateway.
* Update requirements_all.txt.
* Replace CONF_PORT with CONF_DEVICE and ATTR_PORT with ATTR_DEVICE.
* Add tcp_port in config.
* Try to guess if tcp or serial gateway is configured, by validating
device name as an ip address. If successful setup tcp gateway, if it
fails, setup serial gateway.
* Update device_state_attributes to show correct device, ethernet or
serial.
* set name to hyperion assets
by specifying the name in the configuration:
light kodi_xxx:
name: "Kodi XXX"
platform: hyperion
host: 192.168.1.222
port: 19444
* Update hyperion.py
fix extra space
The rewrite addresses a problem with the tellstick hardware dropping
commands when too many simultaneous calls is being made from HA. Also fixes a bug when the dim level was changed externally.
This breaks previous configurations.
The new config for tellstick is
```yaml
tellstick:
signal_repetitions: X
```
Lights and Switches are detected automatically.
Sensors work like before because they do not share any functionality with the other devices and they also needs a complete other configuration.
Converts 0..255 values that HA expects into a device 0..SCALE value
Example:
HA considers "hall light" at 25 brightness or 10% of 255
Device considers "hall light" at 100 brightness or 10% of 1000
This allows our existing MQTT devices to not change their data format to be used in HA
* Move S_LIGHT and V_LIGHT from light back to switch platform, to avoid
double devices showing.
* Remove MySensorsLightPlain class from light platform, since it's not
needed anymore.
* A light switch with only a switch, ie no dimmer or
RGB controls, will show as a regular switch device.
* Add mysensors binary sensor.
* Add discovery platforms to binary_sensor base component.
* Replace device_state_attributes with state_attributes in
binary_sensor base class.
* Fix docstrings.
* Add discovery of binary sensor to mysensors component.
* Add child.type as argument to mysensors device_class.
* Move binary sensor types from sensor to binary_sensor module.
* Fix binary_sensor attribute tests. Use state_attributes instead of
device_state_attributes.
* Add check if V_LIGHT is in values before sending message in
_turn_on_light.
* Replace super calls with self.
* Remove not needed init method in child classes.
* Remove turn_on method in parent class and add update_ha_state
to _turn_on_light, _turn_on_dimmer and _turn_on_rgb_or_w.
* Make a flatter one level inheritance, with MySensorsLight as parent
with four children, one per light type.
* Break out helper methods. One per plain light, dimmer and RGB/RGBW
children and per update, turn_on and turn_off, nine in total. Put
these in the parent.
* Call the helper methods as needed from the child methods update,
turn_on and turn_off.
* Change name of MySensorsLightLight to MySensorsLightPlain.
* Fix module docstrings according to pep257.
* Change name of color util method from rgb_hex_to_list to
rgb_hex_to_rgb_list.
* Add unit tests for rgb_hex_to_rgb_list.
* Add a light entity class per V_LIGHT, V_DIMMER, V_RGB and V_RGBW.
Make these classes inherit each other up to MySensorsLight class.
* Map the entity classes to their S_TYPE in a dict.
* Check if an entity class map or just an entity class have been passed
to pf_callback_factory before using the entity_class variable in
homeassistant/components/mysensors.py.
* Add rgb_hex_to_list function in homeassistant/util/color.py.
* Make light controllable independently with types V_LIGHT, V_DIMMER,
V_RGB and V_RGBW. V_RGBW is not implemented in the frontend yet.
* Add discovery for light platform.
* Add optimistic mode config setting for switch and light
to allow feedback state from actuator.
* Move S_LIGHT, V_LIGHT, V_STATUS types from switch to light platform.
* Change node update logging to debug from info level.
* Fix some inaccurate comments.
* The application of the version check in unit_of_measurement was
messed up after the last refactor. Fix that again.
* An error could occur in device_state_attributes if there was a
mismatch between used value_type in the device and mysensors
version in config. Add try... except to handle that.
Bump pyvera version.
Bump pywemo version.
Add unavailable status before properly initialised for maker and insight.
Major bugfix. ``` get_bulbs ``` and similar methods were always returning empty lists.
Better unit tests have been added to https://github.com/bradsk88/python-wink to avoid this regression.
Support the SCSGate device. This will allow home-assistant to interact
with BTicino/Legrand MyHome system.
Signed-off-by: Flavio Castelli <flavio@castelli.me>
Entity ids will now look like this:
sensor.philio_technology_corporation_psm021_slim_multisensor_doorwindow_sensor_7
sensor.philio_technology_corporation_psm021_slim_multisensor_luminance_7
sensor.philio_technology_corporation_psm021_slim_multisensor_motion_sensor_7
sensor.philio_technology_corporation_psm021_slim_multisensor_tamper_sensor_7
sensor.philio_technology_corporation_psm021_slim_multisensor_temperature_7
sensor.philio_technology_corporation_psm021_slim_multisensor_doorwindow_sensor_8
sensor.philio_technology_corporation_psm021_slim_multisensor_luminance_8
sensor.philio_technology_corporation_psm021_slim_multisensor_motion_sensor_8
sensor.philio_technology_corporation_psm021_slim_multisensor_tamper_sensor_8
sensor.philio_technology_corporation_psm021_slim_multisensor_temperature_8
And if there is several values of the same type in a node the instance id will be appended like this (three switches in the same device):
switch.fibaro_system_unknown_type0202_id1002_switch_9
switch.fibaro_system_unknown_type0202_id1002_switch_9_2
switch.fibaro_system_unknown_type0202_id1002_switch_9_3
Daniel Høyer Iversen
Joeboyc2
William Scanlon
Trevor
Johan Bloemberg
Teemu R
Martin Hjelmare
andrey-git
Fabian Affolter
Craig J. Ward
Adam Mills
thecynic
Aaron Polley
Matthew Garrett
Stefan Jonasson
Robbie Trencheny
John Arild Berentsen
Ryan Kraus
martst
Marcelo Moreira de Mello
Pascal Vizeli
Jared J
Magnus Ihse Bursie
Brent Hughes
Erik Eriksson
Daniel Hoyer Iversen
Paulus Schoutsen
Michaël Arnauts
Keaton Taylor
rubund
lichtteil
DaveSergeant
Antoine Bertin
Thomas Friedel
Jack Chapple
Sean Dague
jbcodemonkey
Jon Caruana
Hydreliox
John
mtl010957
Jeff Wilson
happyleaves
Teagan Glenn
Marc Pabst
Teagan Glenn
Assaf Inbal
Corban Mailloux
schneefux
Jesse Newland
Fabian Affolter
fotoetienne
Johann Kellerman
Greg Dowling
rhooper
Phil Kates
Warren Konkel
Olimpiu Rob
Nolan Gilley
Brad Johnson
Chema García
Dan
Jan Harkes
seedzero
William Scanlon
pavoni
Jon Maddox
bradsk88
Stefan Jonasson
St. John Johnson
Justyn Shull
Tim
Flavio Castelli
Harald Nagel
Flyte
Stefan Jonasson