* Update keyboard_remote.py
I added a couple of events: keyboard_remote_connected and keyboard_remote_disconnected, useful to trigger some action (for example: play a sound)
I changed the way the component refers to the keyboard: not by "descriptor", but by name.
The fact is that the udev system doesn't always give a name link in /dev/input/by-id folder and the actual /dev/input/eventX file changes automatically.
For example, if I had my keyboard on /dev/input/event13 and then it disconnected, if something else connects to the system it will get the first input file available, that is /dev/input/event13. If the keyboard then reconnects, it will get /dev/input/event14, thus breaking the configuration.
Now it searches every time for the right input file.
The problem might be that, in case of ha upgrade, the pre-existing configuration won't work. I thing there are some guidelines here, but I am not sure.
I think it's inevitable: the initial idea to use a /dev/input/by-id/ symbolic link was good, but unfortunately it doesn't seem to work with bluetooth devices.
I haven't updated the documentation yet: I'm waiting for some ok about the change in configuration key names.
* Update keyboard_remote.py
That should do the trick.
You are right: device names can be duplicated, thus they're not reliable in case of multiple devices. Unfortunately, the only other information available is the physical address, even more complicated.
But in case you have just one keyboard remote of same model, the name works just fine. I'll put it in the documentation which, once the code is approved, I will promptly update.
* Update keyboard_remote.py
* Update keyboard_remote.py
* Update keyboard_remote.py
* Unwrap logger error
* ASUSWRT: Add IPv6 support when parsing neighbors
The regex for IPv6 should cover most cases, but it doesn't validate
whether IP is correct. It also might fail for some edge cases.
Also, ignore 'duid xx:xx:xx:xx:xx:xx:xx:xx:xx:xx' line in leases.
Closes#2814 - ASUSWRT doesn't support ipv6
* Update asuswrt.py
* Added new platform sky_hub
* added env to virtual environment gitingore
* Removed unuseful imports
* BT home hub 5 renamed to sky hub in the comments
* Added sky_hub to .coveragerc
* Added example configuration in sky_hub docstring
* sky_hub made compliant with test style standards
* homehub functions renamed to skyhub
* Update .gitignore
* Update .coveragerc
* Move isdevice validator under helpers.config_validation.
* Check that all persistence files are set and are unique if any is set
by user. This is necessary to avoid file name clashes.
* Check that a set persistence file has an existing and writable
directory.
* Check that a device is either a valid device file, "mqtt", or a valid
domain name or ip address.
* [image_processing/microsoft_face_verify] face recognition for automation
* Add platform for microsoft face identify
* add unittest for demo
* Add unittest for platform
* add a small sleep before reading the sensor
The read of the sensor might be incorrect if it's read too soon after the setup_input call. It might be isolated to my case where I rely on the the PI internal PULL, but once I added this sleep I never get false initial read. If you think this change is appropriate please merge it.
* Update rpi_gpio.py
* Update rpi_gpio.py
* Update rpi_gpio.py
* Add missing dependency in emulated_hue component.
On first startup after upgrade to 0.36, the emulated_hue componented failed to
start because the http component had installed the modules it depends on, in
this particular case 'aiohttp_cors' was missing.
* Include dependencies for the emulated_hue web server
Emulated_hue uses it's own 'web-server' component to handle hue related
discovery and config, so we need to make sure the required http modules are
made available before we are initialized.
We don't have to depend on the home-assistant http/api component because we do
not need to have the frontend to be initialized to handle emulated_hue, so we
can just import in the same set of requirements as the http component.
* Fix linting error
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* check cec message length when asking physical address (#38) (#38)
* cec turn on/turn off commands instead of power
* cec turn on/turn off commands instead of power
* Using new MaxShutterContact class
* Skip unnecessary function calls
* Added casting for VALUE
* Some renaming to clarify what's happening
* Bumped dependency version
* Bumped version in requirements
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* Fixed crash when lights objects was inited
* Fixed initial value for tellstick lights
* Fixed problem with lights not working with the turn_on action.
* Remove SPEED_MED from fan
* Correctly use the oscillation on/off payloads for MQTT fan
* Add set_direction service documentation
* Correct function name for Wink fans
* Check for existence of the correct topic
* Enable set fan speed in emulated_hue
* features -> functions
* Final emulated_hue fan fixes
* Fix linting issues
* Revert to supported features instead of supported functions
* Fix logic
* Add a test for emulated_hue fan support
* Allow automatic removal of all Hue entities from emulated_hue
* Allow disabling of Hue groups
* Only add device state attributes if they need to be there
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* Configuration parameters defined
* Edge detection added
* Example configuration added and tipo corrected
* Comments updated, lint update
* Added check for input pull_mode
* Too long line
* trailing white space
* pylint disable import error
* read_input() changed to return boolean value, according changes in binary sensor
* example configuration in docstring changed to mention direct web link, pylint update
* read_input() updated according review
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* Updated ISY component to not overwrite state_attributes.
The ISY component included an ISYDevice base class that is used by all
of the isy994 platforms. This still overwrote the state_attributes
property instead of the more appropriate device_state_attributes
property. This was also repeated in the isy994 light platform. Both of
these were addressed. This also fixes issue #5428.
* Removed custom state attributes from ISY lights.
The brightness attribute need not be manually reported by the isy994
light platform.
* Removed ISY Node cleanup.
The ISY entities don’t really need to unsubscribe themselves while hass
is shutting down. Because these updates are not sent in a thread, there
is no negative impact from shutting down without unsubscribing. This
greatly speeds up hass shutdown.
* Removed unused attribute from isy994 light platform.
* Cleaned up ISY994 light entity class.
1) Removed the state property. This property is set in the Entity base
class and shouldn’t be overridden here.
2) Set the brightness property. This is the proper way of setting the
brightness for the Light base class.
3) Removed properties that are now unused because of these changes.
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Initial commit of anthemav platform. It loads but has no purpose.
* Now presents a card in the UI but the values aren't real
* Mute and volume polling/setting work now
* Source lists and selection works now.
* Reduce debug logging verbosity
* Support power on/off and skip polling for details if power is off
* Add some static tables to decode numerics from telnet commands
* Add stub for unsupported media_play
* New style anthemav uses native asyncio structure
* Add device callback for asyncio
* This is ugly but it works
* Simplify async setup and abstract class data retrieval
* Implement commands (power on and power off for now)
* Add support for scan_interval and set default to 120 seconds
* Pass-through to package handlers for volume and input selection
* Slight restructuring to satisfy anthemav 0.9
* Load anthemav package from pypi now that it's registered
* Proper app_name from a/v info
* Mispelled word
* media_player/anthemav initial commit of platform requirements
* Philio 3-in-1 Gen 4 zwave sensor needs the no-off-event workaround. (#5120)
* Add print_config_parameter service to Z-Wave (#5121)
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* Conform to Python/project style requirements
* Making pylint happy
* Bring pip requirements in agreement with the code
* Bungled previous update
* Remove unnecessady SCAN_INTERVAL logic
I was unawre that this is performed as part of the normal platform behavior and
it's unnecessary for a platform to independently implement this logic.
* Refactor code based on @armills PR requests
* Re-add media_play stub to avoid traceback
* Align with platform reqirements
* Remove references to SCAN_INTERVAL and clean up _lookup logic
* Add DEFAULT_PORT assignment
* Code style changes and removal of vestigial structures
* CONF_NAME handling changes to allow local override to default from device
* Address PR feedback from @balloob
* Remove media_play function override
It's no longer necesary for the platform to implement a stub media_play
function override now that the Add SUPPORT_PLAY flag #5181 issue has been
resolved and merged into the dev branch.
* Rename callback function to async_ for clarity
* Use async routines for platform methods
* Convert update callback to coroutine for conformity
Underlying anthemav library now properly supports coroutine callbacks instead
of normal functions. Converted the platform callback to a coroutine for
conformance with async operation for the device.
Special thanks to @pvizeli and @armills for their invaluable remedial Python
instruction!
* Further callback refinements
Altered the nature of callback handling based on suggestions from @pvizeli
* True not needed for local push update_ha_state
* Small style fix
After _control_heating() is executed, current_operation() is correctly called but _is_device_active() still reports the old state if the heater switch, at least in my case. The resulting climate state is incorrect until the next refresh, which apparently occurs only when _sensor_changed() gets called (it can be minutes after).
I think the state of the heater switch should be forced to update at the end of _control_heating(), but I don't know how to do that...
A simple sleep() fixes it, but obviously is just a temporary workaround, I'm not really expecting this PR to be actually committed, unless there's no other solution.
* Added tado device tracker
* Added tado device tracker to .converagerc
* Updated docs
* Code formatting and removed unused import
* Code formatting and removed unused import
* Respected the lint line length
* Respect pydocstyle rules
* Respect the lint line limit length
* Fixed reviewer feedback
* Changed the tracker to support async
* Respect the New line end of file rule
* Update .coveragerc
* Improved x10 state monitoring
* Improved x10 state monitoring
* Use update mthod to fetch state change
* Use update mthod to fetch state change
* Use update function to fetch status
* remove temp file
* Add doc string to update method
* denonavr: Expose input as title when in non playing modes
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denon: Pop from the intended end of the list
Pop from front of list, so we start with NSE0, then NSE1X and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Don't provide broken media_url's
Only return a media_url if we're in a state that might provide one.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Only expose player support when in a player mode
This changes so the denonavr only exposes the media player support, when
in a mode that supports media playing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add listing and selection of available MPD playlists through input source UI.
* MPD support updating playlist list on the fly as well as at turn-on.
* Added no_throttle to force playlist update on mpd power cycle.
* Added kwargs signature to get Throttle working right.
* Initial commit of discord notification component
* Fixed error where script added extra entries to .coveragerc
* Cleaned up code
* Compliance to PEP8
* removed dependencies
* readded dependencies
* changed name of client id to token for configuration
* Changes for Hound
* Incorporated Review Feedback
* Review feedback
* Updated requirements file
* Check compliance
* Introduced Amcrest camera sensors
* Makes script/gen_requirements_all.py happy
* Bump Amcrest version across all components
* - Adjusted scan_interval to 10 seconds
- Filtering HTTPError and ConnectTimeout exceptions
- Removed @Throttle decorator
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
* Made target temperature sensitive to auto mode
* Used current_operation instead of operation_mode
* When not in auto_mode, the temperature is sent to set_temperature
* Low and high targets are switched in the call to set_temperature.
* Missed on current_operation. Use STATE_AUTO.
* Remove incorrectly checked in directory.
* Updated set_temperature based on Martin's feedback.
* Use ATTR_TEMPERATURE from const.py
Traceback (most recent call last):
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/helpers/entity_component.py", line 151, in _async_setup_platform
entity_platform.add_entities, discovery_info
File "/usr/local/lib/python3.5/asyncio/futures.py", line 361, in __iter__
yield self # This tells Task to wait for completion.
File "/usr/local/lib/python3.5/asyncio/tasks.py", line 296, in _wakeup
future.result()
File "/usr/local/lib/python3.5/asyncio/futures.py", line 274, in result
raise self._exception
File "/usr/local/lib/python3.5/concurrent/futures/thread.py", line 55, in run
result = self.fn(*self.args, **self.kwargs)
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 48, in setup_platform
add_devices([USPSSensor(session, config.get(CONF_UPDATE_INTERVAL))])
File "/home/hass/.virtualenvs/home_assistant/lib/python3.5/site-packages/homeassistant/components/sensor/usps.py", line 58, in __init__
self._profile = myusps.get_profile(session)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 100, in wrapped
_login(*args)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 90, in _login
_save_cookies(session.cookies, session.auth.cookie_path)
File "/home/hass/.homeassistant/deps/myusps/__init__.py", line 41, in _save_cookies
with open(filename, 'wb') as handle:
PermissionError: [Errno 13] Permission denied: './usps_cookies.pickle'
Removing redundant throttle decorator on update method. This ensures the existing 'cache-value' config option is respected. Also, UPDATE_INTERVAL is renamed to DEFAULT_UPDATE_INTERVAL for clarity.
* Add support for direct MJPEG streams from Amcrest cameras
The previous implementation relied on using snapshots from the camera. However,
some Amcrest models cannot keep up with the large number of requests and
instead timeout, resulting in no video stream. These cameras do provide MJPEG
streams though, so this commit adds the option to use these instead of creating
one from snapshots.
Unfortunately, some cameras on newer firmwares do not support MJPEG streams at
high resolution - only at low resolution.
By providing users with both a `resolution` and `stream_source` option, we can
allow them to choose whichever combination works for their particular model
and firmware version.
* Close the stream instead of releasing it
* Close stream without creating a task
* Handle client aborts
* fix lint
* Added Yandex SpeechKit TTS
* Added test stub
* Added two test and added property for yandex tts
* Copy all test from voice rss
* Added test vith different speaker and code style changes
* Added new line to end of file
* Url format replaced with url_params
* Fix typo
* Auto-config for `sensor.bom`
Deprecate (but still support) the old two-part station ID, and move to a
single `station` identifier. Any combination of these, including none,
is valid; most results in downloading and caching the station map to
work out any missing info.
* Add `weather.bom` platform
Very similar to `sensor.bom`, but supporting the lovely new `weather`
component interface. Easier to configure, and does not support the
deprecated config options.
* Review improvements to BOM weather
Largely around better input validation.
* Add mysensors notify platform
* Make add_devices optional in platform callback function.
* Use new argument structure for all existing mysensors platforms.
* Add notify platform.
* Update mysensors gateway.
* Refactor notify setup
* Enable discovery of notify platforms.
* Update and add tests for notify component and some platforms.
* Continue setup of notify platforms if a platform fails setup.
* Remove notify tests that check platform config. These tests are not
needed when config validation is used.
* Add config validation to APNS notify platform.
* Use discovery to set up mysensors notify platform.
* Add discovery_info to get_service and update tests
* Add discovery_info as keyword argument to the get_service function
signature and update all notify platforms.
* Update existing notify tests to check config validation using test
helper.
* Add removed tests back in that checked config in apns, command_line
and file platforms, but use config validation test helper to verify
config.
* Add a test for notify file to increase coverage.
* Fix some PEP issues.
* Fix comments and use more constants
* Move apns notify service under notify domain
Added support for additional optional configuration
arguments:
to send to vlc.
It is useful for special configurations of VLC.
For example, I have two sound cards on my server, so I defined two vlc media players:
media_player:
- platform: vlc
name: speaker_1
arguments: '--alsa-audio-device=hw:1,0'
- platform: vlc
name: speaker_2
arguments: '--alsa-audio-device=hw:0,0'
This way, by specifying the corresponding entity_id, I can send the output to the desired speaker.
It is also useful for TTS.
* Revert #4791 and fixes#4696
* Update influxDB based on PR comments
* Add migration script
* Update influxdb_migrator based on PR comments
* Add override_measurement option to influxdb_migrator
* Rename value field to state when data is string type
* Fix influxdb cloning query
* Add support for Zengge Bluetooth bulbs
Adds support for the Zengge Bluetooth RGBW bulbs. These are sold under a
number of brands, including Flux. The bulbs do not support full RGBW
control - they turn off the RGB LEDs when white is enabled, and vice versa.
* Update zengge.py
* Initial commit for Wink fan support
* Added fan to discovery list
* Raise NotImplementedError and fixed is_on
* Added speed property
* Update __init__.py
* eq3btsmart: support modes and clean up the code to use climatedevice's features
* eq3btsmart: re-add device state attributes
adds reporting for is_locked, valve, window_open and low_battery,
exposing everything the device reports currently.
* eq3btsmart: bump version req
* eq3btsmart: fix a typo in mode name, report unknown when not initialized
* eq3btsmart: depend on newly forked python-eq3bt lib, pythonify states
* [Device Tracker] Xiaomi Mi Router integration as device tracker
This device tracker allow to track device connected to Xiaomi Router.
Parameter: host, username (default admin) and password.
* [Device Tracker] Addition of Xiaomi device tracker file in coverage
* Use SHA hash to make token harder to guess
Use hashlib SHA256 to encode object id instead of using it directly.
* Cache access token
Instead of generating a token on the fly cache it in the constructor.
* Fix lint
* adding a default icon "blind" to a PowerView blinds scene.
* Adding icon property to define blind icon. Removed it from the state attributes dict.
* fixing lint error
async_volume_up / async_volume_down should be async versions of
volume_up / volume_down, not a async version of the default variants of
volume_up / volume_down.
The previous code always called into the mediaplayers set_volume_level,
and never into volume_up / volume_down.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Add Lannouncer notify component
* Send message by opening a raw TCP socket instead of using requests. Cleanup of method validation.
* Use 'return' instead of 'return None'
* Fix#5188 by Closing the stream instead of Releasing it
Closing just terminates the connection, release attempts to download all the contents before closing. Since the MJPEG stream is infinite, it loads and loads content until the python script runs out of memory.
Source: 50b1d30f41/aiohttp/client_reqrep.py (L668-L672)
* Update mjpeg.py
* platform set-up begin components
* lights seem to be getting set up properly, not sure why they aren't being added...
* typo
* Dependencies line
* toggle working
* toggle working
* added the switch to insteon_local
First commit hope to test tonight or in the morning
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* move dependency declaration before import?
* Move dependencies in Switch
* Update insteon_local.py
* wait for response
* switched the while to an if
switched the while 'cmd2' not in resp: to an if 'cmd2' not in resp: this seems to have the updater working
* Switched the while sleep loop to an if
switched the wile cmd2 not ins resp to be if cmd2 not in resp seems to be working.
* Update insteon_local.py
* import statement
Updated the import statement to import the instance of the insteon_local component not the hub Instance.
* updated import and the device assignment
update the import to import the instance of the insteon_local component not the hub.
* more changes to support the import change
* more changes to support the import change
* change to hass.data and add loop logic
* &&
* Update insteon_local.py
* Update insteon_local.py
* logic fixes and throttle
* reduce polling time
* brightness support
* import util
* hound fixes
* requirements file
* more hound fixes
* newline
* newline weirdness
* lint fixes
* more lint fixes
* switch state
* Update insteon_local.py
* log cmd2 for debugging
* assume success
* remove check for none
* fix comments
* fix comments again
* fix comments, add fixed version of lib, add support for timeout, add support for port, handle invalid login and connection problems
* fix logging exception
* fix hounceci-bot errors
* fix hounceci-bot errors
* requirements fix
* unique-id changes
* make dimmer off use saved ramp rate
* configurator working for lights
* configurator working for switches?
* configurator working for switches?
* include model names and fix lint errors
* lint fix
* fix exception order
* lint fixes
* fix lint errors
* update to use insteon local 0.38
* fix device id
* move status check to library
* move status check to library
* add SKU to setup
* lint fixes
* requirements
* linting
* Refactor of Squeezebox connection code
* Refactor of Squeezebox connection code
* Typos
* Make Python 3.4 friendly
* Addressing comments
* Improving docstring
* Using discovered port
* Style better
* Accept new disco object
* Revert "Accept new disco object"
* Make it obvious that port isn't discovered yet
* Flake8. ;)
* Re-enabled Weather Sensors for the ISY component.
As the ISY component had been updated to support newer components and
have better UOM support, the support for ISY’s weather module was
dropped. This adds that support back into Home Assistant.
* Cleanup of the ISY Weather support.
Cleaned up the for loops used to generate nodes representing weather
data from the ISY. Moved the weather_node named tuple to the top of the
file so that it can be more easily identified.
* Update isy994.py
* Update scan_interval and interval_seconds max to 1 day vs. 60 seconds
* Format fixes
* Add docstring on unittest.
* Added and implemented new async_track_time_interval helper.
* Format fixes, removed unused import.
* Undid whoops on unsub_polling.
* Updated unit tests for scan_interval.
* Added unit test for track_time_interval.
* Allow other forms of time interval input for scan_interval and interval_seconds
* Update keyboard_remote.py
I changed os.path.isFile() to os.path.exists: as far as I know isFile doesn't work with device files. At least on my Ubuntu it wasn't working.
Then I added some error control in case the keyboard disconnects: with bluetooth keyboards this happen often due to battery saving. Now it reconnects automatically when the keyboard wakes up.
We could fire an event to hass when the keyboard connects-disconnects, maybe I'll do this later.
We should also manage errors due to permissions problems on the device file, or at least give some info in the docs about how to allow HA to grab control over an system input file.
I'm sorry if my coding isn't up to some standard practice I'm not aware of: I'm new to HA and to python itself, I'm just trying to be of help.
Gianluca
* Update keyboard_remote.py
I changed some other few things.
Not the component gets loaded even if the keyboard is disconnected. When it connects, it starts to fire events when keys are pressed.
I also added a sleep(0.1) that reduces a lot the load on the CPU, but without many consequences on key pressed detection.
* Spread the traffic to yr.no servers and remove yr.no from the default config
* use unique address for yr.no
* update yr tests
* Wait 10 min extra before requesting new data
* Update config.py
* Update yr.py
* Add support for Tikteck Bluetooth bulbs
Adds support for the Tikteck RGBW BLE bulbs. These don't provide "true" RGBW
support - at a certain point in RGB space, the white LEDs turn on. Each bulb
has a specific key that needs to be extracted from the Android app.
* Update tikteck.py
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Refactor tellstick code for increased readability. Especially highlight if "device" is a telldus core device or a HA entity.
* Refactor Tellstick object model for increased clarity.
* Update comments. Unify better with sensors. Fix typo bug. Add debug logging.
* Fix lint issues.
* Remove global variable according to hint from balloob.
* Better async/threading behavior for tellstick.
* Fix lint/style checks.
* Use hass.async_add_job
* Add ability to set rpi_rf `tx_repeats` attribute
Uses the current `rpi_rf` default of 10
Closeshome-assistant/home-assistant#5069
* Use `signal_repetitions` instead of `repeats` for consistency
Adding the device_id key to the bevice tracker component allows selecting the bluetooth device to use in case the default device does not have BLE Capabilities
Rather than rely on base_url being unconfigured and therefore be
set as the host ip in the api component, get the local ip directly.
Use server port from the http component instead of the api component
where it will be None if base_url is set.
Change the exception catch meant to check for ipv4 vs ipv6 to wrap the
address encoding only instead of the zeroconf service info declaration.
* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* ecobee_set_fan_min_on_time: fix issue using 'entity_id' field and add service field help text
* climate.ecobee: add 'resume_program' service
* Add default value for resume_all and correct entity_id field name reference
* Allow to specify TTS language in the service call.
* Allow to specify TTS language in the service call.
* Respect 79 char limit
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Fix "Too many blank lines"
* Change language to be optional parameter of *get_tts_audio
* Change language to be optional parameter of *get_tts_audio
* Respect 79 char limit
* Don't pass "None
* Use default of "None" for TTS language
* Use default of "None" for TTS language
* Don't pass "None"
* Change TTS cache key to be hash_lang_engine
* Change language from demo to en
* Fix wrong replace
* Add sensor for International Space Station
* Change two sensors to one with attributes.
* Fix due to comments in HA PR. Thanks !
* Update Requirement
* emulated_hue: fix alexa "device not responding"
we need to set the brightness to 100 for devices that only turn on
* emulated_hue: dont override brightness for scenes/scripts
* emulated_hue: python and semi-colons
* emulated_hue: fix output brightness level
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Fix Sonos album art for non-radio streams
* Revert "Fix Sonos album art for non-radio streams"
This reverts commit d71502d18f.
* Fix Sonos album art for non-radio streams
* Move art existance check into _format_media_image_url
* Add support for the Sonarr URL Base setting
For those of us who have sonarr hidden behind reverse proxy under a path, we need to be able to pass the path
Adds urlbase: XXX to the sonarr yaml... Match it to what you have set in Sonarr (Settings>General>URL Base)
* Fix line lengths
* Fix trailing white space caused by last change
* Removing use of len()
* Updates TP-Link switches dependent module
Refactors code to use the new module API
* Set TP-Link Switch name from the device settings
If no name has been set in the configuration file the name set on the device will be used
* Removes default name for TP-Link switch
Fallback to device alias now works properly
* Removes logging
* Updates comment to denote support for HS200 switch
Updated the schema check to accept any string
Search custom sources in app title and app id
The makes the short list redundant and thus removed
Tested by adding livetv, netflix, youtube, makovod and others
This is also compatible with the list that was supported till now
so current users won't see any difference.
Signed-off-by: Roi Dayan <roi.dayan@gmail.com>
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Removed return False so the Panasonic Viera TV can be added even if it doesn't connect
* Remove try/except to connect to the TV
* Update panasonic_viera.py
* Update panasonic_viera.py
Robbie Trencheny
Janne Grunau
Gianluca Barbaro
Pascal Vizeli
thecynic
Oleksii Serdiuk
Alessandro Mogavero
Paulus Schoutsen
Stu Gott
Nick Touran
Martin Hjelmare
happyleavesaoc
snagytx
Jan Harkes
William Scanlon
Fabian Affolter
David McNett
Fabian Affolter
ecksun
Aaron Polley
andrey-git
Petr Vraník
Marcelo Moreira de Mello
Daniel Perna
Matthew Garrett
Craig J. Ward
Greg Dowling
Stefan Jonasson
joopert
Dale Higgs
Lupin Demid
John Arild Berentsen
Martin Vacula
Adam Mills
Daniel Høyer Iversen
Ryan Kraus
HerrHofrat
Daniel Hoyer Iversen
Touliloup
Alex
Bill Nelson
Whytey
R1chardTM
anpetrov
Johan Bloemberg
Job Vermeulen
martst
Giel Janssens
Anton Lundin
Christiaan Blom
Tom Dickman
Teemu R
Bryce Edwards
Heiko Rothe
Duoxilian
whhsw
freol35241
Colin O'Dell
Zac Hatfield Dodds
Thibault Cohen
Michaël Arnauts
Johann Kellerman
Touliloup
Dan Cinnamon
Thom Troy
Pascal Bach
pavoni
Andrew Williams
Valentin Alexeev
sander76
Terry Carlin
St. John Johnson
Paulus Schoutsen
markferry
dasos
Lewis Juggins
Jared J
webworxshop
Sander de Leeuw
Brent Hughes
doudz
Dan Smith
Gopal
Florian Holzapfel
Oliver
Magnus Ihse Bursie
Nathan Henrie
Giannie
Brandon Weeks
Mike Hennessy
eieste
jtscott
Mark
Felix
Jesse Newland
Brian Torres-Gil
Hydreliox
abmantis
Josh Nichols
John Mihalic
Hugo Dupras
Nick Sabinske
Georgi Kirichkov
Erik Eriksson
Albert Lee
Ashura
Nolan Gilley
Roi Dayan
Magas