* Add support for battery level to Yale Access Bluetooth
* fix
* bump
* bump
* bump
* bump
* fix
* bump
* battery level is always an estimate from voltage, but than again it always is for every device
* bump
* review
* bump again to fix slow start
* other one
* Copy google_sheets to google_assistant_sdk
This is to improve diff of the next commit with the actual implementation.
Commands used:
cp -r homeassistant/components/google_sheets/ homeassistant/components/google_assistant_sdk/
cp -r tests/components/google_sheets/ tests/components/google_assistant_sdk/
find homeassistant/components/google_assistant_sdk/ tests/components/google_assistant_sdk/ -type f | xargs sed -i \
-e 's@google_sheets@google_assistant_sdk@g' \
-e 's@Google Sheets@Google Assistant SDK@g' \
-e 's@tkdrob@tronikos@g'
* Google Assistant SDK integration
Allows sending commands and broadcast messages to Google Assistant.
* Remove unnecessary async_entry_has_scopes check
* Bump gassist-text to fix protobuf dependency
HA OS 9.4 adds support for passive scanning, however
a different path is used in dbus-fast to get the passive
results which was never optimized which caused passive
scanning to use more cpu time than active scanning.
changelog: https://github.com/Bluetooth-Devices/dbus-fast/compare/v1.75.0...v1.79.0
* fan.set_percentage + tests
* let's see what is not yet covered
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* tests fix
* vallox_websocket_api 3.0.0
* more coverage
* test coverage
* Update tests/components/vallox/test_fan.py
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* raise exceptions on user input
* Supported features are different per preset mode.
* Test fixes
* Static supported features is back.
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add matter base (#79372)
Co-authored-by: Marcel van der Veldt <m.vanderveldt@outlook.com>
* Add matter server add-on flow (#82698)
* Add matter server add-on flow
* Fix stale error argument
* Clean docstrings
* Use localhost as default address
* Add matter websocket api foundation (#82848)
* Add matter config entry add-on management (#82865)
* Use matter refactored server/client library (#83003)
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Bump python-matter-server to 1.0.6 (#83059)
* Extend matter websocket api (#82948)
* Extend matter websocket api
* Finish docstring
* Fix pin type
* Adjust api after new client
* Adjust api to frontend for now
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
If the keys changed for the yale locks, the locks would be
slow to setup. Because august had yalexs_ble as an
after dep, it would be waiting with the new keys but not
able to setup because it was waiting for the locks to setup
which would be trying over and over until they failed because
the key had changed out from under it.
This change moves some more code into the lib to avoid
the dep and allows both to startup at the same time so
the cloud service can feed the new keys in if needed without
waiting for the lock to fail to setup
changelog: https://github.com/bdraco/yalexs-ble/compare/v1.9.8...v1.10.0
* Add climate platform
* Enable climate plarform
* Some adjustments after review
* fixup! Add climate platform
* Rename description to avoid confusion
* No need to pass None
* Rename with nibe prefix
* Handle possible translations of values
* Make sure we prune None contexts
* Switch to constants from library
* bump python-bsblan version to 0.5.8
* add static_state
this holds values that only needs retrieving once in a while
* update diagnostics json with the right info
* Bump aiotractive, start handling authorzation errors when reading events
* Bump aiotractive, start handling authorzation errors when reading events
* Properly handle unauthorized errors
* Update homeassistant/components/tractive/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Use await when unsibscribing after auth error
* Update homeassistant/components/tractive/__init__.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
* Offload platform specific bluetooth code to bluetooth-adapters
* adjust
* fix some more patch targets
* more test fixes
* almost there
* may not be setup yet
* more fixes
* fixes
* fix test
* fix merge
* Addition of battery level sensor. Correction of pylint errors
* Review improvement for typing
* Review improvement for typing
* Correction following review
* Use HERE API v8
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Add migration
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Catch correct voluptuous error
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Use list comprehension for transit values
* Add migration alternative
Signed-off-by: Kevin Stillhammer <kevin.stillhammer@gmail.com>
* Implemented RestoreEntity
Merged commit conflict
* removed accidental change
* Update homeassistant/components/dynalite/dynalitebase.py
Co-authored-by: Erik Montnemery <erik@montnemery.com>
* added tests for the state
* added tests for switch state
* moved to ATTR_x and STATE_x instead of strings
some fixes to test_cover
* moved blind to DEVICE_CLASS_BLIND
* used correct constant instead of deprecated
* Implemented RestoreEntity
* removed accidental change
* added tests for the state
* added tests for switch state
* moved to ATTR_x and STATE_x instead of strings
some fixes to test_cover
* fixed isort issue from merge
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Bump gcal_sync to 4.0.1
This reverts test chagnes from PR #81562 that were actually incorrect given
the calendar "get" API returns less information that the "CalendarList" api.
* Initial support for modbus
* Complete test coverage of config flow
* Bump to 1.1.0 with corrected numbers
* Handle missing mapping for reset-alarm
* Fixup type checks after library bump
* Adjust coil number
* Move word_swap to nibegw
* Adjust to 1.1.2 with fixes
* Add series property
* Add S series models
* Correct test for invalid host
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* Move some things into library
* Adjust strings somewhat
* Correct black
* Correct test after validation change
Co-authored-by: J. Nick Koston <nick@koston.org>
* Added initial files for air-Q integration
* Allow FIXME comments in pylint (temporary)
Also reintroduce --ignore-missing-annotations=y
* Set up air-q entry to connect to aioairq's API (initial attempt)
Also add necessary constants
* Implement a class for sensors and its update logic
Very early stage, WIP
* Zeroconf and authentication are working
* Complete the bare-bone minimal working version
Specifically, make AirQSensor update its values.
* Handle invalid authentication gracefully
* Handle ClientConnectionError gracefully
* Add field hint for the login form
The key in the schema, which defines the form in
`ConfigFlow.async_show_form` is looked up in both `airq/strings/json`
and `airq/translations/en.json`. I am still not 100% sure how this
lookup is performed. WIP
* Minor cleanups
* Extend sensor list to all supported by SensorDeviceClass
Also manage warming up sensors
* aioairq is published to PyPI and mentioned in requirements
* Reordered constants and list content alphabetically
As required by style guides. Also turned SENSOR_TYPES to a list
* Updated file docstrings for a dev unfamiliar w/homeassistant like myself
* Adding a bit of logging for the integration setup process
* Expose scan interval & smoothing flag
Also streamline test_authentication in config_flow.
* Fix a type annotation mistake
* Use as many constants from homeassistant.const as possible
My only concern is using CONST_IP_ADDRESS = "ip_address" for smth which
stands for both IP address and mDNS...
* Temporarily rollback ConfigFlow.async_step_configure and use defaults
TODO: implement OptionFlowHandler instead
* Define custom Coordinator, w subset of airq config
The latter is then accessed from entity / sensor constructors to define
correct DeviceInfo
* Provide translations to de & fr + minor changes to en
* Provide translations to ru + a minor en changes
* Make translation a little more helpful and polite
* Fix devicename and entry title
* Remove stale commented out code
* Test config_flow
At this point two helper functions which interact with the external
library are not tested
* Clean up unrelated and meant as temporary changes
* Clean up unnecessary comments meant for internal use
* Move fetching config to a dedicated async coordinator method
As opposed to it being a potentially poorly justified step in
async_setup_entry
* Remove zeroconf support since it is not yet ready
* Remove translations other than en
* Remove unnecessary comments, manifest.json entries, and constants
* Improve exception handling
- `_LOGGER` uses `debug` and not `error` levels.
- Drop `ClientConnect` and catch `aiohttop.ClientConnectError` directly
- Drop `Exception` as it is not expected from `aioairq` (remove the
corresponding test too)
* Drop strings for obsolete errors and steps
Specifically, `unknown` error isn't caught any more. `configure` step
has also been removed.
* Refactor en.json to be consistent with strings.json
* Move target_route from a coordinator argument to a constant
At this point a user cannot configure the target_route route, thus it
does not make sense to expose it half-heartedly in
`AirQCoordinator.__init__`, since it cannot be accessed.
* Fix an async call in `AirQCoordinator.async_setup_entry`
* Refactor underlying aioairq API
- Use `homeassistant.helpers.aiohttp.async_get_clientsession` and pass a
single persistent session to `aioariq.AirQ.__init__`
- `aioairq.AirQ.fetch_device_info` now returns a `DeviceInfo` object heavily
inspired and almost compatible with `homeassistant.helpers.entity.DeviceInfo`.
Make heavier use of this object and define a single `DeviceInfo` in the
`AirQCoordinator` (instead of recreating the same object for each sensor
of the device in `sensor.AirQSensor`)
- Drop two helper functions in `config_flow.py` and operate on `aioariq.AirQ`
methods directly
* Fix the version of aioairq
* Add 15 more sensors + icons
* Remove cnt* & TypPS, change units of health & performance
* Add 12 more sensors
* Add a missing icon
* Gracefully handle device not being available on setup
If the device and the host are not on the same WiFi,
ServerTimeoutError is raised, which is caught by
ClientConnectionError.
If the device is powered off, ClientConnectionError is expected.
In both cases, ConfigEntryNotReady is raised, as prescribed by the docs.
Newer version of aioairq times-out far quicker than the default 5 mins.
* Rename two sensors
* Validate provided IP address / mDNS
aioairq now raises InvalidInput if provided IP / mDNS does not seem
valid. Handle this exception correctly
* Apply suggestions from code review
Clean up the comments and rename the logger
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during the first refresh
- Fetched info is stored in AirQCoordinator.device_info.
- In `AirQSensor.native_value` only multiply by the factor if
the sensor reading is not None
- Fix the tests for ConfigFlow for aioairq==0.2.3. Specifically
make the dummy data pass the new validation step upstream
+ add a test which fails it
* Drop custom device classes for now
* Apply suggestions from code review
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Only fetch device info during ConfigFlow.async_step_user
Store the result obtained by `airq.fetch_device_info` it in
`config_entry.data`. Pass the entire config entry to `AirQCoordinator`
and build the entire `homeassistant.helpers.entity.DeviceInfo` in the
`AirQCoordinator.__init__`. This makes
`AirQCoordinator._async_fetch_device_info` and overloaded
`AirQCoordinator._async_config_entry_first_refresh` obsolete.
Bump aioairq version.
Turn update_interval from `AirQCoordinator.__init__` argument into a
contestant.
* Custom entity description exposing a hook to modify sensor value
Use a `AirQEntityDescription` with a callable `value_fn` which allows to
change the sensor value retrieved from the device. Note that the
callable does not handle data retrieval itself (even from
`coordinator.data`). Instead it is purely a hook to transform obtained
value.
* Avoid duplicated use of unique_id
Device info is fetched during the `ConfigFlow.async_user_step`.
`unique_id` is taken from the device info and is **not** stored
in `config_entry.data`. Subsequently `config_entry.unique_id` is
used instead.
* Drop unnecessary try-except
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
* Clarify the use of value_transform_fn
* Refactor the use of lambdas in AirQEntityDescription
Now it is the job of the callable under `value` to get the sensor
reading from the coordinator's data. Factoring this functionality into a
callback decouples the key of the description from the key of dict,
returned by the API, so `AirQEntityDescription` no longer requires its key
to be set to smth clearly internal (e.g. `nh3_MR100`).
* Use a callback to update native_value
Since all `native_value`s are updated synchronously, it can as well be
done in a callback for better state consistency (right?)
* Revert the description keys to match data keys
Must match given the current way of identifying available sensors. On a
broader scale, they must match to be able to relate the descriptions to
sensors, unless a separate lookup table is maintained.
* Reduce number of loops when adding sensors
Filtering warming up sensors and non-sensor keys can be combined with
adding entities.
* Remove obsolete imports
* Update integrations.json
* Add integration_type
Integration supports multiple devices => hub
Co-authored-by: dl2080 <daniel.lehmann@runbox.com>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Co-authored-by: Artem Draft <Drafteed@users.noreply.github.com>
Co-authored-by: Daniel Lehmann <43613560+dl2080@users.noreply.github.com>
Co-authored-by: Martin Selbmann <job@martin-selbmann.de>
* Bump bleak-retry-connector to 2.8.2
Tweaks for the esp32 proxies now that we have better error
reporting. This change improves the retry cases a bit with
the new https://github.com/esphome/esphome/pull/3971
* empty
Maximilian
J. Nick Koston
Avi Miller
Kostas Chatzikokolakis
Kevin Stillhammer
Maarten Weyns
Shay Levy
Erik Montnemery
tronikos
Jeef
Allen Porter
Bram Kragten
Nathan Spencer
Aaron Bach
Marcel van der Veldt
David F. Mulcahey
Joakim Sørensen
Guido Pio Mariotti
Franck Nijhof
Daniel Hjelseth Høyer
Jevgeni Kiski
puddly
Bouwe Westerdijk
Klaas Schoute
Garrett
Anton Malko
Michael Chisholm
Joakim Plate
Aidan Timson
Glenn Waters
Michaël Arnauts
Christopher Bailey
Raman Gupta
Keilin Bickar
r01k
Jc2k
Robert Svensson
Willem-Jan van Rootselaar
muppet3000
Marvin Wichmann
Mick Vleeshouwer
Matrix
Pascal Vizeli
Olen
hahn-th
Mask3007
Duco Sebel
mkmer
G Johansson
Maciej Bieniek
Matthias Alphart
Gleb Sinyavskiy
Jesse Hills
mvn23
Felipe Martins Diel
Paarth Shah
TheJulianJES
Aarni Koskela
René Klomp
Ernst Klamer
Álvaro Fernández Rojas
cnico
Pascal Reeb
Vincent Giorgi
kingy444
Cougar
Ziv
On Freund
Ville Skyttä
Phil Bruckner
Hessel
StefanIacobLivisi
Robert Hillis
tstabrawa
Sebastian Muszynski
Tobias Sauerwein
Steven Looman
Tim Rightnour
Renat Sibgatulin
Dennis Schroer
Austin Brunkhorst
Poltorak Serguei