We previously used a value in the linux default ephemerial port range
which meant that if something else happened to use that port HomeKit
would not start up. We now use a value below 32768 to ensure that
the port is not randomly unavailable
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
If an entity changes between restart the iOS/controller
device may have cached the old chars for the accessory.
To force the iOS/controller to reload the chars, we
increment the config version when Home Assistant restarts
When we set up HomeKit, we asked users if they wanted
to create an entry in bridge or accessory mode.
This approach required the user to understand how HomeKit works and
choose which type to create.
When the user includes the media player or camera domains,
we exclude them from the bridge and create the additional entries
for each entity in accessory mode.
* Simplify homekit runs and service calls
Now that the homekit server is async, call_service
and run are running in the Home Assistant event loop
* remove comment
* remove another comment
HomeKit pairings and accessory ids from versions 0.109 and earlier are no longer
migrated on upgrade. Users upgrading directly to 2021.3 from 0.109
and older should upgrade to 2021.2 first if they wish to preserve
HomeKit configuration and avoid re-pairing the bridge.
This change does not affect upgrades from 0.110 and later.
* Fix homekit options not being prefilled
When changing homekit options, the existing ones
were not being prefilled on the form.
* hide camera screen if no cameras
Safe mode was added to work around a race condition where
the mdns announcment was sent too early and would cause
pairing to fail. Since this has been corrected in
HAP-python, there is no longer a need to have
safe mode.
Siri always requests auto mode even when the device does not
support auto which results in the thermostat failing to turn
on as success is assumed. We now determine the heat cool
target mode based on the current temp, target temp, and
supported modes to ensure the thermostat will reach the
requested target temp.
These workarounds inevitably ended up assuming the wrong thing
In issue #42444 they would assume it was still opening, and
in issue #41645 they would assume is was already closed.
The HomeKit spec does not permit the color temp characteristic
being exposed when color (hue, sat) is present. Since
Home Assistant will still send color temp values, we need to
convert them to hue, sat values for HomeKit
* Include the context_entity_id in the logbook api
context_entity_id is the first entity seen during
a time period that includes the context
* update test
* more of them
* include friendly name
* pylint wants a ternary
* Refactor
* performance
* fix homekit context
* Fix self describing events
* Fix external_events
* Add support for HomeKit doorbell
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* add speaker service for doorbells
* fixed test as doorbell char requires null value
* removed null value for doorbell presses. and removed broken override of default values
Co-authored-by: J. Nick Koston <nick@koston.org>
* Support multiple camera stream in HomeKit
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Revert "Update homeassistant/components/homekit/type_cameras.py"
This reverts commit d7624c5bff.
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update homeassistant/components/homekit/type_cameras.py
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* black
* bump pyhap
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
* Update type_cameras.py
* Apply suggestions from code review
Support both 24kHz and 16kHz sample rate
Co-authored-by: J. Nick Koston <nick@koston.org>
* Adjust formatting
* Reformat
Co-authored-by: J. Nick Koston <nick@koston.org>
* Switch homekit to use async_track_state_change_event
Calling async_track_state_change_event directly
is faster than async_track_state_change and has
slightly lower latency triggering state updates
in homekit
* check for deleted entities
* Update additional tests for linked sensor removals
* Ensure removing entities does not result in an exception
* Add humidifier support to homekit
* spell
* dependencies
* lint
* add linked humidity sensor for humidifiers
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* pylint
* Fix tests
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Update tests/components/homekit/test_homekit.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* Apply suggestions from code review
Co-authored-by: J. Nick Koston <nick@koston.org>
* apply suggestions from code review
* lint
* pylint
* push
* test for unavailable linker sensor
* black
* valid values key case
* black
* Update homeassistant/components/homekit/type_humidifiers.py
Co-authored-by: J. Nick Koston <nick@koston.org>
* black
* coverage
* Set current humidity to 0 if linked sensor removed or unavailable
* use last known humidity instead
Co-authored-by: J. Nick Koston <nick@koston.org>
* Added GLOB capability to entityfilter and every place that uses it. All existing tests are passing
* added tests for components affected by glob change
* fixed flake8 error
* mocking the correct listener
* mocking correct bus method in azure test
* tests passing in 3.7 and 3.8
* fixed formatting issue from rebase/conflict
* Checking against glob patterns in more performant way
* perf improvments and reverted unnecessarily adjusted tests
* added new benchmark test around filters
* no longer using get with default in entityfilter
* changed filter name and removed logbook from filter benchmark
* simplified benchmark tests from feedback
* fixed apache tests and returned include exclude schemas to normal
* fixed azure event hub tests to properly go through component logic
* fixed azure test and clean up for other tests
* renaming test files to match standard
* merged mqtt statestream test changes with base
* removed dependency on recorder filter schema from history
* fixed recorder tests after merge and a bunch of lint errors
* Remove zeroconf options from homekit
homekit uses the system shared zeroconf instance which
made the interface choice option controlled by the
zeroconf integration setting.
* change to cv.deprecated
* adj
* fix remaining tests from original merge conflict
* remove invalidation_version
* Fire events on homekit TV remote key press
* Changes from code review
* black
* isort
* flake8
* Update tests/components/homekit/test_type_media_players.py
Co-authored-by: J. Nick Koston <nick@koston.org>
Co-authored-by: J. Nick Koston <nick@koston.org>
Mick Vleeshouwer
J. Nick Koston
Franck Nijhof
Ville Skyttä
HomeAssistant Azure
tkdrob
Philip Allgaier
Paulus Schoutsen
Tomasz Pieczykolan
Lindsay Ward
springstan
Julius Mittenzwei
Niccolo Zapponi
Austin Drummond
Nick Whyte
Bram Kragten
Harryjholmes
Shulyaka
mdegat01