* Fire events for ISY994 control events
This allows hass to react directly to Insteon button presses (on switches and remotes), including presses, double-presses, and long holds
* Move change event subscription to after entity is added to hass
The event handler method requires `self.hass` to exist, which doesn't have a value until the async_added_to_hass method is called. Should eliminate a race condition.
* Overhaul binary sensors in ISY994 to be functional "out of the box"
We now smash all of the subnodes from the ISY994 in to one Hass binary_sensor, and automatically support both paradigms of state reporting that Insteon sensors can do. Sometimes a single node's state represents the sensor's state, other times two nodes are used and only "ON" events are sent from each. The logic between the two forunately do not conflict so we can support both without knowing which mode the device is in.
This also allows us to handle the heartbeat functionality that certain sensors have - we simply store the timestamp of the heartbeat as an attribute on the sensor device. It defaults to Unknown on bootup if and only if the device supports heartbeats, due to the presence of subnode 4.
* Parse the binary sensor device class from the ISY's device "type"
Now we automatically know which sensors are moisture, motion, and openings! (We also reverse the moisture sensor state, because Insteon reports ON for dry on the primary node.)
* Code review tweaks
The one material change here is that the event subscribers were moved to the `async_added_to_hass` method, as the handlers depend on things that only exist after the entity has been added.
* Handle cases where a sensor's state is unknown
When the ISY first boots up, if a battery-powered sensor has not reported in yet (due to heartbeat or a change in state), the state is unknown until it does.
* Clean up from code review
Fix coroutine await, remove unnecessary exception check, and return None when state is unknown
* Unknown value from PyISY is now -inf rather than -1
* Move heartbeat handling to a separate sensor
Now all heartbeat-compatible sensors will have a separate `binary_sensor` device that represents the battery state (on = dead)
* Add support for Unknown state, which is being added in next PyISY
PyISY will report unknown states as the number "-inf". This is implemented in the base ISY994 component, but subcomponents that override the `state` method needed some extra logic to handle it as well.
* Change a couple try blocks to explicit None checks
* Bump PyISY to 1.1.0, now that it has been published!
* Remove -inf checking from base component
The implementation of the -inf checking was improved in another branch which has been merged in to this branch already.
* Restrict negative-node and heartbeat support to known compatible types
Not all Insteon sensors use the same subnode IDs for the same things, so we need to use different logic depending on device type. Negative node and heartbeat support is now only used for leak sensors and open/close sensors.
* Use new style string formatting
* Add binary sensor detection for pre-5.x firmware
Meant to do this originally; writing documentation revealed that this requirement was missed!
* Updated to latest AbodePy version. Added services and events. Added new device types. Added exclude, light, and polling config options.
* Disable the event service if polling is enabled.
* Addressed all CR's
* Removed duplicated super call.
* Name config option now used. Removed deprecated DEFAULT_NAME.
* Modified partial to move event to first param.
* Updated abodepy version to 0.7.1
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Refactored to use AbodeDevice. Added Abode Lock device.
* Added push updates to abode devices.
* Upgraded to 0.7.2 after finding issue with callbacks.
* Bumped version to 0.8.2. Modified code to work with new constants and properties. Added cover and switch.
* Fixed hound violations.
* Updated to 0.8.3 to fix small bug with standby mode. Fixed comment in cover/abode.py.
* Fix lint issues
* Removed excessive logging. Moved device callback registration to async_added_to_hass. Moved abode controller from global into hass data.
* Removed explicit None from dict.get()
* Move device class into the constructor.
* Changed constant name to platforms.
* Changes as requested.
* Removing stray blank line.
* Added blank line of which I'm not sure how it was removed.
* Updated version to 0.9.0. Fixed motion sensor. Added power_switch_meter device type.
* Update abode.py
* fix lint
* Update pysesame requirement to 0.1.0 to support caching
* Set `available` property based on API enabled status
* Add state attributes for device ID and battery level
* Refactor zwave discovery to entity schema
* Address PR concerns
* Split DISCOVERY_SCHEMAS into separate file
* Only check cover reverse workaround once
* Make zwave devices listen on less network changes.
* Convert more platforms
* Remove printouts.
* Fix copy-paste
* Change default dependent list to empty list
* Create zwave devices on OZW thread and only add them during discovery.
* Read and write devices dict from loop thread.
* More async
* replace callback with coroutine
* import common function instead of callin git
* First round of not using values directly
* Round two
* lint
* Round four
* Conflict
* Round five
* Update zwave.py
* round six
* Docstring
* flakywakie
* Fetch values in constructor
* Blank line removal
* Set attributes in callback
* Docstring
* Round seven
* Ughgit add homeassistant/components/lock/zwave.py!
* Sloppy code
* Support for Nuki.io smart locks
* Update requirements and add lock.nuki to .coveragerc
* lint: Re-organize imports
* Schedule a state update instead of calling directly update_ha_state
* Remove update requests altogether
* Make sure there is no IO inside properties
* Fix: nuki lock are all initialized as "lock.unnamed_device"
* Update pynuki to 1.2 to avoid an extra REST API call for each lock init
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Update Command classes and device types to Sigma SDK
* Fix some pylint
* Seperate constants to file
* Flake8
* coverage and flake8 pylint
* Add services.yaml
* Service descriptions was missing
* Spelling :)
* grammar
* Remove zwave service descriptions from main
* Make sure values are updated regardles of manual or frontend update,
* Devices with set_switch command was not happy with fast updating.
* Binary triggersensors command was not happy with refreshed updating.
* Add power attribute to switch.
* Move device_state_attributes into base class.
* Fix imports following refactor.
* Bump pyvera version - should add contributed support for older (UI5) version dimmers and locks.
* Refactor device lookup to be based on vera classes, push category back into library.
* Add generic power attribute, fix inherited class order bug.
* Tidy.
* Replace switch with lock
* Update docstrings
* Add link to docs
* Add link to docs and update docstrings
* Update docstring
* Update docstrings and fix typos
* Add link to docs
* Add link to docs
* Add link to docs and update docstrings
* Fix link to docs and update docstrings
* Remove blank line
* Add link to docs
Greg Laabs
Alan Fischer
Fabian Affolter
Pascal Vizeli
Sergey Isachenko
William Scanlon
Michael Prokop
Mister Wil
Philipp Schmitt
Paulus Schoutsen
Per Sandström
Albert Lee
Adam Mills
John Arild Berentsen
Anubhaw Arya
Greg Dowling
Andrey
Erik
Erik Eriksson
Teagan Glenn
Tobie Booth
Robbie Trencheny
rhooper
Phil Kates
devdelay
Brad Johnson
Jan Harkes