* Update registries.py
Add concentration clusters recently added to zigpy
* Update measurement.py
Add concentration clusters recently added to ZigPy
* Update sensor.py
Add concentration clusters recently added to ZigPy
* Update sensor.py
remove unnecessary tabs
* Update measurement.py
remove unnecessary tabs
* Update sensor.py
Just adding CO and CO2 for now.
* Update registries.py
Just adding CO2 and CO for now.
* Update measurement.py
Just adding CO2 and CO for now
* Update sensor.py
import const CONCENTRATION_PARTS_PER_MILLION
* Update registries.py
removed trailing whitespace
* Update sensor.py
added extra blank lines and removed trailing whitespace
* Update measurement.py
added extra blank lines and removed trailing whitespace
* Update sensor.py
add device classes for CO and CO2
So far the Flo integration only supports shutoff valves. Add support for Flo leak detector pucks, which measure temperature and humidity in addition to providing leak alerts.
Since lacrosse.close() takes no arguments, but was directly added as a
listener to EVENT_HOMEASSISTANT_STOP, the following occured on shutdown:
Traceback (most recent call last):
File "/usr/lib/python/concurrent/futures/thread.py", line 57, in run
result = self.fn(*self.args, **self.kwargs)
TypeError: close() takes 1 positional argument but 2 were given
We previously used a value in the linux default ephemerial port range
which meant that if something else happened to use that port HomeKit
would not start up. We now use a value below 32768 to ensure that
the port is not randomly unavailable
* Use SwitchEntity instead of ToggleEntity and adjust test patches as recommended
* Move async_create_entry out of try block in config_flow
* Patch pypi package instead of HA code
* Bump pylitterbot to 2021.2.6, fix tests, and implement other code review suggestions
* Bump pylitterbot to 2021.2.8, remove sleep mode start/end time from vacuum, adjust and add sensors for sleep mode start/end time
* Move icon helper back to Litter-Robot component and isoformat times on time sensors
* Merge action and condition traces
* Update __init__.py
* Add typing to AutomationTrace
* Make trace_get prepare a new trace by default
* Correct typing of trace_cv
* Fix tests
* Added OPENING & CLOSING State Support
Added support for OPENING and CLOSING states using a combination of
the required V_ variables. Simplified the determination of the
cover's state by use of a new enumeration and single method allowing
the state to be used by all three HomeAssistant query methods.
* Fixes for HomeAssistant Style
Corrections to style to allow flake8, isort, and black to pass.
* Peer Review Changes
Added @unique to the main enumeration. Removed unnecessary parens from
door state logic. Reordered CLOSING and CLOSED in the enumeration.
* Improve restoring data and better handling when the restore data is empty
Improve readability of some logic related to POE clients
* There is no need to check clients_all in Switch platform
* Add better tests when restoring state
* Port except handling shouldn't be needed anymore
* Walrusify get_last_state
* Increase coverage of init
* Increase coverage of config_flow
* Improve coverage of controller
* Minor improvement to switch test
* Fix review comment
* Mock websocket class
* Replace the rest of the old websocket event tests
* Improve websocket fixture for cleaner tests
* Fix typing
* Improve connection state signalling based on Martins feedback
* Improve tests of reconnection_mechanisms based on Martins review comments
* Fix unload entry
* Fix isort issue after rebase
* Fix martins comment on not using caplog
* Fix wireless clients test
* Fix martins comments on wireless clients test
* Initial prototype of automation tracing
* Small fixes
* Lint
* Move trace helpers to its own file
* Improve trace for state and numeric_state conditions
* Tweaks + apply suggestions from code review
* Index traces by automation_id, trace while script is running
* Refactor condition tracing
* Improve WS API to get traces for single automation
* Add tests
* Fix imports
* Fix imports
* Address review comments
* Cap logging of loops
* Remove unused ContextVar action_config
* A platform is not a component
* Fix dynalite
* SUPPORTED_PLATFORMS --> PLATFORMS
* In tests
* In tests 2
* Fix SmartThings
* Fix ZHA test
* Fix Z-Wave
* Revert Z-Wave
* Use PLATFORMS const in ambient_station
* Fix ihc comment
* Add force update also to non-binary sensors as e.g. POWER Measurement agerage cannot be calculated otherwise. This is the same behavior as set with the obsolete tasmota detection
* add tests in binary_sensor and test_sensor for force_update flag
* satisfy flake8
* next try for force_update test but this time on the entity object which is the correct level
* once again satisfy flake8
* one more try for a test
* fix typo
* satisfy black
* Add init test to Freebox
* Review : more readable conftest
* Expect 2 blank lines between defs
* Review : Not I/O in the event loop
* Fix test_setup test
* remove useless const
* Review : mock setup methods
* Add service test
* Add import test
* Unused pylint suppression cleanups
* Remove outdated pylint bug references
* Add flake8-noqa config and note to run it every now and then
* Add codes to noqa's
* Unused noqa cleanups
* add addon_update service, use config flow to set up config entry, create disabled sensors
* move most of entity logic to common entity class, improve device info, get rid of config_flow user step
* fix setup logic
* additional refactor
* fix refactored logic
* fix config flow tests
* add test for addon_update service and get_addons_info
* add entry setup and unload test and fix update coordinator
* handle if entry setup calls unload
* return nothing for coordinator if entry is being reloaded because coordinator will get recreated anyway
* remove entry when HA instance is no longer hassio and add corresponding test
* handle adding and removing device registry entries
* better config entry reload logic
* fix comment
* bugfix
* fix flake error
* switch pass to return
* use repository attribute for model and fallback to url
* use custom 'system' source since hassio source is misleading
* Update homeassistant/components/hassio/entity.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* update remove addons function name
* Update homeassistant/components/hassio/__init__.py
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
* fix import
* pop coordinator after unload
* additional fixes
* always pass in sensor name when creating entity
* prefix one more function with async and fix tests
* use supervisor info for addons since list is already filtered on what's installed
* remove unused service
* update sensor names
* remove added handler function
* use walrus
* add OS device and sensors
* fix
* re-add addon_update service schema
* add more test coverage and exclude entities from tests
* check if instance is using hass OS in order to create OS entities
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
If an entity changes between restart the iOS/controller
device may have cached the old chars for the accessory.
To force the iOS/controller to reload the chars, we
increment the config version when Home Assistant restarts
* Handle stream failures in recorder
Fail gracefully with an error message when the recorder is invoked with no segments due to a stream failure.
* Update homeassistant/components/stream/recorder.py
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
* Improve handling for start of nest cam stream
Add negative_cts_offsets to segment container options in order to better handle recording at the start of a stream. Nest streams start off with a negative offset, and if the segment container does not support it, then it adjusts the timestamps making it out of order with the next segment as described in issue #46968
* Update homeassistant/components/stream/__init__.py
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>
Co-authored-by: uvjustin <46082645+uvjustin@users.noreply.github.com>