The default aiolifx timers are tuned for a network with few lost packets.
This means that lights can become "unavailable" from just a two second
dropout. An unavailable light is completely useless for HA until it is
rediscovered so this is an undesirable state to be in.
These tweaks make aiolifx try harder to get its messages through to the
bulbs, at the cost of some latency in detecting lights that actually are
unavailable.
* This change will enable the functionality for Arlo Q cameras. When we added the code to enable/disable motion detection, we assumed that base station will be present for all arlo type of cameras. But found recently that Arlo Q cameras does not have base station. So, removed the base_station dependency in the init code. Also added code in enable/disable motion detection code to first check if base station is detected by library. If base station is detected then it will use it to enable the motion detection. If not detected, even if service was called, it will not do anything. Enabling/disabling the motion detection for Arlo Q cameras have to added by someone who has that camera. I don't have the Arlo Q cameras.
* Fixed a typo in the code.
* Added support for temperature_offset and humidity_offset
Some DHT sensors require some offsets to work.
* Support for temperature and humidity offset
* Changed lines with 79 characters
* Moved const to dht.py from const.py
* Changed temperature_offset range
* Removed the const
const.py is at original state.
* Fixed continuation line under-indented
* Removed first round and added debug info
* Fix -1 value issue
Fixed issue where thermostat will sometimes return a current temperature or set temperature value of -1
* Update radiotherm.py
* Update radiotherm.py
* Update radiotherm.py
Added retry limit
* Update radiotherm.py
* Update radiotherm.py
* Refactored Amcrest to use central hub component
* Set default streaming source to snapshot
* Simplified code by using discovery platforms
* Makes lint happy
* Update authentication method to basic
* Fixed lint issues
* Makes Amcrest hub async
* Make Amcrest hub IO synchronous and disabled ffmpeg dependency on sensor/amcrest.
* Removed async to load component
* Organized import order
* Update amcrest.py
Prometheus (https://prometheus.io/) is an open source metric and alerting
system. This adds support for exporting some metrics to Prometheus, using
its Python client library.
bellows 0.3.0 changes the API to have both, renaming the attribute which used
to be for input clusters in the process.
This is in preparation for remotes.
* Allow notifications to include media, with Twitter as the first implementation. The Twitter notifier uses the Twitter-recommended async chunked media/upload approach and tries to convey the correct mime type of the media. Twitter implementation based on https://github.com/geduldig/TwitterAPI/blob/master/examples/upload_video.py.
* Changes based on balloob's review:
balloob: "Please remove this file. We fixed the issue in our tests that left this artifact."
balloob: "…prefer a guard clause"
balloob: "This is very inefficient. You are now generating up to 99 values."
balloob: "Since media_id is going to be None, why not just return None and you can remove the else."
* balloob: "Other notify platforms are using ATTR_DATA for it. That way if a platform requires extra metadata, we don't need to add extra fields. So please add it to Twitter via ATTR_DATA."
* New service `send_magic_packet` in new component `wake_on_lan`
* fix
* Unit tests for new component wake_on_lan
* Add wakeonlan to tests requirements
* remove wakeonlan from tests requirements and remake the component tests
* remove wakeonlan from tests requirements
* link domain and service names to component
* fix mocking in test_setup_component
* send_magic_packet as coroutine, better use of mock_calls in tests
* fix imports
* review changes
* better async calls
* Update test_wake_on_lan.py
This commit adds support for the set_operation_mode system call to the
generic thermostat component. This enables users to set whether the
thermostat is enabled or not by either setting it to auto or off.
* New component to connect to VELUX KLF 200 Interface
* Issue #8203: modifications as suggested by hound
* Issue #8203: added entries to .coveragerc
* moving velux/__init__p.y to velux.py
* Issue #8203: Using hass.data for storing global object, updated docstrings
* Issue #8203: validation of config, using standard approach for getting config values
* Issue #8203: Exception handling if connection to velux component fails
* Issue #8203: removed unused import
* Issue #8203: Some minor changes within docstrings
* Issue #8203: Some minor changes within docstrings
* Issue #8203: added dependency for pyvlx to requirements_all.txt
* Issue #8203: less broad exception
* Issue #8203: increased version
* Issue #8203: changed position of pyvlx within requirements_all.txt
* Issue #8203: bumped version of pyvlx to 0.1.3 (better handling of retries when token expires)
* reset pointer to home-assistant-polymer
* Issue #8203: modifications as suggested by fabaff
* hound *sigh*
* use upstream RachioPy, fix manual run switches
* Update requirements for PyPi version of rachiopy
* Use upstream RachioPy 0.1.2 (partial revert of 39c6484d89)
* Revert rachiopy downgrade
Paulus Schoutsen
Andrey
Daniel Perna
Abílio Costa
Daniel Høyer Iversen
Anders Melchiorsen
Open Home Automation
Fabian Affolter
Niccolò Maggioni
viswa-swami
Sean Dague
gitmopp
Vlad Korniev
Alan Fischer
Aliaksandr
Andrew
Marcelo Moreira de Mello
Russell Cloran
thecynic
Mike Christianson
Eugenio Panadero
Teemu R
Julius Mittenzwei
James Marsh
Adam Mills
Matthew Treinish
Oliver
Andy Castille
Charles Blonde