* Passing pep8, no tests yet
* Fixed some issues with the request throttling
* Removed ability to set throttle time because it was causing more issues than it was worth
* Added blink to .coveragerc
* Changed blinkpy version
* Removed global var, fixed per PR requests
* Added services for camera, migrated switch to binary_sensor
* Added schema for service, fixed naming, removed unused function
* Update to pylgtv 0.1.4
* Send icon with webostv notifications
Default to the homeassistant logo, but allow customizing it on the
component and for individual notifications
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* changed info to debug
* added frontier_silicon constant
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* added the frontier_silicon component
* trying to satisfy pylint
* fsapi version 0.0.6
* remove white space
* generated requirements
* added the frontier_silicon component
* cleaning up according to travis
* trying to satisfy pylint
* trying to satisfy pylint
* fsapi version 0.0.6
* with fsapi version 0.0.7
* added fsapi dependency
* yielding the FSAPI
* Removing white space from docstring
* Removing white space from an empty line
* Switching to sync
* clean up white spaces and rename device to FSAPIDevice
* trying to satisfy pylint
* changed info to debug
* added the frontier_silicon component
* fsapi version 0.0.6
* generated requirements
* pylint
* moved import requests to the method where it is being used
* add a basic unit test
* cleaned up source code
* added frontier_silicon constant
* added the frontier_silicon component
* added basic test
* added fsapi to requirements_all.txt
* added coverage omit, though a basic test was included
* added MEDIA_TYPE_MUSIC for artist and album
* removed duplicate cons
* switched fsapi call to a property, removed unecessary comment
* detailed docstring for fs_device
* added a space for the info_name - info_text separator
* reduced proeprty (fsapi) access for volume down/up
* Bump qnapstats library to 0.2.3
* Expose the new timeout setting
* Show persistent notification if QNAP fails to set up
This sitaution will usually occur if the server configuration is wrong or the
timeout is set too low. In both cases `api.update()` will fail, which is a
problem because we cannot initialize many of the sensors without having this
data.
* Add new system_temp condition to QNAP sensor
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connect to PLM and process simple protocol callbacks
* Baseline commit
* Connection working again
* Async add devices is working via callback now
* Beginning to interface with PLM library for control and state
* Deal with brightness in 255 levels with library
* Change sub names to match API changes
* Remove PLM-level update callback
* Support dimmable based on underlying PLM device attributes
* Expand to non-light platforms
* Stubs for turn on and off
* Current version of Python library
* Amend to use switch device attributes
* Use asyncio endpoints for control
* Add logging line
* Bump module version to 0.7.1
* Auto-load platforms, display device info/attributes
* Unify method name for getting a device attribute
* Require Current version of insteonplm module
* Import the component function in each platform in the balloob-recommend manner
* For consistency, handle switch state as onlevel just like lights
* Use level 0xff for on state, even with binary switches
Observing the behavior of a 2477S switch, it looks like even the non-dimmable
devices use 0x00 and 0xff for off/on respectively. I was using 0x01 for on
previously, but that yields unnecessary state change callbacks when message
traffic ends up flipping the onlevel from 0xff to 0x01 or 0x01 to 0xff.
* Use sensorstate attribute for sensor onoff
* Move new device callback to devices attribute
* Add support for platform override on a device
* Bump version of insteonplm module
* Default overrides is an empty list
* Avoid calling private methods when doing common attributes
* Remove unused CONF_DEBUG for now
* flake8 and pylint code cleanup
* Move get_component to local function where it is needed
* Update to include insteonplm module.
* New files for insteon_plm component
* Legitimate class doctring instead of stub
* Docstring changes.
* Style changes as requested by @SEJeff
* Changes requested by @pvizeli
* Add @callback decorator to callback functions
* Opportunistic platform loading triggered by qualifying device detection
Instead of loading all the constituent platforms that comprise the insteon_plm
component, instead we defer and wait until we receive a callback for a device
that requires the platform.
* Add support for the Open Energy Monitor Thermostat
* Fix linting errors
* Define an update method and local state
* fix linter
* Small tweaks.
Update oemthermostat version, default name and docstrings
* Fail to setup oem platform if connection fails.
* update requirements
* More tweaks to auth and exceptions
* Remove target temp
* Bump pwaqi to 1.4 to fix a typo in the underlying library.
* Update WAQI sensor to use pwaqi 2.0 which relies on AQICN public API.
This is a breaking change as the component now requires 'token' parameter.
* Fix lint
* new component telegram_webhooks
* keyboard support in telegram notify
* telegram_webhooks has no tests
* requirement like notify/telegram
* ops, requirements_all.txt needed for travis
* ops, requirements_all.txt is generated by script/gen_requirements_all.py
* check telegram trusted networks in web handler
* raise an event now
* use of hass.config.api.base_url
* more readable
* small cleanups
* Small style change for HA guideline
* fix lint
* revert return to origin
* Bumped up version to use 0.1.7 of Russound integration module.
Fixed bug arising from not supporting TURN_ON state (fixes issue https://github.com/home-assistant/home-assistant/issues/5012)
Implemented state support in 0.1.7 such that component state is returned from the actual AMP. (Still uses polling model though).
Tested it with home-assitant users @laf (original developer of the module) and @hofsta. Works fine with their Russounds.
* Made styling / compliance changes and updated correct version of russound module on requirements_all.txt.
* Changed handling of properties to be compliant with https://github.com/home-assistant/home-assistant/issues/4210
(Specifcailly added member variables for state, volume and source to cache these values, and introduced Update() method to set their values).
Now returns None if the selected source index that is returned from russound is greater than the length of the specified source list in the yaml config.
Removed unnecesary comment.
* Removed blank line after docstring.
* Removed updated() in class init and added True paramter to add_devices in setup_platform.
* Dropped the no longer needed self.update()
* Mailgun notify service
* Update dependency to version 1.3
- The provided credentials (including the domain) are now checked during
startup, as requested by @balloob
- The domain name is now optional
- There's a new config item "sandbox" which indicates whether to use the
sandboxed domain in case the domain is not set
* Fix a few lint issues
* Disable lint check no-value-for-parameter
The nest-cam changes have now been merged into the upstream library, so
there is no need to track a specific branch.
Updating to 3.1.0 also fixes a structure parsing bug I was experiencing.
* Add support for writing ID3 tags to the file for improved display in media players
* Lint and async fixes
* Use mutagen instead of taglib
* Fix tests
* Add fallback for album
* Requested changes
* move import
* Fix album name
* Change default options handling
* Move to member function / minor fix
* fix style
* fix lint
* change mutagen handling
* fix lint / add name to bytesio
* Update __init__.py
* Fix test, some cleanups
* Add mutagen exeption handling, fix tests
* fix mutagen taging
* Support for the Orage Livebox Play TV appliance
* Add liveboxplaytv to coveragerc
* Minor refactoring
* Update requirements
* Adjust comments
* Fix alignment
* Fix some coding-style issues highlighted by Travis CI
* The livebox play TV does not support playing media
* Lint: shorten line
* Remove unused callback function
* Remove redundant backslash
* Implement changes requested by balloob
* Don't error out if channel name or media url could not be retrieved
* Support current program (media title property)
* Remove unnecessary check
* Clean up: Remove another unnecessary check, _CONFIGURING variable and _playing attribute
* Update liveboxplaytv dependency to version 1.4.4
* Fix liveboxplaytv requirement
* Improve media state (support for playing and pause state)
* Update liveboxplaytv.py
* Support for Nuki.io smart locks
* Update requirements and add lock.nuki to .coveragerc
* lint: Re-organize imports
* Schedule a state update instead of calling directly update_ha_state
* Remove update requests altogether
* Make sure there is no IO inside properties
* Fix: nuki lock are all initialized as "lock.unnamed_device"
* Update pynuki to 1.2 to avoid an extra REST API call for each lock init
* Added door bell sensors
* Initial support for AC units.
* Added new device service
* Quirky Aros AC unit support
* Use super() everywhere and error checking for token request.
* Ignore camera sensors during setup of alarms.
* Added manufacturer/device attributes to all wink devices.
* Fixed style errors
* Fixed remaining lint errors.
* Initial sketches of rflink component.
* Add requirement.
* Properly load configuration.
* Bump rflink for graceful parse errors and protocol callback.
* Cleanup, documentation and linting.
* More documentation, first sensor implementation (temp & hum).
* Add brightness/dim support for newkaku protocol.
* Use separate class for dimmables.
* Make sure non-dimmable newkaku devices are turned on.
* Move some code around, add switches. Support loading from config.
* Fix bug in ignoring devices.
* Fix initial state assumption.
* Improve reliability on invalid conditions.
* Allow configuration of group for new devices.
* Sensor icons.
* Fix parsing negative numbers.
* Correct icon.
* Allow sending commands serial.
* Pluralize.
* Allow adding sensors from config.
* Fix ignoring devices and bugs in previous commit.
* Share know devices so devices from configuration don't get added as lights.
* Lookup unit from value_key.
* Remove debug.
* Start implementing event protocol in place of packet protocol.
- Added first test suite for sensors.
- This currently breaks light and switch.
* Refactor switch component to fit new rflink changes. Add test suite.
* Fix style.
* Refactor and test lights. Bring coverage to 100%.
* Use non-broken and production tested rflink module.
* Update requirements.
* Bump for logging.
* Improve readability.
* Do not use global variable but keep known device state in intended place.
* Improve docs.
* Make icon support generic.
* Disable overriding icons in config, as it belongs in customization. Only keep custom icon for entities that are able to detect a icon based on the thing they represent (sensors in this case).
* Implement configuration schema, overall refactor of magic values.
* Fix bug in config/test wait_for_ack.
* Small refactors.
* Move command logic into separate class.
* Convert command sending logic to class based pattern instead of using the event bus.
* Start not using bus for rflink event propagation to platforms.
* Do not use event bus for all entity types.
* Fire an event on the bus for every switch incoming rflink command.
* Resolve lint errors, remove some old code.
* Known devices no longer need to be registered separately.
* Log bus events.
* Event callback is a..... callback.
* Use full entity id for events.
* Move event sending to entity.
* Log incoming events.
* Make firing events optional inline with rfxtrx.
* Add foundation for signal repetition.
* Add signal repetition config and tests.
* Make plain switchable type explicitly configurable.
* Enable default entity settings for automatically added entities as well.
* Prevent default configuration leaking accross entities.
* Make sure device defaults don't get overwritten by defaults further down.
* Don't let fast state switching and repetitions turn your house into a disco.
* Make repetitions more responsive.
* Disable on/off fallback on dimmables as it currently doesn't play nice with repetitions.
* Use rflink that allows send_command_ack to be safely cancelled.
* Reduce duplication and make repeat work for non-ack.
* Implement reconnection logic.
* Improve reconnection logic.
* Also cancel repetitions when entity state is changed due to external command.
* Update requirements.
* Fix linting.
* Fix spelling.
* Don't lie.
* Fix lint.
* Support for automatically creating protocol translation (fixes spaces in device names).
* Returned support for dimmable and on/off entity.
* Duplicate code to fix linting issues with inheritance.
* Allow overriding unit of measurement from config.
* initial yeelight based on python-yeelight
* adapt yeelight's discovery code & suppress exceptions on set_default
* Support flash & code cleanups
Adds simple pulse for flashing, needs to be refined.
This commit also includes changing transition from seconds to milliseconds,
and cleans up the code quite a bit.
* cleanup code, adjust default transition to 350
* bump required version to 0.0.13
* Cleaning up and marking todos, ready to be reviewed
* Renamed back to yeelight.
* Removed effect support for now until we have some sane effects available.
* Add "breath" notification for flash, currently hidden behind a False check due to unknown issue not accepting it.
* TODO/open points are marked as such.
* Fix a typo in rgb calculation
* yeelight_<bulbtype>_<mac> for autodetected bulbs
hostname from mdns seems to vary
* Lint fixes, add music mode, fix flash
* Flash transforms now to red and back
* Fix lint warnings
* Add initial music mode.
* remove unused mode logging, move set_mode to turn_on
* Add save_on_change configuration variable
* yeelight: check if music mode is on before enabling it.
* Fix linting, bump required python-yeelight version
* More linting fixes, use import when needed instead of saving the module handle
* Use OR instead of + for features assignment
* Fix color temperature support, convert non-rgb values to rgb values in rgb()
* Fix typo on duration, thanks @qzapwy for noticing
* yeelight: fix issues from review, behave when not available
* Implement available()
* Fix transition to take seconds instead of milliseconds
* Fix default configuration for detected bulbs
* Cache values fetched in update()
* Add return values for methods
* yeelight: kwarg-given transition overrides config, slight cleanups
* change settings back to optional, request update when calling add_devices
* As future version of python-yeelight will wrap exceptions, we can handle broken connections more nicely.
* bump yeelight library version
* Remove unused import
* set the default only when settings are changed and not, e.g., when turned on by automation
* update comment & fix linting
* Remove SPEED_MED from fan
* Add an Amazon Polly TTS platform
* Update boto library version for notify.aws_* platforms to match the tts.amazon_polly req
* Improve log line and add docstring to function
* Simplify config logic
* Remove duplicate logic
* Don't know how this got in here...
* initial options work
* Remove stale config option and only allow supported languages
* Make requested changes
* Polly is only supported in some regions
* Allow filename to contain underscores (for amazon_polly platform name), remove unnecessary default_lang, other small things
* Add options dict to service description
* Add missing dependency in emulated_hue component.
On first startup after upgrade to 0.36, the emulated_hue componented failed to
start because the http component had installed the modules it depends on, in
this particular case 'aiohttp_cors' was missing.
* Include dependencies for the emulated_hue web server
Emulated_hue uses it's own 'web-server' component to handle hue related
discovery and config, so we need to make sure the required http modules are
made available before we are initialized.
We don't have to depend on the home-assistant http/api component because we do
not need to have the frontend to be initialized to handle emulated_hue, so we
can just import in the same set of requirements as the http component.
* Fix linting error
* Add support for Piglow
* Updated coverage and requirements
* Add support for Piglow
* Updated coverage and requirements
* Fix linting errors
* Fix linting errors
* Remove trailing whitespace
* Shorter lines
* Remove trailing whitespace
* Update piglow.py
* Pinned piglow version
* Remove unused method
* Remove unused imports
* Fix lint errors
* Update requirements all
* Updated Piglow to allow the component name to be changed
* Fix imports
* Pass in name
* The piglow platform now fails if it cannot detect the piglow device
* Tidy subprocess import
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* check cec message length when asking physical address (#38) (#38)
* cec turn on/turn off commands instead of power
* cec turn on/turn off commands instead of power
* Using new MaxShutterContact class
* Skip unnecessary function calls
* Added casting for VALUE
* Some renaming to clarify what's happening
* Bumped dependency version
* Bumped version in requirements
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
* incorporate remarks from users (#32)
* home-assistant-31 make mute schema better (#31)
* pycec-30 pyCEC version up (#30)
* pycec-30 pyCEC version up (#30)
* home-assistant-30 OSD display name from configuration (#30) (#33)
* Home assistant 29 (#34)
* home-assistant-29 counting from 0 (#29)
* Home assistant 31 (#35)
* home-assistant-31 add support for mute-on and mute-off (#31)
* home-assistant-31 pyCEC version up (#31)
* Home assistant 31 (#36)
* home-assistant-31 Limit OSD name to 13 chars (#31)
* home-assistant-31 Limit OSD name to 13 chars moved to CEC adapter (#31)
* home-assistant-31 version up (#31)
* home-assistant-31 formatting (#31)
* formatting
* service description
* service description
* single attribute for volume
* fixed mute on -> mute off
* moved config constant from core into component
* cec client object
* cec command structure
* autodetect source
* volume support and native source select
* switch device
* media player device
* detecting of state
* friendly names
* hdmi cec properties
* presence detection
* simplified callbacks
* stable names
* renamed methods
* code cleanup
* name with vendor
* fixed standby call name
* fake standby/poweron
* domain switch
* domain switch
* async updating
* update separated
* cec -> hass event bridge
* fixed name generation
* code cleanup
* code cleanup
* icon constants
* code cleanup
* do not register unavailable devices
* discovery of deevices
* code cleanup
* cec device discovery
* moved method implementation into child
* service descriptions
* service descriptions
* service descriptions
* changed entity init sequence
* logging cleanup
* add remove as job
* closing cec, no service schemas
* correct iterate over dictionary
* Volume by commands
* threading
* logging minimized
* get load out of main thread
* naming cleanup
* get load out of main thread
* optimized discovery
* async where possible
* cleanup logging, constructors first
* pydoc
* formatting
* no async_update from out of loop
no hiding entities
removed redundant device_state_attributes
async updating presence
* no async
* working async cec
* cec in thirdparty lib
* cec initialized oudsice
* working without SIGSEGV
* rollbacked file changed by mistake
* sending of commands
* working with ha
* using hass loop and device driven updates
* version up
* version up
* Command types in pycec, cleanup for HA integration
* Removed media player, state moved to switch
* service descriptions
* requirements: pyCEC
* line width to 79
* doc
* doc
* overindentation solved
* HDMI to uppercase
* minimal dependency on cec
* removed unwanted line
* doc wording
* margin 79
* line continuation indent
* imperative doc
* lint: indentation
* fixed overindented
* fixed overindented
* fixed overindented
* fixed overindented
* order of imports
* PEP8
* keep signature of overriding
* removed redundant blank line
* fixed update call method (#4)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* Dev (#6)
* reordered
* sending nonserialized data through hass.data
* code formatting
* code formatting
* import order
* Dev (#7)
* newer version of pyCEC
* updated services.yaml
* fixed lint scrpt to operate only on python files
* pycec version up
* update services
* no coverage report
* exclude non python files from lint
* lint only on python files
* reordered
* sending nonserialized data through hass.data
* import order
* fixed object handling
* code formatting
* Backwards compatibility of hdmi_cec (#10)
* services:
power_on
standby
active_source
* new version of pyCEC (#12)
* newer version of pyCEC
* devices config (#13)
* getting device name from config
* shutdown fix (#14)
* correct call on shutdown
* remove misplaced annotations (#15)
* Preparation for merge to upstream (#5)
* newer version of pyCEC
* updated services.yaml
* reordered
* sending nonserialized data through hass.data
* services:
power_on
standby
active_source
* code formatting
* getting device name from config
* correct call on shutdown
* pyCEC version 0.3.6 (#18)
* newer version of pyCEC
* updated services.yaml
* sending nonserialized data through hass.data
* services:
** power_on
** standby
** active_source
* getting device name from config
* correct call on shutdown
* fork new thread on multicore machines
* support both config schemas: original and new (#16)
* volume press and release support (#17)
* support for media_player (#21)
* accept hexadecimal format of commands
* support for media player
* platform customization
* type constants
* Dev (#23)
* accept hexadecimal format of commands
* support for media player
* platform customization
* TCP CEC support (#24)
* accept hexadecimal format of commands
* support for media player
* platform customization
* preparing tcp support
* volume handling (#25)
* Incorporated CR remarks (#26)
* cleanup imports
* cleanup and enhance services description
* removed unwanted file
* implemented CR remarks (#27)
* pyCEC v0.4.6
* pined dependency version
* tighten service schemas
* requirements (#28)
GE sell a range of Bluetooth dimmer switches based on Avi-on technology.
Add a module for controlling them. There's also a set of smart switches that
speak the same protocol, but I don't have any of those to test support with.
* Initial commit of anthemav platform. It loads but has no purpose.
* Now presents a card in the UI but the values aren't real
* Mute and volume polling/setting work now
* Source lists and selection works now.
* Reduce debug logging verbosity
* Support power on/off and skip polling for details if power is off
* Add some static tables to decode numerics from telnet commands
* Add stub for unsupported media_play
* New style anthemav uses native asyncio structure
* Add device callback for asyncio
* This is ugly but it works
* Simplify async setup and abstract class data retrieval
* Implement commands (power on and power off for now)
* Add support for scan_interval and set default to 120 seconds
* Pass-through to package handlers for volume and input selection
* Slight restructuring to satisfy anthemav 0.9
* Load anthemav package from pypi now that it's registered
* Proper app_name from a/v info
* Mispelled word
* media_player/anthemav initial commit of platform requirements
* Philio 3-in-1 Gen 4 zwave sensor needs the no-off-event workaround. (#5120)
* Add print_config_parameter service to Z-Wave (#5121)
* Add print_config_param service to z-wave
* Add print_config_parameter service to z-wave
* Add print_config_parameter service to z-wave
* Fix typos
* Fix typos
* Fix typo
* Conform to Python/project style requirements
* Making pylint happy
* Bring pip requirements in agreement with the code
* Bungled previous update
* Remove unnecessady SCAN_INTERVAL logic
I was unawre that this is performed as part of the normal platform behavior and
it's unnecessary for a platform to independently implement this logic.
* Refactor code based on @armills PR requests
* Re-add media_play stub to avoid traceback
* Align with platform reqirements
* Remove references to SCAN_INTERVAL and clean up _lookup logic
* Add DEFAULT_PORT assignment
* Code style changes and removal of vestigial structures
* CONF_NAME handling changes to allow local override to default from device
* Address PR feedback from @balloob
* Remove media_play function override
It's no longer necesary for the platform to implement a stub media_play
function override now that the Add SUPPORT_PLAY flag #5181 issue has been
resolved and merged into the dev branch.
* Rename callback function to async_ for clarity
* Use async routines for platform methods
* Convert update callback to coroutine for conformity
Underlying anthemav library now properly supports coroutine callbacks instead
of normal functions. Converted the platform callback to a coroutine for
conformance with async operation for the device.
Special thanks to @pvizeli and @armills for their invaluable remedial Python
instruction!
* Further callback refinements
Altered the nature of callback handling based on suggestions from @pvizeli
* True not needed for local push update_ha_state
* Small style fix
* denonavr: Expose input as title when in non playing modes
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denon: Pop from the intended end of the list
Pop from front of list, so we start with NSE0, then NSE1X and so on.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Don't provide broken media_url's
Only return a media_url if we're in a state that might provide one.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* denonavr: Only expose player support when in a player mode
This changes so the denonavr only exposes the media player support, when
in a mode that supports media playing.
Signed-off-by: Anton Lundin <glance@acc.umu.se>
* Initial commit of discord notification component
* Fixed error where script added extra entries to .coveragerc
* Cleaned up code
* Compliance to PEP8
* removed dependencies
* readded dependencies
* changed name of client id to token for configuration
* Changes for Hound
* Incorporated Review Feedback
* Review feedback
* Updated requirements file
* Check compliance
* Introduced Amcrest camera sensors
* Makes script/gen_requirements_all.py happy
* Bump Amcrest version across all components
* - Adjusted scan_interval to 10 seconds
- Filtering HTTPError and ConnectTimeout exceptions
- Removed @Throttle decorator
* Add support for Zengge Bluetooth bulbs
Adds support for the Zengge Bluetooth RGBW bulbs. These are sold under a
number of brands, including Flux. The bulbs do not support full RGBW
control - they turn off the RGB LEDs when white is enabled, and vice versa.
* Update zengge.py
* Initial commit for Wink fan support
* Added fan to discovery list
* Raise NotImplementedError and fixed is_on
* Added speed property
* Update __init__.py
* eq3btsmart: support modes and clean up the code to use climatedevice's features
* eq3btsmart: re-add device state attributes
adds reporting for is_locked, valve, window_open and low_battery,
exposing everything the device reports currently.
* eq3btsmart: bump version req
* eq3btsmart: fix a typo in mode name, report unknown when not initialized
* eq3btsmart: depend on newly forked python-eq3bt lib, pythonify states
* platform set-up begin components
* lights seem to be getting set up properly, not sure why they aren't being added...
* typo
* Dependencies line
* toggle working
* toggle working
* added the switch to insteon_local
First commit hope to test tonight or in the morning
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* Update insteon_local.py
* move dependency declaration before import?
* Move dependencies in Switch
* Update insteon_local.py
* wait for response
* switched the while to an if
switched the while 'cmd2' not in resp: to an if 'cmd2' not in resp: this seems to have the updater working
* Switched the while sleep loop to an if
switched the wile cmd2 not ins resp to be if cmd2 not in resp seems to be working.
* Update insteon_local.py
* import statement
Updated the import statement to import the instance of the insteon_local component not the hub Instance.
* updated import and the device assignment
update the import to import the instance of the insteon_local component not the hub.
* more changes to support the import change
* more changes to support the import change
* change to hass.data and add loop logic
* &&
* Update insteon_local.py
* Update insteon_local.py
* logic fixes and throttle
* reduce polling time
* brightness support
* import util
* hound fixes
* requirements file
* more hound fixes
* newline
* newline weirdness
* lint fixes
* more lint fixes
* switch state
* Update insteon_local.py
* log cmd2 for debugging
* assume success
* remove check for none
* fix comments
* fix comments again
* fix comments, add fixed version of lib, add support for timeout, add support for port, handle invalid login and connection problems
* fix logging exception
* fix hounceci-bot errors
* fix hounceci-bot errors
* requirements fix
* unique-id changes
* make dimmer off use saved ramp rate
* configurator working for lights
* configurator working for switches?
* configurator working for switches?
* include model names and fix lint errors
* lint fix
* fix exception order
* lint fixes
* fix lint errors
* update to use insteon local 0.38
* fix device id
* move status check to library
* move status check to library
* add SKU to setup
* lint fixes
* requirements
* linting
* Add support for Tikteck Bluetooth bulbs
Adds support for the Tikteck RGBW BLE bulbs. These don't provide "true" RGBW
support - at a certain point in RGB space, the white LEDs turn on. Each bulb
has a specific key that needs to be extracted from the Android app.
* Update tikteck.py
* Update nx584 requirement to 0.4
There have been a few bug fixes to nx584 since 0.2, so this just updates
our requirement to pull in the newer version.
* Fix nx584 if no partitions are found
If we succeed in our connection to the panel but find no
configured partitions, then we will fall through to the bypass
probe and fail because 'zones' is never initialized. This fixes
both exception paths and adds a test that would poke it.
* Add sensor for International Space Station
* Change two sensors to one with attributes.
* Fix due to comments in HA PR. Thanks !
* Update Requirement
* Updated Nest API to have logical names
* Fix NoneType not having replace method in NestSensor constructor
* Move name setting to constructor, in case zone.name causes IO.
* normalize is_online to online
* Updated python-nest API
* push is_* helpers down to python-nest, and use inheritence to implement rather than checking class name
* Update python-nest
* Updates TP-Link switches dependent module
Refactors code to use the new module API
* Set TP-Link Switch name from the device settings
If no name has been set in the configuration file the name set on the device will be used
* Removes default name for TP-Link switch
Fallback to device alias now works properly
* Removes logging
* Updates comment to denote support for HS200 switch
* Added Volume Set option and autodiscovery functions to Denon AVR receivers
* Corrected issues in SSDP discovery and in case no host could be discovered
* Corrected discovery handling / added denonavr to discovery platform
* No needless discoveries anymore / add_devices() with list instead of loop
* TTS Component / Google speech platform
* Change file backend handling / cache
* Use mimetype / rename Provider function / allow cache on service call
* Add a memcache for faster response
* Add demo platform
* First version of unittest
* Address comments
* improve error handling / address comments
* Add google unittest & check http response code
* Change url param handling
* add test for other language
* Change hash to sha256 for same hash on every os/hardware
* add unittest for receive demo data
* add test for error cases
* Test case load from file to mem over aiohttp server
* Use cache SpeechManager level, address other comments
* Add service for clear cache
* Update service.yaml
* add support for spliting google message
* Add media position support and trailer type to Emby
* Adjustments to mitigate TypeError
* Simplify media_position property
* Update handling when data isn't available
* Update emby.py
- Implemented support for covers and dimmable lights.
- Removed global object, use hass.data.
- Disabled polling via update.
- Inherit from common TelldusLiveEntity device.
- Configurable polling interval
- Use https API endpoint
- Use tellduslive package
* Bump python-nest to fix issue with Nest Cam without activity zones
* bump to include fix python-nest dependency with hvac_state
* regenerate requirements_all.txt
* Updated python-nest dependency
This sha fixes two issues:
- min and max temperatures not being set when temperature isn't locked
- fixes error when setting farenheit with a .5
* gen requirements all
* Add fix for https://github.com/home-assistant/home-assistant/issues/4731
* change unifi dependency to pyunifi
* Change dependency to fix#4336
* Run gen_requirements_all.py script
* Changed import statement to reflect new package
* Updated test_unifiy.py with different module
* Update requirements_all.txt
* Add support for Netatmo Welcome Tags
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add size parameter for WelcomeData
* minor fixes
* Add Throttling mechanism for update event
This will prevent to reach the API limit
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Change scan interval for Netatmo Binary sensors
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Minor fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update netatmo.py
* Added component for flic smart buttons.
* Apply home-assistant coding styles.
* Fixed flic configuration.
* Made logging for scanning for new buttons less verbose.
* Fixed flic event data.
* Follow async conventions.
* Added new requirements to requirements_all.txt.
* Added flic component to .coveragerc
* Updated flic threshold configuration key names.
* Flic devices are now removed when they disconnect.
* Include review feedback.
* Fixed stopping of clients in flic component when home assistant is stopped.
* Updated flic component by integrating input of #4738.
Use library method to determine click type. Merge three click events into single one with click_type parameter.
* Use a single client for both handling click events and scanning for new buttons.
* Renamed flic ‘auto_scan’ configuration variable to ‘discovery’ using HA constants.
* initial commit
Previous work included with no history. Sorry, I was figuring out how to use git, branches and deal with open source projects. At this point this is a working switch but with the shortcomings of each of the 8 ports causes a network query. This needs to be rewritten so that the SwitchDevice is part of a larger device group that is only queried once, saving traffic and preventing the small device from timing out.
* Device polls independent of switches now
Used anel_pwrctrl.py as a basis to extract the per-switch polling out to per-device so it can be trottled properly. Likewise, no longer touching the device independently for relay status AND relay name. Getting them both from the same statuslist() return.
* Final comments and tweaks
Lowered cycle and update time since the device update is working so well now. Effectively no timeouts anymore.
* Added dlipower to requirements
homeassistant.components.switch.digitalloggers
* Tox fixes
pydocstyle updates
* More tox errors
* Yet more tox
Removed useful future TODO and helpful details on the structure of the statuslocal list.
Good catch on not initializing .update(), though it worked.
* Blank line fix
* Added file to .coveragerc
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* Initial Harmony device support, working current activity sensor and switch for each activity
TODO: add new device per hub to send device specific activity
Changes to be committed:
new file: homeassistant/components/harmony.py
new file: homeassistant/components/sensor/harmony.py
new file: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* ready for beta, I think
Changes to be committed:
modified: homeassistant/components/harmony.py
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
* Changes to be committed:
modified: homeassistant/components/harmony.py
new file: homeassistant/components/remote/__init__.py
new file: homeassistant/components/remote/harmony.py
new file: homeassistant/components/remote/services.yaml
modified: homeassistant/components/sensor/harmony.py
modified: homeassistant/components/switch/harmony.py
Implemented remote component and harmony platform
* streamlined harmony support
* typo
* reworked token generation
* delete
* readded after rebase
* cleaning up style errors
* modified .coveragerc
* moved import statements
* added more debug logging
* Added URL encoding of token received from Logitech
* Corrected import for python 3
* new pyharmony version
* new pyharmony version
* remote tests
* only write config file if not present or sync service is called
* more tests
* more tests
* bumped pyharmony version to work with new auth
* bumped pyharmony version to work with new auth
* style corrections
* harmony local auth and remote demo platform
* style fix
* PR refinements and permission issues
* forgot a blank line
* removed sync test from test_init
* removed sync test from test_init
* visual indent
* send_command test in demo platform
* Introduced support to Amcrest IP Cameras
* Fixed lint issues
* Fixed requirements test
* * Implemented test to verify crendentials during camera setup
* Added persistent_notification in case of error when during Amcrest setup
* Homematic update with HomematicIP/HomematicWired support and multible connections
* fix bug in virtualkey service
* create new service & cleanups
* fix lint
* Pump pyhomematic 0.1.18
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Initial implementation of DuneHD media player component based on pdunehd.
* Major: avoid update() in property fetch,
Major: implement source support,
Major: single device per media player instance,
Major: support for volume / mute controls
* Pythonify pdunehd.
Support media_title.
* Fix pylint.
* Further pylint.
* docstring
* Formatting and indentation.
* Change indentation to spaces.
* Update coverage and recorded requirements before PR.
* Further pylint / fake8 / pydocstyle fixes.
* Implement next / prev track,
Properly decode blu-ray playback,
Attempt to decode media title
* Fix play / pause
Linting
* Update requirements.
Fix lint.
* Fix lint and syntax error
* Yet more linting.
* Yet more linting.
* Fix lint: line too long.
* Force update of HA state.
* start nestcam support
* start nestcam support
* introduce a access_token_cache_file
* Bare minimum to get nest thermostat loading
* occaisonally the image works
* switch to nest-aware interval for testing
* Add Nest Aware awareness
* remove duplicate error logging line
* Fix nest protect support
* address baloobot
* fix copy pasta
* fix more baloobot
* last baloobot thing for now?
* Use streaming status to determine online or not. online from nest means its on the network
* Fix temperature scale for climate
* Add support for eco mode
* Fix auto mode for nest climate
* update update current_operation and set_operation mode to use constant when possible. try to get setting something working
* remove stale comment
* unused-argument already disabled globally
* Add eco to the end, instead of after off
* Simplify conditional when the hass mode is the same as the nest one
* away_temperature became eco_temperature, and works with eco mode
* Update min/max temp based on locked temperature
* Forgot to set locked stuff during construction
* Cache image instead of throttling (which returns none), respect NestAware subscription
* Fix _time_between_snapshots before the first update
* WIP pin authorization
* Add some more logging
* Working configurator, woo. Fix some hound errors
* Updated pin workflow
* Deprecate more sensors
* Don't update during access of name
* Don't update during access of name
* Add camera brand
* Fix up some syntastic errors
* Fix ups ome hound errors
* Maybe fix some more?
* Move snapshot simulator url checking down into python-nest
* Rename _ready_to_update_camera_image to _ready_for_snapshot
* More fixes
* Set the next time a snapshot can be taken when one is taken to simplify logic
* Add a FIXME about update not getting called
* Call update during constructor, so values get set at least once
* Fix up names
* Remove todo about eco, since that's pretty nest
* thanks hound
* Fix temperature being off for farenheight.
* Fix some lint errors, which includes using a git version of python-nest with updated code
* generate requirements_all.py
* fix pylint
* Update nestcam before adding
* Fix polling of NestCamera
* Lint
* Initial implemenation of DSMR component.
* Fix linting
* Remove protocol V2.2 support until merged upstream.
* Generate requirements using script.
* Use updated dsmr-parser with protocol 2.2 support.
* Add tests.
* Isort and input validation.
* Add entities for gas and actual meter reading. Error handling. Use Throttle.
* Implement non-blocking serial reader.
* Improve logging.
* Merge entities into one, add icons, fix tests for asyncio.
* Add error logging for serial reader.
* Refactoring and documentation.
- refactor asyncio reader task to make sure it stops with HA
- document general principle of this component
- refactor entity reading to be more clear
- remove cruft from split entity implementation
* Use `port` configuration key.
* DSMR V2.2 seems to conflict in explaining which tariff is high and low.
http://www.netbeheernederland.nl/themas/hotspot/hotspot-documenten/?dossierid=11010056&title=Slimme%20meter&onderdeel=Documenten
> DSMR v2.2 Final P1
>> 6.1: table vs table note
Meter Reading electricity delivered to client normal tariff) in 0,01 kWh - 1-0:1.8.1.255
Meter Reading electricity delivered to client (low tariff) in 0,01 kWh - 1-0:1.8.2.255
Note: Tariff code 1 is used for low tariff and tariff code 2 is used for normal tariff.
* Refactor to use asyncio.Protocol instead of loop+queue.
* Fix requirements
* Close transport when HA stops.
* Cleanup.
* Include as dependency for testing (until merged upstream.)
* Fix style.
* Update setup.cfg
* Implement WAQI sensor
* Corrections based on CI check.
* Updated requirements_all.txt for pwaqi==1.2
* Require latest version of pwaqi
* Fix lint: single argument for .exception and no more pass statement.
* Further lint fixes.
* pydocstyle fix
* Implement rate throttle.
Data on WAQI is usually updated once an hour - make it refresh every thirty minutes.
* Implement schema validation with voluptuous.
Change exception handling scope.
Move messages to debug().
* Fix lint (empty indented line).
* Sort lines correctly.
* Fix last lint issue.
* Provide additional sensor data as received from WAQI.
Easier-to-read throttle timing.
* Additional object attributes to be unrolled later.
* used MindrustUK's version ( https://github.com/MindrustUK/python-lightify/commits/master/osramlightify.py ) from Oct 2, 2016 and changed the REQUIRMENTS line to use the fixed lightify component with thread safety fixes
* reformatted long lines
* updated osramlightify requirements in requirements_all.txt
* ran script gen_requirements_all.py
* rerun requirements gen script on linux
* fixed some inspection warnings
* zip file points to a specific commit
* no requests to lights in properties, instead instance variables are update in update method
* regenerated requirements_all.txt
* removed call to update from is_on() property
pyvera 0.2.21 fixes the fact that use of requests.get was not using a
timeout. Some times (after a few days of use) the pyvera poll loop
would hang indefinitely on a requests.get of the event interface. This
would cause the pyvera thread to hang completely. It would also
prevent graceful shutdown, as pyvera does a thread join.
The new version uses a timeout, so that we won't lock up any more.
* Add keypress & output control services to Envisalink component
Add services to allow sending custom keypresses and activating
programmable outputs on an alarm control panel.
Implemented for the Envisalink alarm, and moving to new version of
pyenvisalink to support this.
Replicated the service handler mapping code from Cover component into
Alarm Control Panel to allow handling alternative schemas if required
by new services.
* Update requirements_all.txt
* Updated services.yaml
* Removed requirement to enter code in HA UI
Incorporated changes suggested by @sriram
https://github.com/srirams/home-assistant/commit/2f8deb70cb5f3621a69b6b9
acb72f8e29123650c
Including pending state for exit/entry delay
Clarified services to use the code passed to them as a first priority,
otherwise use the code from configuration
Swapped back to using NotImplementedError for the service definitions
* - Add support for alarm_keypress to manual alarm (functions like a standard alarm keypad where entering the code disarms or arms the alarm)
- Add tests for alarm_keypress to manual alarm
- Style corrections (too many returns, comment & whitespace issues)
* Removed alarm_output_control service as unable to incorporate in the demo/test in a meaningful way
* Add keypress & output control services to Envisalink component
Add services to allow sending custom keypresses and activating
programmable outputs on an alarm control panel.
Implemented for the Envisalink alarm, and moving to new version of
pyenvisalink to support this.
Replicated the service handler mapping code from Cover component into
Alarm Control Panel to allow handling alternative schemas if required
by new services.
* Update requirements_all.txt
* Updated services.yaml
* Removed requirement to enter code in HA UI
Incorporated changes suggested by @sriram
https://github.com/srirams/home-assistant/commit/2f8deb70cb5f3621a69b6b9
acb72f8e29123650c
Including pending state for exit/entry delay
Clarified services to use the code passed to them as a first priority,
otherwise use the code from configuration
Swapped back to using NotImplementedError for the service definitions
* - Add support for alarm_keypress to manual alarm (functions like a standard alarm keypad where entering the code disarms or arms the alarm)
- Add tests for alarm_keypress to manual alarm
- Style corrections (too many returns, comment & whitespace issues)
* Removed alarm_output_control service as unable to incorporate in the demo/test in a meaningful way
* Moved the Alarm_Keypress service into Envisalink component out of the generic
* Update envisalink.py
* Update services.yaml
This makes it so that media playback support for inputs is dynamically
fetched from the receiver, instead of assuming that all playback
commands work for all inputs.
Tests are added for this, using a FakeYamaha class, which has some
sample data stubbed in for key methods that need to be called. We also
include an example of the desc.xml needed to dynamically parse these
features for these tests (as this is done in platform init).
* Fix "argument of type 'NoneType' is not iterable" during discovery
When yamaha receivers are dynamically discovered, there config is
empty, which means that we need to set zone_ignore to [] otherwise the
iteration over receivers fails.
* Bump rxv library version to fix play_status bug
rxv version 0.3 will issue the play_status command even for sources
that don't support it, causing stack traces during updates when
receivers are on HDMI inputs.
This was fixed in rxv 0.3.1. Bump to fix bug #4226.
* Don't discovery receivers that we've already configured
The discovery component doesn't know anything about already configured
receivers. This means that specifying a receiver manually will make it
show up twice if you have the discovery component enabled.
This puts a platform specific work around here that ensures that if
the media_player is found, we ignore the discovery system.
* Added Synology DSM Sensor
* Fixed balloobbot's comments
* Fixed mistake (should have run lint and flake8 before committing
* Fixed update mechanisme according to balloobs feedback
* Requesting retest as test failure isn't related to changes made
* Added support for Philips Tvs with JointSpace API
* Flake + Lint fixes
* Lint be like "lol fu"
* Changes as requested by reviewers, except lib-requirement
* Switched to library-usage
* lint... newline-bingo...
* Initial submission of LiteJet integration.
* Add LiteJet switch pressed automation trigger. (State changes are too slow to catch a press-release.)
Add LiteJet scene, replacing commented out code that treated these as lights.
Include LiteJet numbers in the device state so that it is easy to lookup entity -> number.
* Fix missing global.
* Allow light's brightness to be set explicitly.
* Support optional 'ignore' key to ignore prefixes of loads, switches, and scenes that weren't configured for use in the LiteJet system.
* Fix lint errors and warnings.
* Cleanup header comments.
Default to not creating LiteJet switches as these are generally not useful.
* Lint fixes.
* Fixes from pull request feedback.
* Use hass.data instead of globals for data storage.
* Fix lint warnings.
* Sonos responsiveness improvements (async_ coroutines, event based updating, album art caching) + Better radio station information
* Docstring fixes.
* Docstring fixes.
* Updated SoCo dependency + fixed file permissions.
* Only fetch speaker info if needed.
* PEP8 fixes
* Fixed SoCoMock.get_speaker_info to get test to pass.
* Regenerated requirements_all.txt + async fetching of album art with caching + added http_session to HomeAssistant object.
* Unit test fixed.
* Add blank line as per flake8
* Fixed media image proxy unit test.
* Removed async stuff.
* Removed last remnants of async stuff.
* Add Emby Server media_player component
* Code cleanup, move to request sessions, generate UUID per session
* Make media image fetch more robust
* Allow for http or https
* Cleanup some Keyerror conditions found through more testing
* Move EmbyRemote to pip, update requirements
* Code cleanup, add SSL config option
* Added a ThingSpeak component
* Forgot a colon. Fixed it
* Some config variables are better required
* New requirements created by the script
* Updated the .coveragerc
* Fixed small linting errors
* Removed unneccessary validation
* Even more linting error fixes
* Changed the way the component listens to state changes
* Removed unneccessary declaration of 'state' variable, referring to new_state instead
This uses the discovery code from netdisco/ha to discover yamaha
receivers. The old discovery code remains if discovery is turned of in
HA, at least for now. Though it probably is worth turning that off in
the future.
This commit adds a new component for communicating with mochad[1] a
socket interface for the CM15A and CM19A USB X10 controllers. This
commit leverages the pymochad library to interface with a mochad socket
either on a local or remote machine. Mochad is added as as a generic
platform because it supports multiple different classes of device,
however in this patch only the switch device implemented as a starting
point. Future patches will include other devices types. (although
that's dependent on someone gaining access to those)
[1] https://sourceforge.net/projects/mochad/
* Initial commit of the iOS component and platform
* Allow extra
* Add battery to identify, a new function to get devices, and load the upcoming sensor
* Add iOS sensor platform, currently for battery state & level
* Add discoverability for the iOS app
* Convert single quote to double quotes
* Load all required components and platforms when loading the iOS component for the best experience
* Unify quote style to double
* Change to hass_ios
* Update push URL, add support for logging based on status code, log rate limit updates
* Block iOS from coverage checks for now...
* Adds energy monitoring capabilities to the TP-Link HS110
Energy monitoring works only on the HS110 model
* Reverts to using GadgetReactor's module
* Updates requirements_all.txt
* Refactors tplink switch to use attribute caching
* Update tplink.py
* Add Bbox Routeur bandwidth as sensors
Add possibility to monitor max and currently used bandwidth of your xdsl connection for Bbox Routeur
* Minor Fixes
Unit constant get back into the main sensor file
* Unused round removed
* Add support for Neato Connected robot as a switch
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add checklist items
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add missing docstring
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* [Neato] Add update function to retrieve robot state
* Add docstring for update function + catch exception when retrieving state
* Change type of HTTPError when updating state
* Fix pylint errors
Changelog: https://github.com/SoCo/SoCo/releases/tag/v0.12
Backwards Compatability changes:
Dropped support for Python 3.2
Methods relating to the music library (get_artists, get_album_artists, get_albums and others) have been moved to the music_library module. Instead of device.get_album_artists(), please now use device.music_library.get_album_artists() etc. Old code will continue to work for the moment, but will raise deprecation warnings
Made a hard deprecation of the Spotify plugin since the API it relied on has been deprecated and it therefore no longer worked
Dropped pylint checks for Python 2.6
* Enhance yamaha component
This enhances the yamaha component to create 1 player per zone,
instead of only one play, which provides direct control of the various
zones for the player.
It also exposes play_media for NET_RADIO sources, which allows direct
setting of that.
This requires code changes in rxv 0.2.0, so the requirement dependency
is raised.
* Support current playback metadata for NET_RADIO
When on NET RADIO, support the currently playing information.
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* added push notification implementation
* some lint changes
* added docs
* added push notification implementation
* some lint changes
* added docs
* Fixed comment formatting issues
* Added requirments
* Update requirements_all.txt
* Update apns.py
* re-generated requirments_all.txt
* Added link to online docs
* changed to use http/2 library for push notifications
* fixed lint issue
* fixed test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* another go at fixing test that fails on CI
* added missing docstring
* moved service description to main services.yaml file
* renamed apns service
* Added additional checks which hides functions which are not support (like fans / humidity / cooling)
* Fixed pylint and flake8 errors (not test file available)
* Fixed pydocstyle error
* Refactored Code and Comments as described in pull-request
* Added additional comment and requesting retest
* Upgraded to python-nest 2.11 which contains previously hidden functions
* Add discovery support for Netatmo Weather station
Only The weather information are currently supported (No battery or wifi status supported)
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Add unique_id for netatmo sensors to avoid duplicate
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Update requirements_all.txt and PEP8 fixes
Signed-off-by: Hugo D. (jabesq) <jabesq@gmail.com>
* Rename Forecast.io platform to Dark Sky
* Upgrade to python-forecastio to 1.3.5
* Update to reflect name change (Forecast.io -> Dark Sky)
* Rename forecast to darksky
* Add new component for licence plates processing (OpenAlpr)
* address balloobbot comments
* add to coveragerc
* move config from device to base
* fix lint
* move local api test to voluptous
* split render engine
* change cloud_api pip string & lint
* update requirements_all.txt
* fix lint
* update cloud_api url
* convert base64 byte string to string
* Update cloudapi / add configence / add state
* fix lint
* change state to high confidence plate
* fix cloudapi
* fix local api detection
* add wraper for local api
* fix lint
* fix wrong import
* fix HAAlpr name
* update ha-alpr without async
* support only eventbased requests with interval 0
* fix minor things
* fix lint
* fix lint2
Fabian Affolter
Dale Higgs
Erik
Kevin Fronczak
Adam Mills
William Scanlon
Paulus Schoutsen
Pascal Vizeli
Caleb
Craig J. Ward
Robbie Trencheny
pvizeli
ArrayLabs
Kevin Siml
Josh Anderson
Barry Williams
Markus Peter
Thibault Cohen
Marcelo Moreira de Mello
Daniel Høyer Iversen
John Mihalic
Valentin Alexeev
happyleavesaoc
Micha LaQua
Jan Losinski
Pierre Ståhl
Mitko Masarliev
Erik Eriksson
jumpkick
Krasimir Zhelev
Alan Fischer
Andrey
Lindsay Ward
Greg Dowling
Daniel Perna
pavoni
TimV
Wolf-Bastian Pöttner
Scott Henning
Philipp Schmitt
Colin O'Dell
Justin Dray
David McNett
Jose Juan Montes
Sören Oldag
PetePriority
Stuart Mumford
Per Sandström
Pascal Bach
Petr Vraník
Johan Bloemberg
Teemu R
Christian Brædstrup
Stefano Scipioni
Andreas Cambitsis
Josh Wright
miniconfig
Lukas
fakezeta
Hugo Dupras
thecynic
Stu Gott
Jan Harkes
Aaron Polley
Matthew Garrett
joopert
Daniel Hoyer Iversen
Alex
Whytey
anpetrov
Giel Janssens
Anton Lundin
Christiaan Blom
Dan Cinnamon
Johann Kellerman
Martin Vacula
Dan Smith
Oliver
Brandon Weeks
Brent Hughes
Hydreliox
Josh Nichols
Georgi Kirichkov
Albert Lee
IoTGuy
R1chardTM
hexa-
DaveSergeant
GadgetReactor
iandday
Lewis Juggins
Charles Blonde
Thomas Friedel
Sean Dague
John Arild Berentsen
mnestor
jnimmo
Open Home Automation
Finbarr Brady
Frantz
Nicolas Graziano
Ferry van Zeelst
Jon Caruana
Bjarni Ivarsson
Simon Szustkowski
bestlibre
Matthew Treinish
AlucardZero
Martin Hjelmare
David-Leon Pohl
Jason Carter
sam-io
sander76
gwendalg