* Cleanup Basic channnel
Remove unused methods.
* Refactor async_configure() method
Split async_configure() into async_configure() and
async_configure_channel_specfici()
* Refactor async_initilize() method
Split into two different methods and configure channel specifics via
async_configure_channel_specific()
* Fixes
The Zigbee specification mandates that temperatures are given in
1/100ths of degrees, and several devices are able to provide temperature
readings or accept target temperature settings with precision equal or
better than 0.1°C. Yet the ZHA climate entity implementation advertises
an hard-coded precision of 0.5°C.
Avoid arbitrary coarsening by advertising 0.1°C precision, as passing
through the full 0.01°C precision is probably not that useful.
* Refactor ZHA sensors to use cached values after restart
* Get attr from cluster, not channel
* Run cached state through formatter method
* Use cached values for div/multiplier for SmartEnergy channel
* Restore batter voltage from cache
* Refactor sensor to use cached values only
* Update tests
* Add battery sensor test
* Allow coordinator ZDO binding/unbinding operations
* Let coordinator to provide endpoint it
* Refactor ClusterPair to a dataclass
* Rename ClusterPair
* Send pro-active IAS Enroll Response
Some zigbee devices require a pro-active IAS enroll response to be sent before they will send their IAS enroll request. This PR sends a single IAS enroll response after CIE write and fixes some of these devices including the Ecolink 4655BC0-R and many others.
This also more closely aligns with the default behavior of Smartthings and zigbee2mqtt which also send pro-active enroll requests:
b217b91bb7 (diff-6d00af5fc389c40b8c4dfc390d80e3eca3946d331dff84afdc1632cb5568bca2)
Thanks to @puddly for helping figure this all out and @tubalainen for testing.
* flake8 fixes
* flake8 again
* Remove duplicated attribute request from ZHA
The on_off attribute is on the REPORT_CONFIG, so
super().async_initialize already requests it from the device.
No need to request it twice.
* Use skip_configuration flag to skip requests in ZHA
* Fix loading from cache
* Fix loading from cache condition
* Update zha.permit schema to support install code
* Move install code to core helpers
* QR code converter for enbrighten
* Fix schemas
* Update test for permit service
* Refactor zha.permit to accept install codes
* Test zha.permit from QR code
* Fix regex for Embrighten QR code
* Add regex for Aqara QR codes
* Add Consciot regex for QR code
* Reuse test params for WS tests
* ZHA WS permit command with install code
* Tests for zha.permit WS service
* Refactor zha.permit and zha.remove service to use ATTR_IEEE for the address
* Make pylint happy
* Deprecate only ieee_address param for now
* Update ZHA dependencies
* Update zigpy-zigate
* Move ZNP on top of the radios so it's probed 1st
Some stick don't like if there was some unexpected traffic on the port
prior the initialization.
* Update dependencies
* Remove unnecessary exception re-wraps
* Preserve exception chains on re-raise
We slap "from cause" to almost all possible cases here. In some cases it
could conceivably be better to do "from None" if we really want to hide
the cause. However those should be in the minority, and "from cause"
should be an improvement over the corresponding raise without a "from"
in all cases anyway.
The only case where we raise from None here is in plex, where the
exception for an original invalid SSL cert is not the root cause for
failure to validate a newly fetched one.
Follow local convention on exception variable names if there is a
consistent one, otherwise `err` to match with majority of codebase.
* Fix mistaken re-wrap in homematicip_cloud/hap.py
Missed the difference between HmipConnectionError and
HmipcConnectionError.
* Do not hide original error on plex new cert validation error
Original is not the cause for the new one, but showing old in the
traceback is useful nevertheless.
* Refactor cached ZHA channel reads.
If doing a cached ZCL attribute read, do "only_from_cache" read for
battery operated devices only. Mains operated devices will do a network
read in case of a cache miss.
* Use cached attributes for ZHA electrical measurement
* Bump up ZHA zigpy dependency.
Since zigpy change to support bitmap classes, formatting string was incorrectly generated for the newly joined devices with SmartEnergy metering clusters.
* Update ZHA config flow Zigbee radio description
Update ZHA config flow Zigbee radio descriptions to match docs https://github.com/home-assistant/home-assistant.io/pull/13437
* Make protocol plus model names more readable for end-users
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Update homeassistant/components/zha/core/const.py
Co-authored-by: Alexei Chetroi <lexoid@gmail.com>
* Zigbee radio description simplified and examples listed in alphabetical order
* Centralite specific control seq of operation
* Remove Fan safeguards
* Split hvac_action property.
* Refactor hvac_action property.
Current hvac_action logic is Zen Within thermostat specific and differs
a bit from ZCL specs. Implement it as a separate class.
* Refactor hvac_action property for default thermostat
Follow more closely ZCL specs in parsing hvac state of the thermostat.
* Initial ZHA climate implementation.
* Add retryable_request decorator.
sort helpers imports.
* Check manufacturer for Climate implementation.
* Default zha.climate.operation_list to [Off]
* Migrate to climate 1.0
* Sort imports, properties and methods.
* Handle 'PRESET_NONE' presets.
* Use pi_heating/cooling_demand for HVAC action prop.
* Implement `running_state` HVAC channel property.
For ZHA thermostats which don't support `pi_heating_demand` or
`pi_cooling_demand' attributes.
* wip fan support
* Refactor retryable request logging.
* Rebase cleanup.
* Update climate discovery.
* Fix ZHA climate restoration.
* Bulk configure attribute reports.
* Use configure_reporting_multiple command for Light
More detailed response parsing of configure_reporting_multiple.
* Use ordered list for HVAC cluster attribute reports.
* Don't mutilate HVAC mode list.
* Add fan_mode property to fan channel.
* Fix type hinting.
* Expose fan mode only.
* Implement fan mode setting.
Drop support for HVAC_FAN_ONLY mode.
* Use ClimateEntity as base class.
* Cleanup debug code.
* Update time display for Sinope.
* Don't do many retries.
* Don't use multi attr reporting configuration.
* Make tests pass.
* Drop support for setpoint change source/amount.
* Cleanups.
* Drop aux heat
* Update tests.
* Drop Sinope temperature display code.
* Update tests.
* Refactor temperature setting.
* Update tests.
* Update Fan tests.
* Lint
* Black.
* Use correct logging levels
HomeAssistant Azure
David F. Mulcahey
Shulyaka
Paulus Schoutsen
Alexei Chetroi
Abílio Costa
Bas Nijholt
Erik Montnemery
Julien "_FrnchFrgg_" Rivaud
Sébastien RAMAGE
Sébastien RAMAGE
springstan
walthowd
TheJulianJES
Philip Allgaier
puddly
J. Nick Koston
scheric
Samantha
Martin
Ville Skyttä
matgad
Franck Nijhof
Phil Bruckner
Pascal Vizeli
Hedda