* Validate ports as port
Better than just a positive integer since it limits the range from 1 to 65535.
* Validate port for Axis
* Validate port for Xiaomi Home Camera
* Validate port for Modbus
* Validate port for Yamaha MusicCast Receivers
* Update zhong_hong.py
Validate port as a port, the gateway address as positive_int
Also moved the default values to their variable
* Validate port for the Asterisk Voicemail interface
* Fix lint
* Validate port for Xiaomi Cameras
* Initial changes to resolve issue 16733
Added logic to ensure that if the state is unknown during startup that the error about being unable to parse the value is not logged.
Further, also ensured that if an attribute is set to None it does not try to convert the None value to Fahrenheit as that will cause an error.
* Cleaned up and added few comments
Cleaned up some lines based on flake8 and pylint.
Added some comment lines on the items added.
* Changed to async and using async_added_to_hass
Changed sensor to use async.
Registering state tracking for sensors and initial setup is now done upon the home assistant start event.
* Updated test and small fix
Updated test to handle unavailable state of sensor and return of None for attributes when data is unavailable.
Ensured that atributes are set to None when state is unavailable due to incorrect data.
* Fixed some flake8 issues in test
Fixed some flake8 issues in test_moldindicator.py.
* Updates based on review
Updates based on review from MartinHjelmare
* Added sensor entity_id to logger errors
Added sensor entity_id to logger error messages
Update test to use constant STATE_UNKNOWN instead of fixed string.
* ID is added to cards without ID in ui-lovelace.yaml when loaded
* Hound
* Remove ui-lovelace.yaml
* Nicer get
* Update tests
* If YAML dump fails, config not gone
* Add tests
* Woof!
* Remove nosetests
* Address comments
* Woof...
* Delete test.yaml
* update rights to saved file
* fix
* line break
* Updgrae blinkpy to 0.10.0
- Remove status sensor (API endpoint unreliable for this)
- Wifi strength reports in wifi bars rather than dBm (result of new API
endpoint)
- Added unique ids based on serial number
* Update requirements
* add capability for manually specifying IP and port of Konnected device(s)
* add config options for blink and discovery settings
* import konnected only in functions where needed
* updates from code review feedback
* convert manual_discovery to async
* code review updates; use correct sync vs async
I believe this adds registry support. The UI allows me to change
the entity ID now.
For example, a light bulb called "BasementHallLight" in the Vera
has an initial Entity ID like light.basementhalllight_108, where
108 is the unique ID that the Vera assigned the device when I
added it to the z-wave network.
Now I can use the UI to change the Entity ID to
light.basementhalllight and I can still turn it on and off.
* Add device_registry support for sensor and switch domains
* Add device_registry support for light
* Add device registry to binary_sensor, climate, cover
* Add device registry to zwave fan
* Fix test for config entry loading
* lint
* revert erroneous modification
* Revert device_registry.py change
* First commit
* Feature complete?
* Add dependency
* Move setting poe mode logic to library
* Use guard clauses
* Bump requirement to 2
* Simplify saving switches with poe off
* Store and use poe mode
* Fix indentation
* Fix flake8
* Configuration future proofing
* Bump dependency to v3
* Add first test
* Proper use of defaults with config flow (thanks helto)
* Appease hound
* Make sure there can't be duplicate entries of combination host+site
* More tests
* More tests
* 98% coverage of controller
* Fix hound comments
* Config flow step init not necessary
* Use async_current_entries to check if host and site for controller is used
* Remove storing/restoring poe off devices to slim PR
* First batch of switch tests
* More switch tests.
* Small improvements and clean up
* Make tests pass
Don't name device in device registry
* Dont process clients that belong to non-UniFi POE switches
* Allow selection of site from a list in config flow
* Fix double blank lines in method
* Update codeowners
* Fix rangefilter
RangeFilter would break for lower or upper bounds of 0, evaluating to False and thus not being handled correctly as bounds
* Add test for zero bounds
* Migrate CONF_WEBHOOK_ID to homeassistant.const
* Switch over all instances of webhook_id to the const
* Switch last instance of webhook_id to the const
* automation: conf constants for conf
* webhook: conf constants for conf
Daniel Høyer Iversen
Jorim Tielemans
Eduard van Valkenburg
Steven Looman
ehendrix23
Bram Kragten
Paulus Schoutsen
cgtobi
Anders Melchiorsen
Paulus Schoutsen
Ville Skyttä
Kevin Fronczak
Nate Clark
Brant Knudson
Marcel Hoppe
Ben Lebherz
Charles Garwood
Tsvi Mostovicz
William Scanlon
Robert Svensson
Nikolay Vasilchuk
Daniel Shokouhi
Aaron Bach
Alexander Lyon
Daniel Perna
Dougal Matthews
emontnemery
Pascal Vizeli
Niels Mündler
Julius Mittenzwei
Adam
kennedyshead
Rohan Kapoor
Malte Franken