* Add default device class display precision for Sensor
* Renaming, docstrings, cleanup
* Simplify units list
* Fix tests
* Fix missing precision when suggested is specified
* Update snapshots
* Fix when unit of measurement is not valid
* Fix tests
* Fix deprecated unit usage
* Fix goalzero tests
The sensor native_value method was accessing the data dict and trowing,
since the mock did not have any data for the sensors.
Since now the precision is always specified (it was missing for those
sensors), the throw was hitting async_update_entity_options in _update_suggested_precision.
Previously, async_update_entity_options was not called since it had no
precision.
* Fix metoffice
* Fix smartthings
* Add default sensor data for Tesla Wall Connector tests
* Update snapshots
* Revert spaces
* Update smartthings snapshots
* Add missing sensor mock for tesla wall connector
* Address review comments
* Add doc comment
* Add cap to doc comment
* Update comment
* Update snapshots
* Update comment
* Add WS command to help reset custom entity_id
* Calculate suggested object id from entity properties
* Fix logic and add additional tests
* Adjust test
* Update folder_watcher test
* Handle current entity id matches the automatic entity id
* Don't store calculated_object_id
* Update snapshots
* Update snapshots
* Update test
* Tweak logic for reusing current entity_id
* Improve test
* Don't assign same entity_id to several entities
* Prioritize custom entity name
* Update snapshots
* Update snapshots
* Reapply "Add support for subentries to config entries" (#133470) (#136061)
* Reapply "Add support for subentries to config entries" (#133470)
This reverts commit ecb3bf79f3.
* Update test snapshot
* Add config subentry support to device registry (#128157)
* Add config subentry support to device registry
* Apply suggestions from code review
* Update syrupy serializer
* Update snapshots
* Address review comments
* Allow a device to be connected to no or a single subentry of a config entry
* Update snapshots
* Revert "Allow a device to be connected to no or a single subentry of a config entry"
This reverts commit ec6f613151cb4a806b7961033c004b71b76510c2.
* Update test snapshots
* Bump release version in comments
* Rename config_subentries to config_entries_subentries
* Add config subentry support to entity registry (#128155)
* Add config subentry support to entity registry
* Update syrupy serializer
* Update snapshots
* Update snapshots
* Accept suggested changes
* Clean registries when removing subentry (#136671)
* Clean up registries when removing subentry
* Update tests
* Clean up subentries from deleted devices when removing config entry (#136669)
* Clean up subentries from deleted devices when removing config entry
* Move
* Add config subentry support to entity platform (#128161)
* Add config subentry support to entity platform
* Rename subentry_id to config_subentry_id
* Store subentry type in subentry (#136687)
* Add reconfigure support to config subentries (#133353)
* Add reconfigure support to config subentries
* Update test
* Minor adjustment
* Rename supported_subentry_flows to supported_subentry_types
* Address review comments
* Add subentry support to kitchen sink (#136755)
* Add subentry support to kitchen sink
* Add subentry reconfigure support to kitchen_sink
* Update kitchen_sink tests with subentry type stored in config entry
* Update kitchen_sink
* Update kitchen_sink
* Adjust kitchen sink tests
* Fix hassfest
* Apply suggestions from code review
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Improve docstrings and strings.json
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
* Update snapshots
---------
Co-authored-by: Martin Hjelmare <marhje52@gmail.com>
* Add platform number.
* Remove number user_limit.
* Change LED to led in number snapshot.
* Update homeassistant/components/lektrico/number.py
---------
Co-authored-by: Joost Lekkerkerker <joostlek@outlook.com>
* Add Lektrico Integration
* Make the changes proposed by Lash-L: new coordinator.py, new entity.py; use: translation_key, last_update_sucess, PlatformNotReady; remove: global variables
* Replace FlowResult with ConfigFlowResult and add tests.
* Remove unused lines.
* Remove Options from condif_flow
* Fix ruff and mypy.
* Fix CODEOWNERS.
* Run python3 -m script.hassfest.
* Correct rebase mistake.
* Make modifications suggested by emontnemery.
* Add pytest fixtures.
* Remove meaningless patches.
* Update .coveragerc
* Replace CONF_FRIENDLY_NAME with CONF_NAME.
* Remove underscores.
* Update tests.
* Update test file with is and no config_entries. .
* Set serial_number in DeviceInfo and add return type of the async_update_data to DataUpdateCoordinator.
* Use suggested_unit_of_measurement for KILO_WATT and replace Any in value_fn (sensor file).
* Add device class duration to charging_time sensor.
* Change raising PlatformNotReady to raising IntegrationError.
* Test the unique id of the entry.
* Rename PF Lx with Power factor Lx and remove PF from strings.json.
* Remove comment.
* Make state and limit reason sensors to be enum sensors.
* Use result variable to check unique_id in test.
* Remove CONF_NAME from entry and __init__ from LektricoFlowHandler.
* Remove session parameter from LektricoDeviceDataUpdateCoordinator.
* Use config_entry: ConfigEntry in coordinator.
* Replace Connected,NeedAuth with Waiting for Authentication.
* Use lektricowifi 0.0.29.
* Use lektricowifi 0.0.39
* Use lektricowifi 0.0.40
* Use lektricowifi 0.0.41
* Replace hass.data with entry.runtime_data
* Delete .coveragerc
* Restructure the user step
* Fix tests
* Add returned value of _async_update_data to class DataUpdateCoordinator
* Use hw_version at DeviceInfo
* Remove a variable
* Use StateType
* Replace friendly_name with device_name
* Use sentence case in translation strings
* Uncomment and fix test_discovered_zeroconf
* Add type LektricoConfigEntry
* Remove commented code
* Remove the type of coordinator in sensor async_setup_entry
* Make zeroconf test end in ABORT, not FORM
* Remove all async_block_till_done from tests
* End test_user_setup_device_offline with CREATE_ENTRY
* Patch the full Device
* Add snapshot tests
* Overwrite the type LektricoSensorEntityDescription outside of the constructor
* Test separate already_configured for zeroconf
---------
Co-authored-by: mihaela.tarjoianu <mihaela.tarjoianu@scada.ro>
Co-authored-by: Erik Montnemery <erik@montnemery.com>
Abílio Costa
Erik Montnemery
Lektri.co
Norbert Rittel