2.6 KiB

Raw Blame History

Mbed cellular connectivity

This is the Github repo for Mbed cellular connectivity:

easy_cellular/
    EasyCellularConnection  Simplified cellular usage based on `CellularBase.h`
    CellularConnectionUtil  A utility class for cellular connection

framework/
    API         Application Programming Interface for cellular connectivity
    AT          AT implementation based on 3GPP TS 27.007 specification
    common      Common and utility sources
    targets     Vendor specific cellular module adaptations

Known limitations

Please note that this is a first release of Cellular framework and is subject to further development in future.

Only UDP is supported when using AT commands to control sockets in an IP stack built into the cellular modem. If TCP is required, use the PPP/LWIP stack.

Supported modules

You can find currently supported cellular modules in the framework/targets/ folder, where we also add support for new cellular modules.

Cellular configuration

You can change cellular defaults in the mbed_app.json configuration file:

"config": {
    "cellular_plmn": {
        "help": "PLMN selection, 0=auto",
        "value": 0
    },
    "apn": {
        "help": "Access point name, e.g. internet",
        "value": "\"internet\""
    },
    "cellular_sim_pin": {
        "help": "PIN code",
        "value": "\"1234\""
    }
}

Debug traces

You can define the debug tracing level in the mbed_app.json configuration file:

"target_overrides": {
    "*": {
        "target.features_add": ["COMMON_PAL"],
        "mbed-trace.enable": true,
        "platform.stdio-convert-newlines": true,
        "platform.stdio-baud-rate": 115200,
        "platform.default-serial-baud-rate": 115200
    }
},
"config": {
    "trace-level": {
        "help": "Options are TRACE_LEVEL_ERROR,TRACE_LEVEL_WARN,TRACE_LEVEL_INFO,TRACE_LEVEL_DEBUG",
        "macro_name": "MBED_TRACE_MAX_LEVEL",
        "value": "TRACE_LEVEL_INFO"
    }
}

Unit tests

The UNITTESTS folder contains unit tests for cellular specific classes. Unit tests are based on the stubbing method.

You can run those tests locally by running ./run_tests script under the UNITTESTS/ folder.

You need the following applications: cpputest, gcov and lcov (genhtml) for running the tests.

After you have run the run_tests script, you can find test results under UNITTESTS/results folder and line and function coverages under the UNITTESTS/coverages folder.

2.6 KiB Raw Blame History