Even though C/C++11 don't offer pre-op forms (that do the operation then
return the new value) of their freestanding functions, we will be making
them visible via pre-op operators on `Atomic<T>` (++, --, +=, -=, &=,
|=, ^=).
It is easier to do a pre-op than a post-op, as we can use one
fewer register in the assembler, so it's worth optimising for what will
be quite common cases. Make these forms accessible for `Atomic<T>`, but
don't document them for standalone use at this stage.
When the function `error` is called without ending in a newline
greentea will not display the error. This is because greentea is
performing line buffering.
This patch ensures that all calls to `error` end with a newline. This
is done by adding an additional newline to end end of the string.
Example code exhibiting this problem:
error("This function is not supported.");
Greentea output before this change:
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: Fatal Run-time error
Location: 0x1001766D
Error Value: 0x0
Current Thread: main Id: 0x8003FD8 Entry: 0x1000E64F StackSize: 0x1000 StackMem: 0x8004AE8 SP: 0x8005898
For more info, visit: https://mbed.com/s/error?error=0x80FF0100&tgt=target
-- MbedOS Error Info --
test suite run finished after 240.50 sec...
Greentea output after this change:
++ MbedOS Error Info ++
Error Status: 0x80FF0100 Code: 256 Module: 255
Error Message: Fatal Run-time error
Location: 0x1001766D
Error Value: 0x0
Current Thread: main Id: 0x8003FD8 Entry: 0x1000E64F StackSize: 0x1000 StackMem: 0x8004AE8 SP: 0x8005898
For more info, visit: https://mbed.com/s/error?error=0x80FF0100&tgt=target
-- MbedOS Error Info --
This function is not supported.
test suite run finished after 240.50 sec...
Static keyword causes problems when trying to use force-inlined
functions from normal inlined functions. This is not legal:
static inline void forced() { }
inline void normal() { forced(); }
You cannot reference internal-linkage things from external-linkage
inline functions.
Removal of the static implies that in C there would need to be a
non-inline definition in case anyone calls it non-inlined, but if the
force attribute is doing its job, that should not happen.
Only significant in-tree user of the MBED_FORCEINLINE macro is
the atomic operations - making this change permits atomic operations
from non-static inline functions.
As we start trying to use new facilities, we're likely to need some more
helpers.
In particular, ARM C 5 has no C++11 support in its library at all, so
to avoid totally breaking it we need some backup.
For the other toolchains, we can add a few C++17/C++20/TS extensions
into namespace mbed to make life a little easier.
* For ARM C 5: C++14 type_traits subset, std::move, std::forward,
std::array, std::initializer_list, std::begin, std::end,
std::align, std::maxalign_t, std::aligned_storage,
alignof + alignas macro replacements.
* For ARM C 5: MBED_CONSTEXPR_FN_14 and MBED_CONSTEXPR_OBJ_14 to
mark things that can only be constexpr in C++14 or later.
* For other compilers: mbed::void_t, mbed::type_identity,
mbed::conjunction, mbed::disjunction, mbed::negation,
mbed::experimental::nonesuch, mbed::experimental::is_detected family,
mbed::remove_cvref, mbed::as_const.
Newer language standards have standard forms for `MBED_NORETURN` and
`MBED_ALIGN` attributes. Use them when available.
C++14 also adds `[[deprecated]]`, but as it needs to go in the middle of
structure definitions as `class [[deprecated]] MyClass`, it's not a
total drop-in-replacemend for `MBED_DEPRECATED`, so that is not
attempted here.
Using standard forms increases the chances that code analysis tools such
Coverity will recognise them - particularly important for "no return".
The `int : 0` bitfield this produced could force integer alignment onto
the structure it was placed in, making a structure that should be 1 byte
be 4 bytes.
Change `int` to `bool` to minimise alignment impact - should be to
nothing.
Alignment/size problem was revealed in a `sizeof` check in an
`Atomic<uint8_t>` test.
M23 doesn't implement Main Extension. So like M0/M0+, these registers HFSR/
MMFSR/BFSR/UFSR/DFSR are not present on M23. Remove access to them in mbed
fault handler for M23 targets.
Use `+ 1` to set the "Thumb" indicator on the `delay_loop` routine
address, rather than `| 1`. That makes it something that can be done
by the linker, rather than needing to be done at run-time.
Saves one instruction and one cycle.
As the timer code became more generic, coping with initialization on
demand, and variable width and speed us_ticker_api implementations,
wait_us has gradually gotten slower and slower.
Some platforms have reportedly seen overhead of wait_us() increase from
10µs to 30µs. These changes should fully reverse that drop, and even
make it better than ever.
Add fast paths for platforms that provide compile-time information about
us_ticker. Speed and code size is improved further if:
* Timer has >= 2^32 microsecond range, or better still is 32-bit 1MHz.
* Platform implements us_ticker_read() as a macro
* Timer is initialised at boot, rather than first use
The latter initialisation option is the default for STM, as this has
always been the case.
Minor tweaks to fix ARM C 5 compatibility.
Pushing "ns_list.h" include to first makes sure "ns_types.h" is included
first, meaning it gets to define `__STDC_LIMIT_MACROS` before the first
include of <stdint.h>, which ensures that UINT8_MAX etc are defined.
- Changed the process into static method
- used the singletonptr for creating the low power ticker instance
- Added the mbed stub into cmake build for cellularnonipsocket,loramacrypto
-Added the mock class function to mock mbed_assert_internal
-Added the unit test case to test start,kick,stop
-Modified the interface api name from is_alive to process
-added the unit test cases for process
-SW watchdog has interface name start(),stop(),kick() Sw watchdog internally has static list and shared across multiple instance of SW watchdog
- Sw watchdog initialize timeout value,unique string via constructor whenever threads created sw watchdog object
-Threads make sure pass proper timeout value,Unique string while creating the instance.
-start() called by components(BLE,WIFI etc.,),it adds the entry into static list with few details current count ,etc.,
-kick() called by registered components(BLE,WIFI etc.) to reset current count to zero.
-is_alive - interface API to mbed_watchdog_manager
-implementation optimization
- mbed_watchdog_mgr has interface name mbed_wdog_manager_start(),mbed_wdog_manager_stop(),mbed_wdog_manager_kick()
- HwWatchdog is going to attach with LowPowerTIcker for periodic callback functionality
- mbed_wdog_manager_start() will either get start either by BL/RTOS Aps,it reads the timeout value specified via macro and macro gets defined in target.json file.
- mbed_wdog_manager_start() internally configure below HAL hw watchdog with timeout specified via target.json
- mbed_wdog_manager_start() internally divide the timeout(specified in target.json) by the 2 and attach LowPowerTicker with periodic callback of hw_kick()
- mbed_wdog_manager_start() internally create one instance of sw watchdog class,to access the static list data structure of sw watchdog class
- mbed_wdog_manager_kick() function periodically get called and refresh the hw watchdog to avoid watchdog reset
- converted C++ code into C based APIs
- added boolean to control watchdog start and stop
- Added detach from ticker on stop API
In case the CThunk object is deleted without having called the
entry() function (and thus _entry is NULL), cthunk_free_real()
will fail with an assertion.
Correct C++14 operation of the alloc wrappers requires us to define
custom sized delete operators.
Their presence won't cause any problem for people compiling as C++03 or
C++11.
Add unified syntax directives to make the atomic assembler work when GCC
is building for M23.
GCC actually uses unified syntax when compiling C code, but puts
`.syntax divided` before each piece of inline assembly when targetting
Thumb-1 type devices like M0 and M23 for backwards compatibility. We can
overcome this with our own `.syntax unified`. The command-line option
`-masm-syntax-unified` intended to override this globally has been
broken from GCC 6 to 8.0.
Some targets may not provide zero-wait-state flash performance. Export this function
to be overridable for targets to provide more accurate implementation like locating
'delay_loop_code' in SRAM.
Imports working McuBoot for reset.
Updates microsec ticker driver.
Default baudrate is set to 115200 to see TF-M boot messages.
Stack top is set to scatter file dependent and not hard-coded.
Kevin Bracey
Martin Kojtal
Russ Butler
Tymoteusz Bloch
Przemyslaw Stekiel
Chun-Chieh Li
Anna Bridge
Rajkumar Kanagaraj
Teijo Kinnunen
Steven Cartmell
Jaakko Korhonen
Gabor Kertesz
Marcus Chang