LWIP stack is configured to be 1200 as default. Without debug enabled,
maximum stack size used for asynchronous DNS operations is 880 bytes. With
debug enabled maximum used stack size is 1248. Added configuration
to LWIP to increase stack size by 25 percent when debug is enabled on build.
Set correct SYSMPU register for proper USB operation. This bug was
introduced when the SYSMPU register names and defines were updated
in the commit:
"K64F: Updated the SYSMPU SDK driver"
93f8cfed05
Nanostack object constructor didn't actually initialise Nanostack.
Nanostack initialisation was deferred until an interface was actually
attached to the stack, which generally happened at first interface
connect.
Not normally a problem, unless you're trying to make direct Nanostack
setup calls prior to connect - some applications do this, and were
relying on ThreadInterface::initialise to do Nanostack
initialisation.
Unfortunately in 5.9 ThreadInterface::initialise no longer does
initialise Nanostack immediately, because the mesh interfaces were
aligned and integrated with the Ethernet interfaces, which did
initialisation on connect().
Make the Nanostack object constructor initialise Nanostack (as the LWIP
constructor does for lwIP), so calling Nanostack::get_instance() is the
5.9 API for Nanostack initialisation.
For future work, APIs like ns_file_system_set_root_path should be
exposed as methods of Nanostack, so everything happens with a single
Nanostack::get_instance().file_system_set_root_path().
- set ppp_active false if close fails in ppp disconnect.
- unset sigio in ppp disconnect
- take ownership of filehandle in CellularNetwork::disconnect even in case of failure
A friend class living in the namespace ble::vendor::cordio and named CordioHCITransportDriver can be added in applications requiring access to internal data of the HCI driver and HCI transport driver.
This is meant to be internal and not easily exploitable by application code.
Two cascading copy-paste errors stopped this working:
* PPPCellularInterface::get_gateway() called
nsapi_ppp_get_ip_address();
* nsapi_ppp_get_gateway() called the interface's get_netmask().
First bug has always been there - second one was introduced in 5.9.
AT_CellularNetwork currently lacks calls to get both netmask and gateway
- this patch would be needed for that when added.
Previously get_mac_address on a ThreadInterface returned the EUI-64
reported by the radio driver. This was required for commissioning, but
was inconsistent with other interfaces, and the API concept.
5.9.0 inadvertently changed this so that get_mac_address returned the
actual MAC address used by the radio, which is a hash result of the
EUI-64 for Thread.
The original "return the EUI-64" form was somewhat faulty, as
get_mac_address would not return the EUI-64 set by set_device_eui64() or
another mechanism before connect() was called.
Rather than revert to old behaviour, add a new API to get the device
EUI-64 to ThreadInterface, alongside the existing set API.
Cruz Monrreal
Anna Bridge
Mika Leppänen
Teppo Järvelin
David Saada
Ari Parkkila
Yoshihiro TSUBOI
Amanda Butler
Russ Butler
Kevin Bracey
Martin Kojtal
paul-szczepanek-arm
Vincent Coubard
Krzysztof Stachowiak