* * Base Commit for SAMG55J19. No errors and no implementations.
* * Added gpio files.
* * Added pinmap files.
* * Base commit for usticker implementation.
* * Added gcc_arm export functionality
* * added files for usticker.
* added template file for samd55j19
* * GPIO IRQ base commit.
* * updated with changes in gpio irq driver.
* * Reverted back unexpected commit in SAM0 gpio driver.
* * updated gpio_irq driver.
* * correction in gpio and gpio_irq drivers.
* added support for some test for gpio.
* * base commit for peripheralpins for usart.
* update in serial apis.
* * updated serial apis.
* * updated serial apis and test.
* * update serial apis for asynch apis.
* * updated peripheral pins for i2c and spi.
* added test support for serial flow control
* * Base commit for low power ticker implementation.
* * base commit for port apis.
* update in lp ticker apis.
* * Added test support for port.
* * base commit for sleep apis.
* * Base commit for spi.
* * updated with corrections in gpio irq.
* usticker file updated with latest source.
* * updated with corrections for unexpected board reset.
* updated gpio irq apis and added test for the same.
* * updated sleep api for deepsleep.
* * updated serial apis.
* Added uc_ticker and SPI api implementations
* Removed unused SPI pin map
* Updated review feedback
* * implemented lpticker with TC module.
* updated files for KnR Coding Statndard.
* updated serial and usticker apis.
* * Base commit for AnalogueIn apis.
* * RTC apis base commit without implementation.
* * Updated with corrections in lpticker implementations.
* * Added implementation for rtc apis.
* * updated with implementations for pwm.
* changed usticker from TC0 to TC1.
* Added I2C support
* * removed setvector usage from usticker and lpticker implementations
* added tests for SAMG55J19
* * Removed unwanted .o and .d files.
* Updated I2C files for KnR Coding Standards.
* Update for reducing compiler warnings in peripheralpins,c
* Updated with PWM free implementation.
* * Removed unwanted headers file inclusion.
* Compiler warning corrections in serial_api.c
* * Updated ADC with 16 bit mode initialization and code refinements.
* Updated PWM with code refinements.
* Updated I2C review feedback and fixed style
* Updated target name for SAMG55
* * Added Test Support for I2C with AT30TSE75X and Added Support for SAMG55J19 in atmelstudio project exporter
* * Added Test Support for I2C with AT30TSE75X and Added Support for SAMG55J19 in atmelstudio project exporter
* Used NVIC_SetVector for interrupt callback
* Removed Target macro define in test
* Updated test cases to have SAMG55 support
* * Updated with corrections in Serial and SPI asynchronous implementations.
* Updated deepsleep api implementation
* Merged LP_Ticker with latest code from mbed 3.0 repository.
* * updated with corrections in I2C Asynch implementation.
When a ticker is scheduled to run so fast that it is pending again
before the previous event has been processed then this next event
is processed (recursively) by calling into us_ticker_irq_handle().
This can lead to a stack overflow.
This patch prevents this recursion by replacing the call to
us_ticker_irq_handler() with a call to set the interrupt to pending
again. This allows the next timer event to be processed without
making the stack deeper.
UART_IT_TC was enabled instead of UART_IT_TXE
This was causing an issue because UART_IT_TXE (and not UART_IT_TC) was disabled by same function.
Consequently if a transfer was ongoing when serial_irq_set() was called to disable IRQ, UART_IT_TC would still trigger (once).
Side effect is maybe speed: I guess using UART_IT_TC prevented implementation of continuous transfer.
This commit is focused on solving an issue observed with TARGET_STM32F4. It doesn't presume it should or shouldn't be done for other targets.
When two or more analogue inputs are initialized on more than one ADC HW block the initialisation fails with:
Cannot initialize ADC
The reason is the reusage of just one ADC_HandleTypeDef for all initializations (in mbed\targets\hal\TARGET_STM\TARGET_STM32F3\analogin_api.c). After the first (successful) ADC initialisation AdcHandle.State is set to HAL_ADC_STATE_READY).
But for another ADC block initialisation the AdcHandle.State has to be reset so that the HAL initialize it (in mbed\targets\cmsis\TARGET_STM\TARGET_STM32F3\stm32f3xx_hal_adc_ex.c line 424). When this state is not reset the HAL returns with an initialization error. And this error induces the above mbed error message.
The error message can be reproduced just with AnalogIn in1(xx); AnalogIn in2(yy); where xx and yy belongs to two different ADC blocks.
Toyomasa Watarai
Parthasarathy
dbestm
Martin Kojtal
Russ Butler
bcostm
tomoyuki yamanaka
Mike Fiore
Arnaud RICHARD
sunsmilearm
Xiao Sun
neilt6
Peter Conheeney
adustm
ohagendorf