For STM32 targets using a 32-bit timer for the microsecond ticker, the
driver did not properly handle timestamps that are in the past. It
would just blindly set the compare register to the requested timestamp,
resulting in the interrupt being serviced up to 4295 seconds late
(i.e. after the 32-bit timer counts all the way around to hit the
timestamp again).
This problem can easily be reproduced by creating a Timeout object
then calling the timeout's attach_us() member function to attach a
callback with a timeout of 0 us. The callback will not get called for
over 2147 seconds, and possibly up to 4295 seconds late if no other
microsecond ticker events are getting scheduled in the meantime.
Now, after the compare register has been set, the timestamp is checked
against the current time to see if the timestamp is in the past, and
if so, the compare event is manually set.
NOTE: By checking if the timestamp is in the past after configuring the
capture register, we ensure proper handling in the case where the timer
updates past the timestamp while setting the capture register.
If you are using Ethernet, and not SPI Arduino pins:
=> keep your board with the default configuration
If you are using SPI Arduino pins, and not Ethernet:
=> you should remove the JP6 bridge on the front side of the board
If you need SPI Arduino and Ethernet:
=> you have to patch the NUCLEO board on the back side: set solder bridge SB121 to off, and SB122 to on
=> D11 is no more connected to PA_7 but to PB_5
=> overwrite d11_configuration config value in json file
Revert HRM1017 file source deletion
Added in small comment next to additions
Added mapping to BTN-labelled switches
Added mapping to USER_BUTTON-labelled switches
Undo incorrect mapping to SWIO pin in NORDIC target
Targets NUCLEO_F429ZI and UBLOX_EVK_ODIN_W2 have 192K RAM.
Heap size in PR #3871 was increased from 48K to 96K as tls-client
example failed with 48K heap. But this resulted in compilation failures
in mbed-client that requires 71K for global/static data.
Hence this PR reduces heap to 64K that minimum required by tls-client
to work. This also meets mbed-client data segment requirements.
Check in flash algos for the K64F, KL46Z, F429, F439 and Odin board
and enable these features accordingly in targets.json. This
implementation uses flash algo blob that are generated via scripts.
The K64F and KL46Z were generated directly from packs, while the
KL46Z, F429, F439 and odin were generated from code checked into
the FlashAlgo repo.
The address of the vector table is hardcoded to the start of flash in
many, if not all, ST targets. This causes a crash in applications that
are using a bootloader. This patch updates the boards STM32F429xI,
STM32F439xI and Odin so they properly handle updating the VTOR with
a bootloader.
Add MBED_APP_START and MBED_APP_SIZE to the stm32f429's linker script
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
With the RTOS, the STACK_SIZE specified here is unrelated to the stack
size available for the main thread (that runs pre_main). Save memory by
reducing the stack size to a more reasonable amount.
On uVisor, HEAP_SIZE is both a minimum available and maximum available
heap size. The heap can't grow beyond the end of the heap into the
neighboring stack. On all uVisor-supported platforms, guarantee at least
0x6000 bytes of heap space. This increases the portability of uVisor
applications as the memory available for legacy heap allocations is
guaranteed. This helps to avoid out of memory errors on platforms that
were previously guaranteeing less memory.
Sam Grove
Bradley Scott
Bartek Szatkowski
Martin Kojtal
Bartosz Szatkowski
jeromecoutant
Anna Bridge
Kevin Gilbert
Mihail Stoyanov
0x6d61726b
0xc0170
Mohammad Azim Khan
Michel Jaouen
adustm
Christopher Haster
Russ Butler
Russ Butler
Jaeden Amero