* capitalize driver class name,
* reword test docs for the driver & HAL,
* capitalize Mbed name,
* reword the comments explaining the SERIAL_FLUSH_TIME_MS macro.
The latest rebase of the watchdog feature branch introduced errors in compiling
watchdog tests due to missing headers.
- Watchdog HAL API test
Include missing header files to main.cpp (mbed_wait_api.h, stdlib.h).
- Watchdog HAL API timing test
Include missing header files to main.cpp (us_ticker_api.h).
- Watchdog Driver API test
Include missing header files to main.cpp (mbed_wait_api.h, stdlib.h).
Inject mbed namespace into main.cpp to fix Watchdog name resolution.
On NUMAKER_PFM_NANO130 target, WDT's clock source is fixed to LIRC, which is much
less accurate than other targets. Enlarge delta define to pass this test.
On platforms using coretx m33 accessing the secure memory will cause SecureFault instead of Hardfault.
SecureFault is implemented in the secure image and cannot be changed in runtime.
Add calls to `mbedtls_platform_setup()` and
`mbedtls_platform_terminate()` to the trng greentea test, to
initialize the hardware acceleration engines, in some platforms.
Test checks stack sizes:
- ISR stack: exactly 1KB (with exception for NORDIC - 2KB and RENESAS - Cortex A targets not supported for this test)
- Main thread stack: exactly 4KB (with some exceptions - 3KB)
- Thread stack: exactly 4KB
Frequency setting just after erase operation was causing some data
inconsistencies during write/read operations on some targets (frdm-k82f).
To fix this, frequency setting was moved before flash memory init.
The DEVICE_FOO macros are always defined (either 0 or 1).
This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
For enhanced security ARMv8-M firmware doesn't allow the hardfault
handler to be hooked by non-secure code. Because of this there is no
way to recover from the MPU fault tests. This PR disables those tests
until hardfault recovery is supported by secure firmware.
Ensure that code written to ram is flushed and that caches are cleared
before attempting to executing from ram. This fixes CI failures on the
MPU test when it is built for Cotex-M7 devices such as the
NUCLEO-F746ZG.
Make the following changes:
-Allow a vector specific ARM MPU driver by defining MBED_MPU_CUSTOM
-Allow ROM address to be configured for ARMv7-M devices by
setting the define MBED_MPU_ROM_END
-Add ROM write protection
-Add new functions and lock
-enable at boot
-disable during flash programming
Create a dedicated MPU directory for standard Arm MPU implementations
in preparation for the Arm v8m MPU. Replace MBED_MPU_ENABLED with
DEVICE_MPU to align with the porting layer of other HAL APIs.
When programming flash using the FlashIAP API allow execution from
ram. Many devices require flashing to be done from RAM.
Also allow execution from ram when running the low level flash tests.
Test that the MPU correctly stops execution of memory in the stack
region, heap region, data region and bss region. Also check that the
MPU can be enabled, disabled and freed.
Mel W
Filip Jagodzinski
Donatien Garnier
Steve Cartmell
ccli8
Filip Jagodzinski
Martin Kojtal
Guillermo Alonso
Kevin Bracey
Ryan Morse
Cruz Monrreal II
Oren Cohen
Ron Eldor
Russ Butler
Przemyslaw Stekiel
jeromecoutant
Maciej Bocianski
Alexander Zilberkant
Alastair D'Silva