Receive API should return the length of data written to the user buffer
as the Posix APIs suggest rather than sending the pending length of data
back.
That has actually been a typo mistake which actually wnt in even with doicumentation :)
The EventQueue thread in LoRaMac.cpp is disbanded and the LoRaWAN
protocol is redesigned to store a pointer for an application
provided EventQueue. It means that now the stack runs in the
same thread as application. Application provided EventQueue is used
to defer ISRs from radio driver and timer callbacks as well as the
application events are queued to the same event loop.
This class is the doorway for the user application into the
Mbed-OS implementation of LoRaWAN protocol. It implements LoRaWANBase
and hence would work with any stack implementation underneath, ensuring
seemless portability for applications.
It takes a pre-constructed object of LoRaRadio and delegates it in the
downward direction. Before calling connect() user must call initialize() function
in order to initialize stack and mac layers.
connect() APIs can be used to either provide relevent keys and connection method at
runtime or compile time (using Mbed config system).
enable_adaptive_datarate() and disable_adaptive_datarate() are used to turn on/off
automatic rate control. Otherwisem set_datarate() could be used to set a particular
data rate on the current channel.
set_confirmed_msg_retries() is valid only for CONFIRMED messages. It means that the stack will
retry for a given number of times before timing out.
set_channel_plan() and get_channel_plan() are used to set or get a particular channel plan.
These APIs are particularly useful in case of ABP (activation by personalization). Because
in case of OTAA(over the air activation), by default the stack takes in a CF List (carrier frequency list)
sent by the base station in conjunction with Network server. This list overwrites all user configured
channels or channel plan. set_channel_plan() can be used to set a single channel as well by setting the
parameter for number of channels to 1.
remove_channel_plan() or remove_channel() are used to remove a currently active channel plan or a specific
channel.
send() and receive() APIs follow posix design except the socket descriptor is replaced with port number here.
lora_event_callback() API is used to set a callback function from the application side which is used by the stack
to inform user of particular events like CONNECTED, DISCONNECTED, CRYPTO_FAILURE, TX_TIMEOUT etc.
LoRaWANStack class is our controller layer on top of our
current MAC and PHY layer. It provides services to an implementation
of LoRaWANBase class.
It is a singleton class owing to the fact that the mac layer underneath
is not a class object. Instead, it uses the MAC via setting mib, mlme, mcps
requests and getting responses back from the mac layer using confirmations and
indications.
In essense this class is a special handle for
mac layer underneath which is predominantly reference design based.
In future we may refactor the LoRaMac.cpp code to make it object oriented
and cleaner.
At one end, it binds the application selected radio driver with the PHY layer
and at the other end it provides services to upper layers handling the mac via
well defined APIs.
For proper selection of a PHY layer, user must use Mbed config system.
For this purpose an mbed_lib.json is provided which can be overriden by the
user defined mbed_app.json. By default the EU868 band is selected as a PHY layer.
User must set relevant keys for the selected connection mechanism.
The actual mac algorithms are being used as it is in the reference
implementation.
We introduce an internal class that starts a thread and constructs an event queue
to handle deffered calls from interrupt context for RTOS. The code base is
compatible with Mbed-OS 2 as well.
GetPhyEventHandlers() API provides mac callback funtions for PHY layer,
which are in turn delegated to radio driver from the PHY layer.
LoRaMacInitialization() is augmented with LoRaPHY parameter which let's
the MAC layer know which particular PHY layer is in use.
LoRaMacSetTxTimer() and LoRaMacStopTxTimer() are used when duty cycle is
off for testing purpose or to support custom application timers.
If the duty cycle is off, mac and phy layer work togather to figure
out the next possible transmission time.
LoRaMacCrypto APIs are provided which provide seemless integration of
mbedTLS into mac layer for cryptography. User application is supposed to
provide proper mbedTLS configuration file.
All other APIs are retained as it is.
LoRaPHY is the abstract class for the LoRa PHY layer which governs
the LoRaRadio and provides some common functionality to all regional
implementations.
We support 10 regions and every region comes loaded with default parameters.
These parameters can be changed by the Mac layer or explicitely by the stack
controller layer using APIs provided. This layer in essence detaches Mac completely
from PHY and provides more modular approach to the entire system.
Apart from class structure, the internal functionality is directly deduced from
semtech reference implementation that's why most of the internal data structures are
used on 'as is' basis.
In addition to that, the PHY layer provides APIs to control the LoRaRadio layer, i.e.,
the lora radio driver, ensuring that the radio is accessed from a single entry point.
A seperate data structure file is added which is common to PHY layers only.
All network interfaces for LoRaWAN protocol must implement this
class. In order to be compatible with Mbed-OS applications, any
implementation of this class must use the data structures and
Mbed-OS timers provided.
lorawan_data_structures may look repetitive but this is essential
as we have a plan to use a reference implementation for LoRaWAN mac
layer from Semtech. Some of the data structures provide seemless
transition from semtech implementation (as MAC layer) to the Mbed-OS
control layers above.
features/lorawan/lorastack is the placeholder for future items like mac and
phy layers. system/ will contain all the common bits.
All Mbed-OS drivers for LoRa radio devices must implement
this pure virtual class in order to be compliant with Mbed-OS
applications.
This class comes loaded with all necessary data structures.
The implementations of this class can come out of tree.
We currently don't have a mechanism for selecting tests based on the
available ram/heap, so the best solution right now is to disable these
tests specifically for this target.
Documentation states that nsapi_dns_query_multiple returns the number of
addresses found on success - it was returning 0.
Overloads using SocketAddress are relying on the return value, meaning
those calls didn't work at all.
Fixes#5921.
Hasnain Virk
Martin Kojtal
Cruz Monrreal
Kari Severinkangas
Antti Yli-Tokola
Wilfried Chauveau
Oren Cohen
Kimmo Vaisanen
Christopher Haster
adustm
Amanda Butler
Kevin Bracey
bcostm
Jani Suonpera