88a4baa2ad
Merge pull request #3902 from mazimkhan/master
...
Fix heap and stack size for NUCLEO_F746ZG
2017-03-09 16:51:40 -06:00
bb197b29f3
Fix heap size for NUCLEO_F746ZG on IAR
2017-03-09 16:51:24 +00:00
45c99e69ca
Merge pull request #3879 from bcostm/fix_nucleo-f446ze_adc_pins
...
NUCLEO_F446ZE: Add missing AnalogIn pins on PF_3, PF_5 and PF_10.
2017-03-09 15:48:10 +00:00
68dc25331a
Merge pull request #3843 from bcostm/fix_stm32l4_apb2_80MHz
...
STM32L476xG: set APB2 clock to 80MHz (instead of 40MHz)
2017-03-09 15:44:08 +00:00
c3e7b5434c
Merge pull request #3842 from anangl/fix_spi_api
...
TARGET_NRF: corrected spi_init() to properly handle re-initialization…
2017-03-09 15:43:13 +00:00
1c4e0d7dcb
can_write(): return error code when no tx mailboxes are available. ( #3829 )
2017-03-09 15:42:00 +00:00
6aa62c1956
Merge pull request #3828 from jeromecoutant/PR_CAN_TYPE
...
STM32 CAN API: correct format and type
2017-03-09 15:40:01 +00:00
fd6fdd5f8c
Merge pull request #3795 from LMESTM/fix_pwm_period_calc
...
Fix pwm period calc
2017-03-09 15:39:00 +00:00
400b89eeda
Fix XDOT compilation error
...
Typo with misplaced closing parenthesis leads to compilation error,
which is fixed with this patch
2017-03-07 17:22:25 +01:00
b2726470f6
Merge pull request #3880 from adustm/fix_can2_only
...
DISCO_F469NI: allow the use of CAN2 instance when CAN1 is not activated
2017-03-06 16:57:57 +00:00
f39deb518c
Merge pull request #3860 from MultiTechSystems/xdot-gpio-fix
...
Define GPIO_IP_WITHOUT_BRR for xDot platform
2017-03-06 16:56:29 +00:00
e6b8ed2754
Merge pull request #3850 from LMESTM/fix_spi_warn
...
STM32: change spi error to debug warning
2017-03-06 16:55:58 +00:00
aa6a71bd0c
Merge pull request #3844 from bcostm/fix_comments_gpio_object
...
STM32 GPIO: Typo correction. Update comment (GPIO_IP_WITHOUT_BRR)
2017-03-06 16:54:39 +00:00
ede2a11be4
Merge pull request #3840 from LMESTM/fix_smt32_gpio_default_speed
...
STM32: gpio SPEED - always set High Speed by default
2017-03-06 16:54:08 +00:00
1be7418883
Merge pull request #3836 from cuvva/master
...
Allow to redefine nRF's PSTORAGE_NUM_OF_PAGES outside of the mbed-os
2017-03-06 16:53:31 +00:00
c975c2ba71
Merge pull request #3831 from pradeep-gr/feature-spi-slave
...
NCS36510: SPISLAVE enabled (Conflict resolved)
2017-03-06 16:51:37 +00:00
8fb95a6507
Merge pull request #3780 from pmancele/master
...
STM32L4 : Fix GPIO G port compatibility
2017-03-06 16:51:03 +00:00
750ac5152f
Merge pull request #3741 from jeromecoutant/PR_TICK32
...
STM32 remove warning in hal_tick_32b.c file
2017-03-06 16:49:52 +00:00
f168f6233a
Merge pull request #3716 from adustm/disco_f429zi_debug
...
fix for issue #3715 : correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files
2017-03-06 16:49:19 +00:00
ae6899b448
STM32L4xx: set APB2 clock to 80MHz (instead of 40MHz)
2017-03-06 13:34:01 +01:00
67a75d96c6
STM32 CAN API: correct format and type
...
astyle done
2017-03-06 11:34:20 +01:00
18c1618637
DISCO_F469NI: allow the use of CAN2 instance when CAN1 is not activated
2017-03-03 17:05:28 +01:00
e70d985fa3
Add AnalogIn pins on PF3, PF5 and PF10.
...
Don't know why it was missing ?
2017-03-03 16:57:16 +01:00
1f0d73162c
Increase HEAP size for UBLOX_EVK_ODIN_W2 and NUCLEO_F429ZI
2017-03-02 14:11:21 +00:00
4213c61073
TARGET_NRF: added a description of the recent change in spi_init().
2017-03-02 13:47:37 +01:00
2613380854
[XDOT_L151CC] Define GPIO_IP_WITHOUT_BRR for xDot platform. Resolves #3823 .
2017-03-01 12:53:31 -06:00
d69c5edbd4
fix for issue #3715 : correction in startup files for ARM and IAR, alignment of system_stm32f429xx.c files
2017-02-28 18:15:06 +01:00
00bfa3bf4a
STM32: change spi error to debug warning
...
In case the selected frequency is higher than the requested one, it is
better to send a debug warning rather than an blocking error.
In case of such warning, user may need to redefine the clock tree setting
at higher level (reducing peripheral's input clocks during init phase).
2017-02-28 17:00:29 +01:00
3842f6ea0a
STM32: fix formatting
...
Use the recommended style
if (condition) {
do();
} else {
do_else();
}
2017-02-27 17:07:05 +01:00
747e8e1ea1
STM32: move pwmout device tables to C file
...
In order to avoid possible multiple definitions errors, move the table
initialization to the C file instead of header file
2017-02-27 17:07:01 +01:00
d03f96741e
Typo: update comment (GPIO_IP_WITHOUT_BRR)
2017-02-27 16:32:44 +01:00
678f3f9966
TARGET_NRF: corrected spi_init() to properly handle re-initialization on the same pins + minor editorial corrections.
2017-02-27 13:48:55 +01:00
8e5d2eb1dc
STM32: pwm period and prescaler calculation
...
Correct the while loop limit and add a safe guard to avoid infinite loop.
2017-02-27 13:47:34 +01:00
453b248bf4
STM32: gpio SPEED - always set High Speed by default
...
Up to now, speed was set for outputs and alternate, but this is
also valid for input configuration.
By default, let's configure high speed.
This is done firts, because speed for some families like F1 is mixed
with Input/Output mode settings, so can be later over-ridden if needed.
2017-02-27 11:11:02 +01:00
c4a979ef72
Allow to redefine nRF's PSTORAGE_NUM_OF_PAGES outside of the mbed-os source
...
By default the number of pstorage pages is set 1 and all addresses are
calculated in the pstorage module accordingly. Nordic recommends
changing this macro to whatever number is suitable for the app (see
https://devzone.nordicsemi.com/question/53066/what-will-be-the-starting-
address-of-pstorage-page-how-we-can-change-it/?answer=53085#post-id-5308
5) which is not quite elegant given that pstorage_platform.h is part of
the mbed-os repo. With this modification you can e.g. define
PSTORAGE_NUM_OF_PAGES on the command line, however note that you should
rebuild mbed-os with this setting as it affects pstorage_platform.c.
2017-02-24 11:24:24 +00:00
b6fe5abb10
Merge pull request #3743 from jeromecoutant/PR_RTC_UPDATE
...
STM32 RTC api minor update
2017-02-23 10:19:11 -06:00
ba2176323c
Merge pull request #3733 from theotherjimmy/feature-bootloader
...
Enable boot-loader builds
2017-02-23 10:18:31 -06:00
4678a31efa
Conflict resolved
2017-02-23 18:47:15 +05:30
48c63cacdb
Use #if defined TARGET_STM32L4
2017-02-23 09:32:12 +01:00
d62f046e57
Fail bootloader builds on targets that don't support it
...
This patch will prevent building bootloader builds on targets that have
not yet had their linker scripts/scatter files changed to allow for the
ROM space shrinking expected by bootloader builds. At the point of this
patch, bootloader linker script modifications are only supported by the
NUCLEO_F429ZI, K64F, KL46Z, and Odin.
2017-02-22 18:27:23 -06:00
aff49d8d1e
Renamed files in platform to match source names
...
critical.h -> mbed_critical.h
sleep.h -> mbed_sleep.h
toolchain.h -> mbed_toolchain.h
rtc_time.h -> mbed_rtc_time.h
semihost_api.h -> mbed_semihost_api.h
wait_api.h -> mbed_wait_api.h
2017-02-22 18:17:54 -06:00
a8a31da2e8
Merge pull request #3737 from bcostm/dev_can_factorization
...
STM32: can_api.c files factorization
2017-02-22 13:36:59 -06:00
5c28715fbd
Merge pull request #3742 from jeromecoutant/PR_SLEEP
...
STM32 : minor update in sleep HAL file
2017-02-22 13:35:01 -06:00
355f69a11d
Merge pull request #3802 from ARMmbed/feature-flash-api
...
Merge the feature-flash-api branch into master
2017-02-22 13:31:41 -06:00
5491ccc0a6
Merge pull request #3803 from TomoYamanaka/master
...
Bug fix of initial value of interrupt edge in "gpio_irq_init" again
2017-02-22 13:21:13 -06:00
0733fe0778
Merge pull request #3814 from 0xc0170/fix_i2c_delay_onsemi
...
NCS36510: I2C idle delay of 1us
2017-02-22 13:20:17 -06:00
248dbaabe2
Fix GPIOG usage of STM32L4 by activating VDDIO2 power supply
2017-02-22 16:44:28 +01:00
3a83fc8a21
STM32 RTC api minor update
...
Add more detailed information in comments
Issue with sunday corrected
Issue with wrong rtc_isenabled status corrected
2017-02-22 08:50:58 +01:00
071235415e
Add K64F, KL46Z, F429, F439 and odin flash algos
...
Check in flash algos for the K64F, KL46Z, F429, F439 and Odin board
and enable these features accordingly in targets.json. This
implementation uses flash algo blob that are generated via scripts.
The K64F and KL46Z were generated directly from packs, while the
KL46Z, F429, F439 and odin were generated from code checked into
the FlashAlgo repo.
2017-02-21 14:09:06 -06:00
ff41cc97ae
Merge pull request #3806 from 0xc0170/fix_issue#2989
...
NXP KL43Z/KL27Z: fix spi format bits check
2017-02-21 17:13:07 +00:00
Sam Grove
Mohammad Azim Khan
Martin Kojtal
Simon Vogl
Laurent MEUNIER
bcostm
jeromecoutant
adustm
Głąbek, Andrzej
Mike Fiore
Hovik Melikyan
U-ONSEMI\fg64rh
Pierre-Marie Ancele
Jimmy Brisson
Christopher Haster
Russ Butler