Previously, extended advertising parameters failed to be set
during BLE initialisation when the stack was not ready.
To work around this, we delay it to the first use of
useVersionTwoAPI.
Fix LWIP warning issues found by Coverity scan
lwip_dns.c in function: dns_add_interface_server
CID 1399051 (#1 of 1): Buffer not null terminated (BUFFER_SIZE_WARNING)10. buffer_size_warning: Calling strncpy with a maximum size argument of 6 bytes on destination array new_interface_server->interface_name of size 6 bytes might leave the destination string unterminated.
line 434 strncpy(new_interface_server->interface_name, interface_name, INTERFACE_NAME_MAX_SIZE);
lwip_ip4_frag.c in function: ip_reass_free_complete_datagram
CID 1373164 (#1 of 1): Dereference after null check (FORWARD_NULL)7. var_deref_model: Passing null pointer prev to ip_reass_dequeue_datagram, which dereferences it. [show details]
line 209 ip_reass_dequeue_datagram(ipr, prev);
lwip_ip4_frag.c in function: ip_reass
CID 1373163 (#1-2 of 2): Dereference after null check (FORWARD_NULL)38. var_deref_model: Passing null pointer ipr_prev to ip_reass_dequeue_datagram, which dereferences it. [show details]
line 663 ip_reass_dequeue_datagram(ipr, ipr_prev);
lwip_api_msg.c in function: lwip_netconn_do_connected
CID 1373162 (#1 of 1): Explicit null dereferenced (FORWARD_NULL)10. var_deref_model: Passing null pointer op_completed_sem to sys_sem_signal, which dereferences it. [show details]
line 1336 sys_sem_signal(op_completed_sem);
Automatically enable entropy injection when the NV Seed feature is
requested on PSA targets. Add a warning note describing the state of the
current implementation of the entropy injection API.
Fixes#10720
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
The USB Device must change the address within 2 ms after completing
SET ADDRESS status stage.
Wait 2 ms before issuing GET DESCRIPTOR under the new address. In my
case, this completely resolves the timeout issues.
On STM32F746G Discovery boards, the USB OTG HS port does not have a
dedicated GPIO for controlling the USB VBUS.
This change fixes HardFault (NULL pointer dereference) that triggered
when such USB host port was used.
The deprecation notice suggests getConnectionCount() which
did not land in the final API. The proper replacement is keeping
your own record and updating during connection and disconnection
callbacks.
When importing development releases of Mbed TLS into Mbed OS, it is
useful to be able to know a the particular git commit hash that was
imported. This change avoids ever creating a VERSION.txt for Mbed TLS
containing only "development", which is fairly useless since one doesn't
know where the development branch was at the time of import.
As per official specification, temperature measurement requires
the GATT characteristic "INDICATE" instead of "NOTIFY".
Full credits to Jean-Marc Jobin (@jmjobin on GitHub) for
identifying the issue and proposing this fix.
This modem is a special case. It uses a given socket ID value rather
than providing one. A naive solution here would be to directly map the
index of a CellularSocket object in the CellularSocket container. But
considering the case where there are multiple sockets being opened (some
sockets being already created at the modem and some yet not created), direct mapping
to indices will not work. As it can happen that the CellularSocket
object is allocated but the socket id is not assigned yet as it is not
actually created on the modem.
In such a case, we check the container and assign the socket id from the
pool if an empty slot was found.
Local modem ip stacks vary in their implementations and the way of
working. Some of the modems may not open a socket until an IP context is
assigned. That's why we came up with a container that stores addresses of
any CellularSocket instances created on-demand by the application. When
the application requests opening a socket we store allocate and store the
premitive in the container however actual socket creation at the modem
may happen at a later stage, e.g., a call to send_to() may result in
actual opening of a socket.
That's why we must not assign socket ids in the CellularSocket object
during construction. It must happen when actual socket is opened and is
alive.
Another implication of the previous model is that we may have multiple
sockets created in our container but the actual socket ids are not
assigned yet, so we cannot directly map the socket id to the container
indices which has been happening previously.
To solve this issue we have promoted the AT_CellularStac::find_socket_index(...) method
to be a protected method rather than being private so that the children
can use the method to determine if the given index in the container
corrsponds to the assigned socket id or not.
We have given up on the socket->created flag and the whole decision
making to actually open a socket on the modem happens on the basis of a
valid socket being assigned or not.
- Adjust memory for SoftDevice
- Enable PRIO=5 for interrupt priority check
- Change NRF_SD_BLE_API_VERSION to 6
- Add handle and buffer for advertising and scanning
- Remove guard for phy update
- Change scatter files and mbed_lib.json for PR #8607
Musca-A1 is a Cortex-M33 based target with security extension enabled.
- ARM_MUSCA_A1 is the non-secure target running mbed-os.
- ARM_MUSCA_A1_S is the secure target running TF-M.
- TF-M sources were imported and patched in previous commits.
- TF-M secure bootloader (McuBoot) for MUSCA_A1 is submitted by a pre-built binary.
- A post-build hook concatenates The secure and non-secure binaries,
signs it and then concatenates the bootloader with the signed binary.
Update BatterService and HealthThermometerService to use
up-to-date BLE APIs.
Note: HealthThermometerService::updateTemperature() will
not check GAP connection which should be taken care of by
the caller.
due to partial implementation. Having FUTURE_SEQUANA_M0 and
FUTURE_SEQUANA PSA targets is misleading.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Make sn_coap_protocol_linked_list_duplication_info_remove API to public. User might want to delete some messages from the duplicate list.
Enable support for unified client configuration.
Antti Kauppila
Lingkai Dong
Jaeden Amero
Martin Kojtal
Vincent Coubard
Mirela Chirica
Ari Parkkila
Teppo Järvelin
Kevin Bracey
k-stachowiak
Tomasz Moń
paul-szczepanek-arm
Tymoteusz Bloch
Bilal Qamar
Hasnain Virk
RFulchiero
Desmond Chen
George Beckstein
Oren Cohen
Michael Schwarcz
Daniel Lee
Devaraj Ranganna
Arto Kinnunen
Antti Yli-Tokola
Andrew Chong
Anna Bridge
Mika Leppänen
Kimmo Vaisanen
Pekka Pesu
kevin.ong