72ea613a12
Nuvoton: Add i2c_free
...
1. Disable interrupt
2. Disable IP clock
3. Free up pins
Support targets:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
- NUMAKER_PFM_M487/NUMAKER_IOT_M487
- NU_PFM_M2351*
- NUMAKER_IOT_M263A
- NUMAKER_M252KG
2019-10-31 15:22:57 +08:00
3abd02614a
Nuvoton: Add analogin_free
...
1. Deal with channel-wise and module-wise
2. Disable IP clock
3. Free up pin
Support targets:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
- NUMAKER_PFM_M487/NUMAKER_IOT_M487
- NU_PFM_M2351*
- NUMAKER_IOT_M263A
- NUMAKER_M252KG
2019-10-31 15:19:15 +08:00
4cd0332ada
NUVOTON: Re-implement TRNG HAL with TRNG H/W
...
Targets supporting TRNG H/W:
- NU_PFM_M2351_*
- NUMAKER_IOT_M263A
2019-10-24 10:55:03 +08:00
3f9ba9e61f
NUVOTON: Fix BSP/MKROM header
...
Related targets:
- NU_PFM_M2351_*
- NUMAKER_IOT_M263A
2019-10-24 09:36:25 +08:00
d993c5a108
NUVOTON: Re-implement __PC() with toolchain built-in
...
Re-implement __PC() by replacing BSP assembly with toolchain built-in.
2019-10-24 09:36:25 +08:00
254866eac1
M263: Remove redundant SPI I2S pins from pinmap
...
The pins suffixed with 'I2SMCLK' are for SPI I2S and cannot be used in normal SPI.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi.
2019-08-30 11:33:56 +08:00
c67a0d8bd0
M263: Free up peripheral pins in peripheral free-up HAL API
...
Without free-up of peripheral pins, peripheral pins of the same peripheral may
share by multiple ports after port iteration, and this peripheral may fail with
pin interference.
2019-08-30 11:33:55 +08:00
78ae1e0c73
M263: Support GPIO input pull-high/pull-low
...
In Nuvoton, only new-design chips support GPIO input pull-high/pull-low modes.
Targets not supporting this feature are listed below:
- NUMAKER_PFM_NANO130
- NUMAKER_PFM_NUC472
- NUMAKER_PFM_M453
2019-08-30 11:33:54 +08:00
5b7beab9da
M263: Fix redundant call to UART IRQ handler
...
Honor RxIrq/TxIrq to avoid redundant call to UART IRQ handler.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-uart.
2019-08-30 11:33:52 +08:00
eb435b7da0
M263: Fix redundant SPI clock generation
...
Fix SPI clocks are generated redundantly at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-spi/
SPI - async mode.
2019-08-30 11:33:51 +08:00
d15abe5171
M263: Fix I2C NACK error
...
Fix logic error on replying NACK at the end of transfer.
This is also to fix FPGA CI test mbed_hal_fpga_ci_test_shield-i2c/
i2c - test single byte read i2c API.
2019-08-30 11:33:49 +08:00
9d4d99cf34
M263: Fix IP initialization sequence
...
Better IP initialization sequence:
1. Configure IP pins
2. Select IP clock source and then enable it
3. Reset the IP (SYS_ResetModule)
NOTE1: IP reset takes effect regardless of IP clock. So it doesn't matter if
IP clock enable is before IP reset.
NOTE2: Non-configured pins may disturb IP's state, so IP pinout first and then
IP reset.
NOTE3: IP reset at the end of IP initialization sequence can cover unexpected
situation.
2019-08-30 11:33:48 +08:00
9aa69d03bf
M263: Exclude USB UART from testing
...
USB UART is dedicated to USB COM and so must exclude from FPGA CI testing.
2019-08-30 11:33:47 +08:00
3cb95a8baf
M263: Force enum PinName to 32-bit
...
NU_PINNAME_BIND(...) requires enum PinName to be 32-bit to encode module
binding information in it.
2019-08-30 11:33:45 +08:00
e57ed04252
modify acceptable license term of SDK drivres
2019-08-23 18:12:23 +08:00
23267ba229
re-license files of M261 device folder to be Apache
2019-08-23 18:12:19 +08:00
9d653af2cc
re-license all of M261 hal files to be Apache
2019-08-23 18:12:16 +08:00
c9006bd422
Support InterruptIn class in ci-test/pwm_rise_fall test case
2019-08-23 18:12:13 +08:00
d69e7c5613
Fix UNO pin map
2019-08-23 18:12:11 +08:00
3164095cd6
M263: Fix channel release in analogout_free()
2019-08-23 18:12:10 +08:00
a62c877d0e
M263: modify epwm-config-output
2019-08-23 18:12:09 +08:00
2596b7c7be
M263: Include cmsis core_m23.h for macro __CORTEX_M in M261.h
2019-08-23 18:12:07 +08:00
d52fced891
M263: Fix compile error on analogin/out & crypto-misc
2019-08-23 18:12:06 +08:00
b9a2e06a1a
M263: delete 2 redundant files
2019-08-23 18:12:04 +08:00
e46cf83850
M263: Add Numaker-IoT-M263A target board
2019-08-23 18:12:02 +08:00
Chun-Chieh Li
cyliangtw