* Using PinName as bitfield doesn't work without warnings, since NC
needs all 32 bits to be represented.
* lp_ticker should not be freed when interrupt is disabled, since this
will kill the timebase.
According to the C99 specification "The value (time_t)(-1) is returned if the
calendar time is not available". Before this patch, in such case the function
was returning 0 instead of -1.
The use of mktime was causing a fault when called in interrupt handler because on GCC it lock the mutex protecting the environment, To overcome this issue, this patch add dedicated routine to convert a time_t into a tm and vice versa.
In the process mktime has been optimized and is now an order of magnitude faster than the routines present in the C library.
The Ameba RTC driver converts time_t to
second/minute/hour/day/month/year in rtc_write and back to time_t in
rtc_read. Replace this with an implementation which uses time_t
directly.
Add MBED_APP_START and MBED_APP_SIZE to the linker scripts
so the start and size of an image can be specified. This allows the
ROM to be split into a bootloader region and an application region.
Fix vector table
The address of the vector table is hardcoded to the start of flash.
This patch updates make it properly handle updating the VTOR with
a bootloader.
The semaphore xTXDCountSem had the count to match the number of
resources available, but was being used as a binary semaphore in a
loop to listen for events. This patch updates the logic to make use of
the resource count.
With RTX5 the OS traps with an error if the a semaphore is released
more times than its count with an error similar to
"Semaphore 10000e6c error -17". Because xTXDCountSem is being used
as a binary semaphore it triggered this trap. With this patch the
semaphore is no longer used as a binary semaphore and no longer traps.
Should be kept in sync with doxygen_options.json which is used for
building the doxygen which is used by docs.mbed.com It is intended
only generate doxygen for specific directories which present the
public APIs for mbed OS
When initializing the RTC on Kinetis devices, handle the case where
the time overflow interrupt is pending and the case where the time
alarm flag is pending. These flags persist across reset and if not
handled will cause a crash when powering up the low power ticker.
This problem manifested as a lp_ticker test failure on the K22F and
K64F on CI only when running a nightly. This problem has been present
but was made obvious by PR #4094 which configures all tickers to
interrupt at least every MBED_TICKER_INTERRUPT_TIMESTAMP_MAX_DELTA
(~31 minutes). This caused the RTC alarm to fire 31 minutes after the lp_ticker
or lp_timeout test and caused the next run of the lp_ticker test to
crash on boot.
Reworked the serial_format() function for STM32F0x
devices to take the format in the form:
data_bits - parity - stop_bits
E.g. 8 - N - 1
where data_bits exclude the parity bit.
Added a case for 7 bits data as at least the chips
STM32F0x1/STM32F0x2/STM32F0x8 support 7 bits data.
Consolidated serial_format() and uart_init()
functions into a general TARGET_STM serial_api.c
file since the functions are common to all STM targets.
Fixes#4189
For STM32 targets using a 32-bit timer for the microsecond ticker, the
driver did not properly handle timestamps that are in the past. It
would just blindly set the compare register to the requested timestamp,
resulting in the interrupt being serviced up to 4295 seconds late
(i.e. after the 32-bit timer counts all the way around to hit the
timestamp again).
This problem can easily be reproduced by creating a Timeout object
then calling the timeout's attach_us() member function to attach a
callback with a timeout of 0 us. The callback will not get called for
over 2147 seconds, and possibly up to 4295 seconds late if no other
microsecond ticker events are getting scheduled in the meantime.
Now, after the compare register has been set, the timestamp is checked
against the current time to see if the timestamp is in the past, and
if so, the compare event is manually set.
NOTE: By checking if the timestamp is in the past after configuring the
capture register, we ensure proper handling in the case where the timer
updates past the timestamp while setting the capture register.
TimMasterHandle.Instance initialization can be removed from here,
because it will either have been already done previously,
or it will be done in the us_ticker_init() call immediately below.
Andreas Larsson
Martin Kojtal
Aksel Skauge Mellbye
Vincent Coubard
Jimmy Brisson
Andrzej Puzdrowski
kl-cruz
Steven Cooreman
Sam Grove
Russ Butler
Seppo Takalo
Laurent MEUNIER
Kevin Gilbert
Francisco J. Manno
Bradley Scott
arostm