f552f9db24
Merge pull request #10146 from kjbracey-arm/CellularInterface_tidy
...
CellularBase -> CellularInterface tidy
2019-03-29 10:22:32 -05:00
a744343931
STM32WB: disable debug lines when not needed
...
When doing so, do not disbale GPIO clocks as they may be used by other
drivers !
As a result, debug will be disabled by default, but can be enabled by
either modifying code or selecting MBED debug profile.
2019-03-29 16:21:46 +01:00
6336e4bee7
STM32WB: Handle re-init case of transport layer
...
Issue was seen when running BLE_GAP example from
mbed-os-example-ble.
In STM32WB, the M0 core cannot be reset except if the whole target
is reset. So in case of re-initialization of the BLE stack, the
transport layer should not be initialized again. The HCI reset
command will do the job.
2019-03-29 16:21:44 +01:00
c72b0e7ca4
STM32WB: fix some styling in HCI driver
2019-03-29 16:21:44 +01:00
9b2acb25a3
STM32WB: handle extended reset
...
as suggested during review, apply same sequence as in:
b96c0ac986
2019-03-29 16:21:44 +01:00
fd6f12f8a4
STM32WB: move HCI driver to target specific folder
...
Need to move stm32wb_HCIDriver.cpp to target specific folder otherwise
it could mess up with other STM targets.
2019-03-29 16:21:44 +01:00
6caa4d487f
STM32WB: Add SPDX identifier to new files
...
also update the copyright year when needed
2019-03-29 16:21:44 +01:00
740e296f6b
STM32WB: fix compilation issue with ARMC6
2019-03-29 16:21:43 +01:00
3ebf7c9db3
STM32WB: remove duplicate file
2019-03-29 16:21:43 +01:00
c53021b77f
STM32WB: Update headers
2019-03-29 16:21:43 +01:00
e925bd711b
STM32WB: Set a random static address during init
2019-03-29 16:21:42 +01:00
08965e1190
STM32WB: add debug trace group in BLE Transport Layer
2019-03-29 16:21:42 +01:00
5871a712dc
STM32WB: Move STM32WB utilies from FEATURE_BLE to targets folder
...
These files are not BLE specific, but also needed for some clock setting
for instance.
In order to compile an MBED2 application, we need to move the files.
2019-03-29 16:21:40 +01:00
27e7e4d9df
NUCLEO_WB55RG: Rework Clock and sleep support
...
- move hw_conf.h file to targets/TARGET_STM/TARGET_STM32WB directory as
this is used also out of BLE feature.
- create a dedicated hal_deepsleep function as the behavior in WB is a lot
different from other existing STM32 targets
- update clock tree configuration to directly clock the entire tree @ 32MHz
out of HSE. This is needed as we want to let the M0 core running without
any change on M0-side of clocks when M4 enters /exits deep sleep.
2019-03-29 16:21:40 +01:00
6234b3578c
NUCLEO_WB55RG: add Cordio HCI and Transport Layer driver
...
The STM32WB Coridio driver includes:
- the Cordio HCI driver handling the reset sequence. During reset sequence
the TX POWER level is set and the BD address is defined if found in OTP
or option bytes. The rest of the sequence is based on the standard CORDIO
HCI driver example.
- The Transport Layer part handles sending and receiving messages to the
WB controller running on cortex-M0 of the STM32WB target. The messages
are shared through shared memory and mailboxes system based on IPCC HW.
2019-03-29 16:21:39 +01:00
16ed1097aa
NUCLEO_WB55RG: WB Transport Layer Cube files modifications
...
- Need to force ARM packed redefinition
- Configure LL stack in LL mode only
- Remove warning in shci_tl.c (PLACE_IN_SECTION)
2019-03-29 16:21:39 +01:00
e8a49e9605
NUCLEO_WB55RG: add WB Cube files reused for BLE transport layer
2019-03-29 16:21:39 +01:00
9c381f27ec
Merge pull request #10243 from michalpasztamobica/nanostack_bringdown_blocking
...
Nanostack::EthernetInterface::bringdown() can handle blocking mode
2019-03-29 10:20:47 -05:00
eef1b4868d
Merge pull request #10094 from desmond-blue/fix_ble_gattserver_autorization_list
...
BLE: Fix ble gattserver autorization list registration
2019-03-29 10:11:50 -05:00
1c35b95d89
Merge pull request #10072 from nick-atmosphereiot/master
...
Adding variable length attributes to Maxim Feather
2019-03-29 10:10:21 -05:00
bd74cb2ab7
Removed function calls from mbed_assert, which caused the functions to be ignored in release mode
2019-03-29 09:47:28 +01:00
4af3c38078
Merge pull request #10210 from jarvte/cellulardevice_from_context
...
Cellular: CellularContext must provide access to CellularDevice
2019-03-28 17:09:48 -05:00
716beb96ad
Merge pull request #10214 from hasnainvirk/rx_metadata_toa
...
LoRaWAN: Adding TOA and Channel info in RX metadata
2019-03-28 17:07:39 -05:00
cd8d362899
Merge pull request #10231 from artokin/nanostack_armc6_update
...
Nanostack ARMC6 update
2019-03-28 17:07:32 -05:00
48c78ae79a
Merge pull request #9971 from KariHaapalehto/status_callback
...
Correct thread status callback functionality
2019-03-28 17:05:34 -05:00
732dd36c90
Remove FEATURE_STORAGE and all underlying deprecated features
2019-03-28 23:10:05 +02:00
d3d0622ac8
Merge pull request #10230 from u-blox/cellular_network_test
...
Cellular: cellular_network_test Compilation Error Removed
2019-03-27 17:07:32 -05:00
4cdc3b7cb8
Merge pull request #10219 from paul-szczepanek-arm/fix-legacy-scan-timeout
...
BLE: fix scan timeout being called from interrupt
2019-03-27 13:35:06 -05:00
ccc83f7e3b
Nanostack::EthernetInterface::bringdown() can handle blocking mode
...
This let the tests-network-interface test pass for nanostack.
2019-03-27 16:34:46 +02:00
8fd791db49
Adding TOA and Channel info in RX metadata
...
We provide now downlink channel frequency and time on air for the
received frame in the RX metadata.
Previously the channel information in both TX and RX metada contained
the index number of the channel. That information wasn't very useful
except the index numbers of default channels. To make more sense of the
meta data, we now store the channel frequency in the channel parameter
rather than the index number of the channel.
RX time on air is collected from the radio driver and it is assumed that
the downlink frame had 8 downlink preamble symbols (plus 4.25 of the
preambles added by the chip) for LoRa modulation.
This commit also include a bit of tidying of RX frequency storage in rx
configuration parameters storage. Previously we were missing filling in
the RX1 frequency correctly.
2019-03-27 10:23:43 +02:00
2520c77e75
Merge pull request #10110 from theamirocohen/improve_gen_bd_tests
...
Improve genenral BlockDevice tests
2019-03-27 00:34:19 -05:00
a0a265ad84
Merge pull request #10196 from hasnainvirk/premature_rx2_fix
...
LoRaWAN: Fixing premature RX2 closure
2019-03-27 00:26:12 -05:00
365cf1143e
Merge pull request #10162 from pan-/cordio-driver-notify-inactivity
...
BLE - Notify HCI driver of host stack inactivity
2019-03-27 00:26:02 -05:00
e8e6ad4a06
Merge pull request #10190 from tymoteuszblochmobica/fixtcp
...
Fixed compilation error in LWIPStack class if lwip tcp is disabled.
2019-03-27 00:23:37 -05:00
eff15804b7
Merge pull request #10154 from itziardelatorre/itziar
...
Fix for LoRaWAN downlink sequence counter rollover
2019-03-27 00:22:37 -05:00
82112b6c52
simplify call
2019-03-26 10:53:10 -05:00
de539e146b
update comments
2019-03-26 10:53:10 -05:00
dad6844167
bounce scan timeout of the queue
2019-03-26 10:53:10 -05:00
71e5a1d2e7
cellular_network_test compilation error removed
2019-03-26 18:04:42 +05:00
ba6748fe41
Improve general Block Device tests
...
Fixing all rand issues, aligning erase addresses, moving prints to debug mode.
2019-03-26 14:49:57 +02:00
0ed71541c5
power on wait increased for C030_U201
2019-03-26 17:06:05 +05:00
adedd05139
Fix compiler warnings in Nanostack HAL
...
Fix compiler warnings:
-"warning: 'size' argument to memset is '0'"
-"warning: implicit declaration of function"
2019-03-26 13:19:33 +02:00
f348325dbd
Squashed 'features/nanostack/coap-service/' changes from 227cc3d..086e7ba
...
086e7ba Adjust variable scope (#121 )
git-subtree-dir: features/nanostack/coap-service
git-subtree-split: 086e7ba8a1afdcfe3df16ae92ef28cae1af5a4a6
2019-03-26 13:19:18 +02:00
b0ee22c96b
Cellular: CellularContext must provide access to CellularDevice
...
When using NetworkInterface::get_default_instance() application gets handle
to CellularInterface which is actually CellularContext derived from CellularInterface.
Application needs also handle to CellularDevice to open other interfaces.
2019-03-26 07:29:11 +02:00
ac118eaedc
Merge pull request #10164 from Patater/tls-2.17.0
...
tls: Update Mbed TLS to 2.17.0
2019-03-23 16:33:52 +01:00
f6fc71c501
Merge pull request #10152 from Patater/crypto-1.0.0
...
crypto: Update Mbed Crypto to 1.0.0
2019-03-23 16:33:32 +01:00
2691b83c4e
Fixing premature RX2 abort
...
A bug while setting up RX start timers would result in premature closusre
of RX2 window. The 'ack_Timeout_timer' would be invoked prematurely and
at that time RX2 window may be being demodulating. This resulted in
massive instability with any test that relied on Confirmed traffic or
lower data rates.
To fix the issue, we must know the length of the RX window in
milliseconds and for this purpose we have extended the
'get_rx_window_params(...)' API. The length of the time the window
may remain open must be accounted for while setting up
'ack_timeout_timer'.
2019-03-22 15:15:51 +02:00
2618813c70
Ack timeout must be at least 2 seconds
...
While calculating ack timeout, we were ending up getting a random value
which may become less than 2 seconds. This is not allowed as per v1.0.2
specification.
To fix the issue we now take the random number from 0 to 2000 ms and
then add that to the fixed 2000 ms ack timeout value, guaranteeing a
value at least equal to 2000 ms.
2019-03-22 15:15:51 +02:00
1d8c3d4553
Merge pull request #10179 from u-blox/n2xx_provide_default
...
Cellular: C030_N2XX default interface
2019-03-22 06:33:24 +01:00
e7a4658256
Merge pull request #10180 from AriParkkila/fix-wise-1570
...
Fix SPIF speed for MTB_ADV_WISE_1570 and max packet size for BC95
2019-03-22 06:32:39 +01:00
646c925d60
Fixed compilation error in LWIPStack class if lwip tcp is disabled.
2019-03-21 17:58:31 +01:00
014a5ec487
Merge pull request #10172 from kivaisan/fix_plmn_iar_trace
...
Cellular: Fix plmn trace for IAR
2019-03-21 10:05:20 +01:00
bdd07b6a37
Cellular: Fix max packet size for BC95 driver
2019-03-21 01:11:28 -07:00
2f37e371b4
C030_N2XX default interface
2019-03-21 11:57:32 +05:00
839e977bee
Merge pull request #10138 from jarvte/athandler_filehandle_not_usable
...
Cellular: don't allow ATHandler read/write if filehandle not usable
2019-03-20 15:39:12 +01:00
06caa0ff14
Cellular: Fix plmn trace for IAR
...
IAR compiler does not seem to like printing null strings.
2019-03-20 14:39:07 +02:00
23cd1aa083
Merge pull request #10140 from jarvte/astyle_fixes
...
Cellular: fix astyle for files that already in master
2019-03-20 13:24:23 +01:00
c6d3d8326e
Merge pull request #10005 from TeemuKultala/cellular_remove_device
...
cellular: remove last CELLULAR_DEVICE references
2019-03-20 13:18:23 +01:00
9ad90691a3
CellularBase -> CellularInterface tidy
...
Remove remaining references to deprecated CellularBase in code, avoiding
one warning.
Add deprecation to Doxygen.
2019-03-20 10:12:14 +02:00
20598bcea1
tls: Update Mbed TLS to 2.17.0
...
There are no differences from the previously imported version of Mbed
TLS other than the version number.
2019-03-19 16:55:56 +00:00
339c57f6a7
BLE - Use low power timeout in cordio::BLE::callDispatcher .
2019-03-19 16:26:29 +00:00
63b7e69d89
BLE - Signal to the HCI driver when the host stack is inactive
2019-03-19 16:25:24 +00:00
7ee811141b
BLE - Add CordioHCIDriver::on_host_stack_inactivity
...
This callback should be called by the host stack when it has no pending activities. It allows a driver to put its controller to sleep.
2019-03-19 16:08:04 +00:00
4c1fedd72a
Applied suggested astyle fix(es)
2019-03-19 10:11:15 +01:00
5beef7405c
Bug related to downlink sequence counter rollover
2019-03-19 10:11:14 +01:00
54602f55ba
Merge pull request #10108 from theamirocohen/fix_is_valid_erase
...
Fix functionality for FlashIAPBD & SlicingBD
2019-03-19 09:31:33 +01:00
11ef5a0a72
crypto: Update Mbed Crypto to 1.0.0
...
There are no differences from Mbed Crypto 1.0.0d7 other than the version
number.
2019-03-18 16:17:02 +00:00
de7520bd97
Cellular: fix astyle for files that already in master
2019-03-18 13:50:10 +02:00
174d95709c
Cellular: don't allow ATHandler read/write if filehandle not usable
...
For example after going to ppp mode we must block at write and
read as filehandle is not usable.
2019-03-18 13:37:48 +02:00
6b84b14ab6
Merge pull request #10081 from jarvte/move_call_CGEREP
...
Cellular: call AT+CGEREP after sim is ready
2019-03-18 11:26:41 +01:00
614b014d05
cellular: remove last CELLULAR_DEVICE references
2019-03-18 10:07:30 +02:00
964f5ad321
Merge pull request #10098 from ghseb/credentials-for-connection-profile
...
Cinterion Cellular: Setup connection profile with username and password
2019-03-18 08:13:32 +01:00
4cf22b39d6
Merge pull request #10029 from AriParkkila/cellular-device_serial
...
Cellular: Remove compile dependency of UARTSerial
2019-03-18 08:12:27 +01:00
dba3d42362
Cellular: call AT+CGEREP after sim is ready
...
Current implementation did call AT+CGEREP before sim was ready
and it was failing in most modems.
2019-03-18 08:10:09 +02:00
05f18fc7f6
Merge pull request #10100 from ghseb/support-ehs5-e
...
Cellular: Support Cinterion EHS5-E cellular module
2019-03-16 23:00:51 -05:00
c81a292921
Merge pull request #10092 from desmond-blue/fix-ble-on_phy_update_complete
...
BLE:fix on_phy_update_complete function
2019-03-16 23:00:37 -05:00
6c4b4a5212
Merge pull request #10084 from mirelachirica/info_resp_issue_8829
...
Cellular: AT information response to return false on empty prefix
2019-03-16 22:59:24 -05:00
b433b16a11
Merge pull request #10014 from artokin/nanostack_interface_error_mapping
...
Update nanostack-interface error mapping
2019-03-16 22:58:24 -05:00
9ecde429f9
Merge pull request #9992 from pan-/ble-use-low-power-ticker
...
BLE - Use low power timing primitives
2019-03-16 22:56:43 -05:00
961c9e2e13
Merge pull request #9988 from paul-szczepanek-arm/fix-cordio-tick
...
BLE: fix tick rate set to 10 ms
2019-03-16 22:56:24 -05:00
e697d3770d
Merge pull request #9935 from jarvte/lwip_timeout_bringup_link
...
Increased timeout for lwip waiting netif_is_link_up
2019-03-16 22:54:57 -05:00
7fa995860f
Merge pull request #9921 from desmond-blue/fix_Cordio-insert-characteristic-handle-error
...
BLE:Cordio:Fix insert characteristic not handle error
2019-03-16 22:54:37 -05:00
7cdc5b057c
Merge pull request #9919 from pan-/workaround-extended-report
...
BLE - Report extended advertising in legacy handler
2019-03-16 22:54:21 -05:00
dbb33ef423
Merge pull request #9801 from vmedcy/fix-eventqueue-h
...
Correctly include EventQueue.h
2019-03-16 22:52:40 -05:00
eb5cef84fd
Add bootloader support for the LPC55S69 board
...
bla
2019-03-16 00:13:40 +02:00
78a3d99c81
Merge pull request #9941 from marcuschangarm/fix-rspif
...
Add missing RSPIF component to the defaut BlockDevice handler
2019-03-15 18:08:04 +01:00
686095e213
Merge branch 'remove_no_greentea' of https://github.com/kfnta/mbed-os into rollup
2019-03-15 08:46:14 +00:00
4cf7864bb5
Merge branch 'wisun_network_default_name' of https://github.com/artokin/mbed-os into rollup
2019-03-15 08:45:57 +00:00
4a24bd1f0a
Merge branch 'fix_lwip_debug_log_compile' of https://github.com/jarvte/mbed-os into rollup
2019-03-15 08:45:26 +00:00
759627ff12
Merge branch 'plmn_stm_fix2' of https://github.com/jarvte/mbed-os into rollup
2019-03-15 08:45:14 +00:00
74f13dd8de
Merge branch 'fix_Cordio-descriptor-set-cback' of https://github.com/desmond-blue/mbed-os into rollup
2019-03-15 08:44:55 +00:00
0597e33765
Merge branch 'patch-9' of https://github.com/janjongboom/mbed-os into rollup
2019-03-15 08:44:40 +00:00
9960ea93ed
Merge branch 'fix-ble-cordio-reset-sequence' of https://github.com/desmond-blue/mbed-os into rollup
2019-03-15 08:43:59 +00:00
744e648673
Disable dual stack mode for ehs5-e
2019-03-15 09:32:26 +01:00
6b7b36a3b4
Revert "Disable dual stack mode"
...
This reverts commit 8611474e6c
2019-03-15 09:31:49 +01:00
8611474e6c
Disable dual stack mode
2019-03-15 09:26:43 +01:00
2c3c14c52b
Fix registration modes and disable CGSN with type
2019-03-15 09:00:56 +01:00
0e37fc206c
Merge pull request #10097 from 0xc0170/rollup
...
Rollup PRs: simple fixes
2019-03-15 08:04:29 +01:00
196a7666fe
BLE:Fix gattserver authorization list update permission check
2019-03-15 12:11:12 +08:00
08617098d6
Merge pull request #10088 from avolinski/master
...
Temporary disable Crypto HW accelerator on UBLOX_EVK_ODIN_W2
2019-03-14 21:43:59 -05:00
d53ff0b3c4
Merge pull request #10101 from kfnta/nxp_reduce_its
...
LPC55S69_S: reduce ITS size to 32KB
2019-03-14 13:22:47 -05:00
7fac0722a4
Fix functionality for FlashIAPBD & SlicingBD
...
Due to discovery of inconsistent sector sizes in devices storage the is_valid_erase function was adjusted,
For FlashIAPBD the 'code size' was included to the calculation, preventing faulty "virtual" addresses calculation.
For SlicingBD the same error was fixed and in all 3 validation functions that sent addresses for validation and program/read/erase
different addresses.
2019-03-14 17:46:10 +02:00
f976ce3c18
Temporary disable Crypto HW accelerator on STM32F439xI chipset due to issue: https://github.com/ARMmbed/mbed-os/issues/10095
2019-03-14 17:00:06 +02:00
dca3ebe9f6
LPC55S69_S: reduce ITS size to 32KB
...
- Reduce LPC55S69 secure side ITS from 64KB to 32KB
2019-03-14 15:49:44 +02:00
febcea00f3
Support Cinterion EHS5-E cellular module
2019-03-14 13:50:10 +01:00
0880f90d48
Updating CY8CKIT_062_WIFI_BT_PSA bootloader image
2019-03-14 14:26:23 +02:00
2fd7dc9b8d
Update features/FEATURE_BOOTLOADER/targets/TARGET_Cypress/TARGET_PSOC6/TARGET_CY8CKIT_062_WIFI_BT_PSA/mbed_lib.json
...
Co-Authored-By: yossi2le <yossi.levy@arm.com>
2019-03-14 14:26:23 +02:00
dd27a3400b
mbed-os to support bootlader for Cypress CY8CKIT_062_WIFI_BT_PSA and CY8CKIT_062_BLE
2019-03-14 14:26:23 +02:00
b80c961dae
Merge pull request #10034 from evgenibo/flash_protected_region_config
...
PSA: PSoc 6 configurable secure memory size
2019-03-14 13:23:58 +01:00
5252163534
Merge pull request #9900 from michalpasztamobica/dns_async_handle_would_block
...
DNS send returning WOULD_BLOCK forces delayed retry
2019-03-14 13:01:20 +01:00
8b94f3b2ff
Merge branch 'patch-7' of https://github.com/janjongboom/mbed-os into rollup
2019-03-14 11:37:26 +00:00
d5eb98e66a
Merge branch 'cellular_BC95_leak_fix' of https://github.com/TeemuKultala/mbed-os into rollup
2019-03-14 11:37:10 +00:00
4df969fc2c
Merge branch 'tr-debug-cell' of https://github.com/sarahmarshy/mbed-os into rollup
2019-03-14 11:36:59 +00:00
ee17c7c996
Setup connection profile with username and password
2019-03-14 12:03:12 +01:00
c0bc56737b
modify rpb base address for M0
2019-03-14 11:29:46 +02:00
fc97a75632
Remove #ifndef NO_GREENTEA from tests
2019-03-14 11:16:44 +02:00
ab0bc65e0d
Merge pull request #9873 from wajahat-ublox/udnsrn_timeout
...
Corrected timeout for +UDNSRN command
2019-03-14 09:38:20 +01:00
c0c02e2bd8
Merge pull request #9872 from KariHaapalehto/burst_nonblock_test_fix
...
Fix for NUCLEO_F207 UDPSOCKET_ECHOTEST_BURST_NONBLOCK fails.
2019-03-14 09:16:59 +01:00
cf76b74aad
Merge pull request #9837 from jarvte/drop_bg96_cgact_support
...
Cellular: CGACT not supported in coming firmware in BG96
2019-03-14 09:16:39 +01:00
76fe7267e7
Merge pull request #9637 from u-blox/C030_N211_Cellular_Driver
...
Cellular: UBLOX_C030_N211 Cellular API's
2019-03-14 09:11:06 +01:00
a70f0e6780
BLE:Fix cordio reset sequence
2019-03-14 15:41:10 +08:00
a6df7b2bd7
BLE:fix on_phy_update_complete function
2019-03-14 11:42:03 +08:00
f6ab217892
Reduce 32KB from LPC55S69_S binary size
2019-03-13 18:21:37 +02:00
d12de2a199
Cellular: AT information response to return false on empty prefix
2019-03-13 15:49:33 +02:00
44c5c7ef5a
Formatting fix
2019-03-13 07:58:24 -04:00
903a6f2e7e
Cellular: Remove compile dependency of UARTSerial
2019-03-12 23:57:43 -07:00
e08b200eef
Adding variable length attributes to Maxim Feather
2019-03-12 18:49:45 -04:00
d9448364da
Correct thread status callback functionality.
...
At the start-up, there was 2 NSAPI_STATUS_CONNECTING callbacks,
so extra one removed from ThreadInterface.cpp.
At the network lost case, there was NSAPI_STATUS_DISCONNECTED and
NSAPI_STATUS_LOCAL_UP callbacks. NSAPI_STATUS_DISCONNECTED has been removed,
since the NSAPI_STATUS_LOCAL_UP is enought.
2019-03-12 13:13:55 +02:00
84e4decad0
Merge pull request #10042 from paul-szczepanek-arm/fix-pal-paths
...
BLE: fix conflicting include by qualifying cordio pal includes
2019-03-12 08:26:53 +01:00
053e07b6dc
change the include to mbedtls/config.h
2019-03-11 19:03:08 +02:00
abb2942fc5
qualify cordio pal includes
2019-03-11 16:52:40 +00:00
ee056daf86
DNS recv/send returning WOULD_BLOCK force delayed retry
2019-03-11 13:33:06 +02:00
774294d1e2
Merge pull request #10012 from donatieng/ublox_odin_w2_static_random_addr
...
Generate BLE Static Random Address on U-blox Odin-W2 platform
2019-03-09 17:40:21 +01:00
ae45096ce6
Fix undefined tr_debug for QUECTEL_BG96 cellular feature
2019-03-08 11:22:11 -06:00
f0d7e205ff
Update nanostack-interface error mapping
...
Use status NSAPI_ERROR_PARAMETER instead of NSAPI_ERROR_UNSUPPORTED
when error is caused by parameter.
2019-03-08 16:28:20 +02:00
c607b8ab1a
LPC55S69: Update the KVStore config files
...
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-03-08 07:33:47 -06:00
041d53de25
Generate BLE Random Static Address on U-blox Odin-W2 platform
2019-03-08 12:50:08 +00:00
b19fa515a6
Merge pull request #9982 from artokin/nanostack_update_for_mbedos_512
...
Nanostack update for Mbed OS 5.12
2019-03-08 12:05:00 +01:00
820a2e284d
Merge pull request #9908 from morser499/pr/cy-mbed-os-5.12.0
...
Pr/cy mbed os 5.12.0
2019-03-08 11:01:41 +01:00
57ec1d57b9
Merge pull request #9990 from kfnta/sync_complinace_test_to_latest
...
Sync PSA compliance test to latest version
2019-03-07 23:36:56 -06:00
b183ba1d01
BLE - Use LowPower Ticker and Timer for address rotation and scan timeout.
2019-03-07 16:49:58 +00:00
a105db38ce
BLE - Use LowPowerTimer instead of Timer in the Cordio stack.
2019-03-07 16:45:46 +00:00
0cce5d53b8
PSOC6 deep-sleep changes
...
- Enable add MBED_TICKLESS in targets/targets.json
- BLE : deep-sleep aware HCI transport driver
- WIFI: deep-sleep aware driver
- Rebuild WICED libraries with Low Power changes
2019-03-07 08:40:20 -08:00
aedec74b9a
Added support for PSA target to WIFI_BT board
...
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
2019-03-07 08:40:20 -08:00
ff78bc4b7c
Merge pull request #9973 from kfnta/tfm_num_threads
...
TF-M config: Add max_ns_thread_count parameter
2019-03-07 10:28:11 -06:00
42d3a58d66
change tick rate to 1 ms
2019-03-07 16:07:25 +00:00
c99f03d0ce
add mbed_lib.json to prevent inclusion in bare-metal builds
2019-03-07 18:04:59 +02:00
517bb1a64a
remove sid.h as it is now supplied by PSA
2019-03-07 18:04:27 +02:00
a772d9d327
add comment explaining attestation keys for test use
2019-03-07 17:50:54 +02:00
a5c6d423bc
tsi/main.cpp is using wrong `printf` format
...
`%` needs to be escaped as well.
2019-03-07 16:36:29 +01:00
Cruz Monrreal
Laurent Meunier
bcostm
Marc Emmers
David Saada
Michal Paszta
Hasnain Virk
paul-szczepanek-arm
mudassar-ublox
Amir Cohen
Arto Kinnunen
Teppo Järvelin
Martin Kojtal
Tymoteusz Bloch
Ari Parkkila
Kimmo Vaisanen
Kevin Bracey
Jaeden Amero
Vincent Coubard
itziar
Teemu Kultala
Sebastian Stockhammer
Desmond Chen
avolinski
Michael Schwarcz
Yossi Levy
Oren Cohen
Evgeni Bolotin
Mirela Chirica
Nick
Kari Haapalehto
Netanel Gonen
Sarah Marsh
Mahesh Mahadevan
Donatien Garnier
Vivek Pallantla
Oleg Kapshii
Nir Sonnenschein
Jan Jongboom