9af828a11f
Merge branch 'master' of https://github.com/mfiore02/mbed into mfiore02-master
...
Conflicts:
workspace_tools/build_travis.py
2015-01-02 07:12:11 +01:00
5282d1b8a6
Updated README.md to be up date with IAR's target support
2014-12-23 11:50:33 +01:00
79ec104b3c
Merge pull request #801 from bcostm/master
...
Add new target - NUCLEO_F070RB
2014-12-19 09:48:14 +00:00
d9eb8b71d5
[NUCLEO_F070RB]Add new target - part 3 workspace_tools
2014-12-18 09:30:19 +01:00
6ecff6327b
[export] add gcc/uvision templates for BLE Smurfs
2014-12-17 14:51:34 +08:00
604e163cc1
fix gcc/uvision template for Arch BLE
2014-12-17 14:38:09 +08:00
8d2fa50691
add new target BLE_SMURFS
2014-12-17 11:40:09 +08:00
09261bd615
IAR: Fixed language settings in ewp files. Set project setting to allow both c and c++ language and allowed VLA in C code
2014-12-15 14:19:54 +01:00
1fb5426bf6
Merge pull request #793 from ohagendorf/STMF4xxx_rtos
...
DISCO_F4xx, NUCLEO_F4xx, MDOT_F4 - fix RTOS problem (init seq)
2014-12-15 09:01:35 +00:00
f3acd0e7aa
Merge pull request #790 from BlackstoneEngineering/NordicKeilFix
...
Tools: changed device name from nRF51822_xxAA -> nRF51xxx on all Nordic boards
2014-12-15 08:57:38 +00:00
5aafaa0d63
Merge pull request #780 from GustavWi/iar_mbed
...
IAR: skip dynamic initialization, new common IAR startup file
2014-12-15 08:52:35 +00:00
f8962e8683
Merge pull request #768 from mazgch/master
...
add CooCox exporter for C027
2014-12-15 08:44:24 +00:00
6f8f626bd6
[DISCO_F4xx][NUCLEO_F4xx][MDOT_F4] solving RTOS problem
...
- Changing original STM Cube Driver to call _start instead of main to
initialise the rtos when using it. Without using rtos the behavior is
the same as before.
- Adding DISCO_F429 to rtos
- Adding targets to RTOS_xx tests.
- All tests are OK. Tested with Nucleo and Disco boards. Not tested with
MDOT_F4 but that uses the same hal like nucleo_f411.
2014-12-13 22:50:02 +01:00
c6547b96cf
changed device name from nRF51822_xxAA -> nRF51xxx on all Nordic boards. This change is necessary due to a conflict with KeilV4 naming
2014-12-11 19:28:15 -06:00
a749176209
[travis] add MTS_DRAGONFLY_F411RE to build_travis.py
2014-12-11 15:47:21 -06:00
38d92a5ab3
[mbed][workspace_tools] remove comment from targets.py
2014-12-11 14:08:31 -06:00
b1aee00f85
[mbed][MTS_DRAGONFLY_F411RE] change IAR project options to not have Override default checkbox set, change IlinkIcfOverride from 1 to 0 in file iar_mts_dragonfly_f411re.ewp.tmpl
2014-12-11 13:20:45 -06:00
74cc06b3ce
[targets][MTS_DRAGONFLY_F411RE] remove unnecessary comments from Dragonfly entry in targets.py
2014-12-11 13:20:45 -06:00
546005a72c
[mbed][MTS_DRAGONFLY_F411RE] added platform support files and dirs built gcc executable NOT working
2014-12-11 13:20:45 -06:00
bd9b356816
[export][MTS_DRAGONFLY_F411RE] added iar support for DRAGONFLY
2014-12-11 13:19:08 -06:00
b67836d4ba
Added skip dynamic initialization to mts mdot f411re ewp
2014-12-11 09:43:31 +01:00
b75dadac6c
Merge pull request #779 from ndelisi/master
...
Y5Design LPC11U35 and NRF51822 - Add New targets
2014-12-11 08:28:29 +00:00
130c9c282a
Tools: nordic uvision templates - RAM size set to 0x2000 from 0x800
2014-12-10 14:25:11 +00:00
c3393b80b1
Merge remote-tracking branch 'upstream/master' into iar_mbed
2014-12-10 13:41:46 +01:00
3062999e97
Separated the c data initialization and c++ to call mbed_sdk_init before c++ data. So that the c variables are updated before the c++ objects are initialized. Had to rename the cmain override in RTX_CM_lib.h to __iar_program_start because there can not be two __cmain overrides in the project. The ewps had to be updated to add the linker command --skip_dynamic_initialization which stalls the c++ data init until __iar_dynamic_initialization which is called right after mbed_sdk_init.
2014-12-10 13:40:17 +01:00
a03d3bcd8d
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h
...
nRF51822 from Nordic Semiconductor
Bluetooth Low-Energy v4.1 compliant - interface to smartphones, tablets
System-on-Chip (SoC) solution - easily transformable into a deployable solution
Drop-in solution for production - no need to design your own antenna
FCC and CE Certified
3x LEDs, 3x Buttons
Powered by interface board or external 3.3V
2014-12-09 14:08:22 -06:00
f382af4aed
Porting of new target: Added new target to target.py, added header files for PinNames.h and device.h. Added linker library.
...
Y5 Design LLC Interface Board
LPC11u35 from NXP
Low Power, ARM(r) Cortex-M0 suitable for a wide range of applications
On-Chip Bootloader - In-System programming (ISP) and in-application programming (IAP)
ROM-based USB drivers - Flash updates via USB supported
SPI, GPIO, i2C, UART, ADC
3x LEDs, Reset Button
3.3V powered via USB or external
USB interface - shipped with USB-A, male connector, pads for Micro female
2014-12-09 13:01:20 -06:00
2f5cbcb1c6
Add support for mDot with STM32F411RE processor
2014-12-08 10:58:25 -06:00
14f999b1d4
add exporter
2014-12-08 11:14:27 +01:00
a17c1dd8f7
Merge pull request #767 from ohagendorf/nucleo_disco_coide
...
STM32xxx: CoIDE/gcc_arm exporter and startup_stm32xx update
2014-12-08 07:24:22 +00:00
f762a60f48
[DISCO_F303] missing wrap main in gcc_arm template
2014-12-08 01:02:40 +01:00
883b2bc0ce
[STM32xxx] CoIDE exporter and gcc_arm
...
- CoIDE options: wrap main and linker option DiscradUnusedSection=1 was
missing in some targets
- CoIDE options: corrected flash loader config for Nucleo_F030 and
Nucleo_F072
- CoIDE options: corrected memory layout (not used per default but now
it is the same as in linker script)
- gcc linker script: changed the memory size from hex number e.g. 0x2000
to decimal 8K
2014-12-07 20:07:56 +01:00
a6279aa351
Merge pull request #750 from PrzemekWirkus/travis-linking
...
Tools: Travis - Simple mbed SDK test linking against popular libraries
2014-12-03 14:34:36 +00:00
63d2735c58
Add back all missing targets
2014-12-03 11:14:09 +00:00
de90b72435
Fixed typo which added wrong parameter value for -t switch
2014-12-03 11:11:22 +00:00
fa5722a39c
Added --silent switches to both build.py and make.py.
...
build_travis.py now executes build.py and make.py with --silent switches to save space on Travis's console output
2014-12-03 11:01:19 +00:00
6255549570
Modified make.py so now parameter --silent suppreses Copy / Compile messages leaaving only Warning / Errors / build product info
2014-12-03 10:53:50 +00:00
32b214c4b1
Removed progress characters, they just look stupid in Travis console
2014-12-03 10:48:53 +00:00
e5d7f85597
Added new switch --silet to build.py to avoid endless screens of Copy / Compile. In silent mode only warnings / erros / build product will be displayed
...
Added new line after warning / errors
2014-12-03 09:36:58 +00:00
b2ab78673a
Added new switch --silet to build.py to avoid endless screens of Copy / Compile. In silent mode only warnings / erros / build product will be displayed
2014-12-03 09:25:11 +00:00
0c848f8290
Added new switch --silet to build.py to avoid endless screens of Copy / Compile. In silent mode only warnings / erros / build product will be displayed
2014-12-03 09:24:19 +00:00
45c1f43182
Increase the build system timeout when processing jobs to 5 minutes as initially designed
2014-12-02 18:00:06 +02:00
f6743c5b50
Merge pull request #751 from bcostm/master
...
Targets: NUCLEO_F303RE - Add new target
2014-12-02 15:35:46 +00:00
027a6bc35d
Final commit with chanes related to --testlib switch and test linking for
...
Travis CI in github.
2014-12-02 11:43:45 +00:00
a2fef756e5
Modified Travis build script to ommit --testlib switch - on Linux machines
...
linking the same lib twice causes linking errors (Not on Windows GCC_ARM though)
2014-12-02 11:39:23 +00:00
feee66d0fc
[NUCLEO_F303RE] Add target part 3 - workspace_tools
2014-12-02 07:51:14 +01:00
6c22025ae0
Added simple mbed SDK test linking against popular libraries
2014-12-01 16:51:03 +00:00
670eea7937
Modified make.py so now parameter -n can handle comma separated lists of test names.
...
Bugfix for option -p
2014-12-01 15:33:30 +00:00
2120e52a81
Modified make.py so now parameter -n can handle comma separated lists of test names.
2014-12-01 15:07:17 +00:00
e21bcaf790
Added new command line switches to link with external mbed libraries like: rtos, eth, usb, usb_host, testlib or ublox
...
This will allow users to link tests against libs. For example it is possible to build network test (like NET_1) using make.py now
2014-12-01 14:51:55 +00:00
0xc0170
GustavWi
bcostm
Yihui Xiong
ohagendorf
Austin Blackstone
Mike Fiore
vinnie rabbit
vincent rabbit
Nick DeLisi
Michael Brudevold
mazgch
Przemek Wirkus
Mihail Stoyanov