ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
813 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

283 Commits (971dfcf0e131e6afb6840a26bb95f92fd1e64ec2)

Author SHA1 Message Date
Bogdan Marinescu 3f82e7fa6f Use correct scatter file for LPC4088 2013-12-03 11:04:37 +02:00
Bogdan Marinescu 49df530ae7 Merge pull request #118 from bcostm/master 
Add STMicroelectronics NUCLEO_F103RB target
 2013-12-02 03:15:58 -08:00
Bogdan Marinescu 6aaa134516 Merge pull request #117 from Sissors/master 
Added (deep)sleep to KL25Z
 2013-12-02 01:55:33 -08:00
bcostm 3bcf77e4f7 NUCLEO_F103RB: minor changes 2013-12-02 09:22:28 +01:00
Sissors 9f89a4d218 Added (deep)sleep to KL25Z 
Sleep is wait mode

Deepsleep is very low power stop mode

During the interrupt that removes it from deepsleep it will run at low
speed until the PLL is automatically re-enabled after the interrupt.
 2013-11-30 19:28:00 +01:00
0xc0170 d8d526f656 Merge branch 'master' into K20D50 2013-11-28 17:24:57 +01:00
Michael Moon a249e39826 Improved baudrate calculation function. 
Uses 100% integer math, delivers more accurate results with fewer iterations in less time.

Since it seems most of the NXP chips use identical math, I have also altered the other targets in this commit.

If there are non-NXP chips which use a similar serial block, consider porting to those as well

Comparison:

         BAUD   DL MUL DIV  CPU_CLOCK
      -------  --- --- --- ----------
new: {   9600, 625,  1,  0,  96000000},	// Actual baud:    9600, error =0.00%,    1 iterations
old: {   9600, 625,  1,  0,  96000000},	// Actual baud:    9600, error =0.00%,    0 iterations

new: {  38400, 125,  4,  1,  96000000},	// Actual baud:   38400, error =0.00%,    8 iterations
old: {  38400,  81, 14, 13,  96000000},	// Actual baud:   38409, error +0.02%,  420 iterations

new: {  57600,  81,  7,  2,  96000000},	// Actual baud:   57613, error +0.02%,  120 iterations
old: {  57600,  54, 14, 13,  96000000},	// Actual baud:   57613, error +0.02%,  315 iterations

new: { 115200,  27, 14, 13,  96000000},	// Actual baud:  115226, error +0.02%,  120 iterations
old: { 115200,  27, 14, 13,  96000000},	// Actual baud:  115226, error +0.02%,  210 iterations

new: { 230400,  23, 15,  2,  96000000},	// Actual baud:  230179, error -0.10%,  120 iterations
old: { 230400,  17, 15,  8,  96000000},	// Actual baud:  230179, error -0.10%,  525 iterations

new: { 250000,  24,  1,  0,  96000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  24,  1,  0,  96000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   6,  1,  0,  96000000},	// Actual baud: 1000000, error =0.00%,    1 iterations
old: {1000000,   6,  1,  0,  96000000},	// Actual baud: 1000000, error =0.00%,    0 iterations

new: {2000000,   3,  1,  0,  96000000},	// Actual baud: 2000000, error =0.00%,    1 iterations
old: {2000000,   3,  1,  0,  96000000},	// Actual baud: 2000000, error =0.00%,    0 iterations

new: {   9600, 514, 15,  4, 100000000},	// Actual baud:    9600, error =0.00%,  110 iterations
old: {   9600, 337, 15, 14, 100000000},	// Actual baud:    9593, error -0.07%, 1365 iterations

new: {  38400,  93,  4,  3, 100000000},	// Actual baud:   38402, error +0.01%,  120 iterations
old: {  38400,  85, 12, 11, 100000000},	// Actual baud:   38363, error -0.10%,  525 iterations

new: {  57600,  62,  4,  3, 100000000},	// Actual baud:   57604, error +0.01%,  120 iterations
old: {  57600,  61,  9,  7, 100000000},	// Actual baud:   57633, error +0.06%,  840 iterations

new: { 115200,  31,  4,  3, 100000000},	// Actual baud:  115207, error +0.01%,  120 iterations
old: { 115200,  31,  4,  3, 100000000},	// Actual baud:  115207, error +0.01%,  525 iterations

new: { 230400,  19,  7,  3, 100000000},	// Actual baud:  230263, error -0.06%,  120 iterations
old: { 230400,  19,  7,  3, 100000000},	// Actual baud:  230263, error -0.06%,  735 iterations

new: { 250000,  25,  1,  0, 100000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  25,  1,  0, 100000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   5,  4,  1, 100000000},	// Actual baud: 1000000, error =0.00%,    8 iterations
old: {1000000,   5,  4,  1, 100000000},	// Actual baud: 1000000, error =0.00%,  315 iterations

new: {2000000,   2,  9,  5, 100000000},	// Actual baud: 2008929, error +0.45%,  120 iterations
old: {2000000,   2,  9,  5, 100000000},	// Actual baud: 2008929, error +0.45%,  315 iterations

new: {   9600, 625,  4,  1, 120000000},	// Actual baud:    9600, error =0.00%,    8 iterations
old: {   9600, 404, 15, 14, 120000000},	// Actual baud:    9602, error +0.02%, 1575 iterations

new: {  38400, 179, 11,  1, 120000000},	// Actual baud:   38408, error +0.02%,  120 iterations
old: {  38400, 101, 15, 14, 120000000},	// Actual baud:   38409, error +0.02%,  525 iterations

new: {  57600,  93,  5,  2, 120000000},	// Actual baud:   57604, error +0.01%,  120 iterations
old: {  57600,  68, 12, 11, 120000000},	// Actual baud:   57545, error -0.10%,  420 iterations

new: { 115200,  47, 13,  5, 120000000},	// Actual baud:  115248, error +0.04%,  120 iterations
old: { 115200,  34, 12, 11, 120000000},	// Actual baud:  115090, error -0.10%,  315 iterations

new: { 230400,  19,  7,  5, 120000000},	// Actual baud:  230263, error -0.06%,  120 iterations
old: { 230400,  17, 12, 11, 120000000},	// Actual baud:  230179, error -0.10%,  210 iterations

new: { 250000,  30,  1,  0, 120000000},	// Actual baud:  250000, error =0.00%,    1 iterations
old: { 250000,  30,  1,  0, 120000000},	// Actual baud:  250000, error =0.00%,    0 iterations

new: {1000000,   5,  2,  1, 120000000},	// Actual baud: 1000000, error =0.00%,    3 iterations
old: {1000000,   4,  8,  7, 120000000},	// Actual baud: 1000000, error =0.00%,  210 iterations

new: {2000000,   3,  4,  1, 120000000},	// Actual baud: 2000000, error =0.00%,    8 iterations
old: {2000000,   2,  8,  7, 120000000},	// Actual baud: 2000000, error =0.00%,  210 iterations
 2013-11-29 02:44:14 +11:00
0xc0170 c5a2e6ed0e pwm, spi - pin definition, dac removed 2013-11-27 18:46:30 +01:00
bcostm 1159845529 NUCLEO_F103RB: update channels management in analogin api 2013-11-27 15:39:57 +01:00
0xc0170 0e99a7c9bd Analog API - pins, analog pins (arduino) correction, irq 
- ADC - pins, mux
	- analog pins - Ax
	- irq - port A - E
 2013-11-26 20:08:13 +01:00
Bogdan Marinescu 256f70fffc Merge remote-tracking branch 'origin/master' 2013-11-26 17:14:46 +02:00
Bogdan Marinescu 3c0a8b633f Provide generic pinout defines 
This commit adds generic peripheral names to various mbed enabled
boards, to make it easier to write portable code amongst various
mbed boards.
 2013-11-26 17:12:36 +02:00
bcostm dd292a7e71 NUCLEO_F103RB: Add pwmout api + change timers for ticker 2013-11-26 09:26:08 +01:00
bcostm c33dbfd63d Enable STDIO messages used by the test firmwares 2013-11-25 10:20:39 +01:00
0xc0170 3dc97b20c0 startup ARM - stack pointer, serial functional 
- stack pointer correction
	- startup for ARM - clean up
	- GCC ARM linker - RAM size correction
	- NVIC - RAM address
 2013-11-22 21:21:01 +01:00
bcostm c47bc1780a Add UseMicroLIB option for exported project 2013-11-22 11:41:07 +01:00
Bogdan Marinescu f6c9c8db5e Fixed initial SP value 2013-11-21 19:07:52 +02:00
Emilio Monti 6a5335a40e Merge pull request #112 from Sissors/master 
Added sleep to LPC81x
 2013-11-21 01:58:28 -08:00
Sissors 585e05ca6a Added sleep to LPC81x 
http://mbed.org/users/mbed_official/code/mbed-src/pull-request/6
 2013-11-21 08:19:44 +01:00
hototogi 03b79b5920 support GCC_ARM for LPC4330_M4 
- Linker script is based on LPC1768
     number of NVIC is 16 (CORE) + 53 (M4 in LPC43xx) = 69,
    therefor, reserve at the top of RAM0 (address:0x10000000)
    to relocate NVIC vector table
 - startup file is based on startup_ARMCM4.S in CMSIS V3.20
     change NVIC name for cortex-M4 of LPC43xx
 - add GCC_ARM for LPC4330_M4 in python scripts
 - add some descriptions for GCC_ARM
 2013-11-20 17:03:59 +09:00
0xc0170 4e09b52a71 K20 uVision files, ld NVIC offset 
- K20 KEIL files
	- clock set to 1 (48MHz)
	- offset in GCC ld for vectors in RAM
	- us ticker - PIT timer interrupt implementation
 2013-11-19 20:06:26 +01:00
bcostm 415ac34b56 Add analogin, serial and spi support for NUCLEO_F103RB 2013-11-19 09:11:31 +01:00
0xc0170 8ca8014c00 Merge branch 'master' into K20D50 2013-11-18 20:34:45 +01:00
bcostm 70dd0d891e Add STM32F10x standard periph driver 2013-11-14 11:33:29 +01:00
bcostm 6d9b523185 Update workspace_tools files 2013-11-14 11:07:01 +01:00
bcostm beb779b3d6 Rename target 2013-11-13 09:29:29 +01:00
Bogdan Marinescu 5b6faea448 Removed redundant label TARGET_LPC81X_COMMON 2013-11-11 13:28:18 +02:00
Joris Aerts 76ffc4935e Fix bug in gpio_set not setting reserved pins correctly 
Loop going over reserved pins was not going over all entries as result of incorrect sizeof
 2013-11-08 13:39:00 -08:00
bcostm b8ddfce3d0 Change folder name to TARGET_NUCLEO-F103RB 2013-11-08 11:19:09 +01:00
bcostm 96a96f2cb6 Add STM32F10X cmsis files 2013-11-07 14:16:01 +01:00
bcostm c0d5675480 Add STM NUCLEO64 STM32F10X basic files 2013-11-07 11:32:01 +01:00
0xc0170 f4591dbbab Merge branch 'upstream_master' into dev_kl46z 2013-11-05 22:08:07 +01:00
Andreas Rebert 09cf4ef128 Support for exporting to GCC_ARM 2013-10-31 13:28:05 +01:00
Emilio Monti 317a1f66d2 Merge pull request #91 from jorisa/master 
Add CAN api filter support and LPC11CXX CAN implementation
 2013-10-25 06:58:05 -07:00
Bogdan Marinescu 9d881770c9 Merge remote-tracking branch 'github/master' 2013-10-25 15:43:01 +03:00
Adam Green 969733ae8f serial_putc() to make better use of Tx FIFO 
If don't know if this is an issue that anyone cares about.  I am also
not sure what the best way to solve it is either.  I just thought I
would issue a pull request with this commit to bring the issue to light
and show a possible solution that I have tested on my mbed-1768 device.

Previously the serial_putc() API didn't make any use of the Tx FIFO
since the serial_writable() API it utilizes only returns true when the
FIFO is completely empty.  This is due to the fact that the THRE bit of
the UART's LSR (Line Status Register) only goes high when the whole
FIFO is empty.

I noticed this when doing some performance testing with the network
stack.  I went from calling printf() to output 3 bytes every 10 seconds
(with packet drop stats) to instead output 4 bytes every 10 seconds.
I thought these should easily fit in the 16 byte FIFO but outputting
one extra byte caused an additional three 550 byte UDP packets to be
dropped.  This should only happen if the additional character being
sent to the UART was taking away extra CPU cycles from the network
stack.

My solution is to keep track of the number of bytes that have been
placed in the Tx FIFO since it was last detected as being completely
empty (via the THRE bit).  Only once this count hits 16 does the code
then block, waiting for the THRE bit to go high.  Each time the THRE
bit does go high, the count is reset to 0 again and it is incremented
for each byte that is loaded into the THR.
 2013-10-25 15:17:06 +03:00
Joe Turner 6ae1e9e360 Merge branch 'master' of git://github.com/mbedmicro/mbed into bugfix-STM32-vectors 2013-10-25 13:11:25 +01:00
Joe Turner 0ef4905728 Fix relocation of vector on STM32. 2013-10-25 13:09:06 +01:00
Bogdan Marinescu 544ac9e728 Disable DEVICE_STDIO_MESSAGES for LPC81X 
Because the LPC81X HAL implementation calls error(), which in turn calls
fprintf(), quite a bit of code is added to the image, which is not a good
idea on such resource constrained targets.
 2013-10-25 14:51:01 +03:00
Joris Aerts 739f2a6375 Add can_api hal implementation to LPC11CXX target 
Most of the functionality works, interrupts might need a little more work.
 2013-10-22 11:02:10 -07:00
Joris Aerts 08c1483eb3 Add bitfields definition to LPC11XX target 
Generated from UM10398
 2013-10-22 11:00:17 -07:00
Joris Aerts 067e446ae2 Add CAN->filter to API and add placeholders to hal's 
Add filter function and modify CAN->read definition to allow reading specific messages.
 2013-10-22 10:57:28 -07:00
0xc0170 b0537af763 gpio irq enable/disable 
- InterruptIn disable_irq/enable_irq
 2013-10-19 22:28:29 +02:00
0xc0170 d9ed7aba77 CMSIS KL46 files (were KL25 renamed) 2013-10-17 19:32:40 +02:00
Andreas Rebert a0a6cbe1d3 Merge branch 'master' into lpc4088 2013-10-11 14:02:59 +02:00
Andreas Rebert a574fd73b3 Bugfixes for I2C and port impl 2013-10-11 14:01:49 +02:00
0xc0170 122f24b83f Update: Merge branch 'master' into freedomKL46Z 
Conflicts:
	workspace_tools/targets.py
 2013-10-06 18:55:32 +02:00
Joris Aerts 7ed6acb08a Move pwmout_api.c/PeripheralNames.h to LPC11XX_11CXX common 
Because CT32B1 (P1_1, P1_2 and P1_3) is used by us_ticker.c for wait and ticker function. Since wait/ticker is commonly used by mbed code and I decided CT32B1 of LPC11XX should only be used for this function, not for PwmOut.
P1_6 and P1_7 are used by UART (USBTX/USBRX) and I think they should not be assigned to other function.
 2013-09-30 08:11:56 -07:00
Joris Aerts 4d0c864b16 Move adc_pinmap.h to LPC11XX_11CXX common 
Merge back into analog_api.c. P1_3/ADC0_4 (SWDIO) now disabled for both targets
 2013-09-30 08:07:26 -07:00
0xc0170 8df14cadc9 scatter file - 32kb RAM, startup - removed heap, stack init 
- clock set to 1 (external crystal)
 2013-09-29 22:36:50 +02:00
0xc0170 5dcd8ea10e ARM (KEIL) files for KL46Z 2013-09-29 20:40:06 +02:00
0xc0170 b83fd7fb3b MUX corrections, Arduino Analog signals 
- added new MUX options to all drivers
  - removal of LED which are not there
  - analog arduino R3 signals were switched
 2013-09-29 20:04:56 +02:00
0xc0170 2ca3195b17 NVIC offset and address in RAM correction 2013-09-29 18:53:57 +02:00
Joris Aerts e1967755a5 Move spi_pinmap.h to LPC11XX_11CXX common 
Merge back into spi_api.c. P0_10/SPI_0 (SWCLK) now disabled for both targets
 2013-09-27 19:10:08 -07:00
Joris Aerts e9f5c8d3ca Move README.md to LPC11XX_11CXX common 2013-09-27 18:56:11 -07:00
Joris Aerts 3fe31ad50e Move objects.h to LPC11XX_11CXX common 
Use #if DEVICE_CAN for can_s definition
 2013-09-27 18:53:19 -07:00
Bogdan Marinescu f580c008b1 Merge pull request #78 from mconners/master 
Added KL46Z support
 2013-09-25 03:18:49 -07:00
Bogdan Marinescu 8f57c1e847 Merge remote-tracking branch 'github/master' 2013-09-25 10:27:17 +01:00
Bogdan Marinescu 1e224c5152 Fix RAM size for LPC11C24 in ARM/uARM linker command files 2013-09-25 10:18:43 +01:00
Bogdan Marinescu 30907d7772 Refactor LPC1114 and LPC11C24 code 
Since most of the code for LPC1114 and LPC11C24 is similar, refactor the
code structure to avoid duplication of the common code.
 2013-09-25 10:17:19 +01:00
Michael Conners 5bd25ac046 Added K20D5M support 2013-09-24 10:36:04 -04:00
Michael Conners afcc79ad27 Added KL46Z support 2013-09-24 10:01:06 -04:00
Andreas Rebert bb35d16521 Merged bugfixes and improvments for LPC1768 target to LPC4088 target 2013-09-23 11:39:52 +02:00
Bogdan Marinescu f2f7b213cd Merge pull request #75 from jorisa/master 
Keep LPC11CXX in sync with LPC11XX
 2013-09-20 01:53:40 -07:00
Emilio Monti 38ed9eb6a0 Merge pull request #72 from jorisa/master 
Split uVision project source files in groups mbed/hal/src
 2013-09-19 01:46:53 -07:00
Bogdan Marinescu 81b372d362 Merge pull request #73 from ytsuboi/master 
Fixed LPC1114 ADC offset problem
 2013-09-19 01:35:42 -07:00
Toyomasa Watarai 866858a816 Fixed LPC1114 ADC offset problem 2013-09-19 16:19:04 +09:00
Toyomasa Watarai f4bfe5aedb Revert "Fixed ADC offset problem" 
This reverts commit 399acd1d6f.
 2013-09-19 16:16:52 +09:00
Toyomasa Watarai 399acd1d6f Fixed ADC offset problem 2013-09-19 16:16:05 +09:00
Joris Aerts a4badc7dd2 Keep LPC11CXX in sync with LPC11XX 
Only differences in CMSIS now are:
* Top of RAM (0x10001000 vs 0x10002000)
* Clock configuration (IRC/System PLL vs System Oscillator/IRC)
 2013-09-18 18:54:53 -07:00
Joris Aerts 979bba6864 Don't call mbed_interface_disconnect when DEVICE_SEMIHOST is disabled 2013-09-18 14:10:29 -07:00
Emilio Monti 96ea3db1b3 Merge pull request #66 from dinau/lpc2368_mod 
LPC2368 mod
 2013-09-16 08:00:20 -07:00
dinau efbc52465d LPC2368 [GCC_ARM]: Silence some warnings. 2013-09-13 22:01:21 +09:00
dinau 43acaa4166 LPC2368 [GCC_ARM]: Fixed: Compilation and link errors in case "SD" example. 2013-09-13 22:01:19 +09:00
Emilio Monti 2481fbe2a2 Merge pull request #62 from arebert/lpc4088 
LPC4088: PIN mode fix, export to external tools and MAC address retrieval
 2013-09-13 05:59:14 -07:00
Erik Olieman 94ff741989 LPC1768 InterruptIn speedup 
Use __CLZ to speed up GPIO interrupt processing.
 2013-09-11 18:46:18 +03:00
Bogdan Marinescu 171dda705c Merge pull request #63 from jorisa/master 
Fix hardfault when attaching callback to CAN2 when CAN1 is not defined
 2013-09-10 03:22:55 -07:00
Joris Aerts efd3d8d8e0 Fix hardfault when attaching callback to CAN2 when CAN1 is not defined 
Fault is triggered by trying to read LPC_CAN1->IER when the peripheral is powered off. Fixed by checking the power control register before checking the IER register.
 2013-09-09 09:06:04 -07:00
Bogdan Marinescu cfa6a1d912 Merge pull request #61 from ytsuboi/master 
Fixed problem in PWMOUT mapping table
 2013-09-09 08:22:11 -07:00
Andreas Rebert 00cfdbad2a Merge remote-tracking branch 'upstream/master' into lpc4088 2013-09-09 14:13:08 +02:00
unknown 0e36bdd457 Bugfix: PIN Modes was not set correctly 
Added: Export to uVision and Code Red toolchains
 2013-09-09 14:10:11 +02:00
Bogdan Marinescu 1f243a900c Merge remote-tracking branch 'github/master' 2013-09-09 12:31:42 +03:00
Bogdan Marinescu fded46b459 [LPC1768] Fix serial_clear 
serial_clear() erroneously disabled the UART FIFOs.
Reported by Adam Green.
 2013-09-09 12:28:11 +03:00
Toyomasa Watarai d0d2df3ce5 Fixed problem in PWMOUT mapping table 
Fixed problem in PWMOUT output issue.
Startup code cean-up (correced exception names).
Corrected test cases.
 2013-09-09 18:15:51 +09:00
Bogdan Marinescu d51411294f Merge pull request #57 from adamgreen/serialTxDropsRx 
serial_putc() can cause rx bytes to be dropped
 2013-09-09 01:19:29 -07:00
Joris Aerts 743e178455 Fix MASKED_ACCESS bug in gpio_init, now same as LPC11xx (Also use PIN_SHIFT instead of magic number 8 in gpio_set) 2013-09-08 18:57:40 -07:00
Adam Green 5d27f98c7b serial_putc() can cause rx bytes to be dropped 
While fixing this issue in the various LPC* ports, I noticed a comment
pointing to this mbed forum post which summarizes this bug quite well:
  https://mbed.org/forum/bugs-suggestions/topic/4473/

This bug was introduced in the following commit:
2662e105c4

The following code was added to serial_putc() as part of this commit:
    uint32_t lsr = obj->uart->LSR;
    lsr = lsr;
    uint32_t thr = obj->uart->THR;
    thr = thr;

As the forum post indicates, this causes the serial_putc() routine to
actually eat an inbound received byte if it exists since reading THR is
really reading the RBR, the Receiver Buffer Register.  This code looks
like code that was probably added so that the developer could take a
snapshot of these registers and look at them in the debugger.  It
probably got committed in error.
 2013-09-07 00:44:44 -07:00
Bogdan Marinescu 423f1abd63 Fix startup files for various versions of LPC11Uxx 
LPC11U24/LPC11U24_301/LPC11U35_401 shared the same startup file for ARM
and uARM toolchains, which is wrong, because the initial SP value is
different for LPC11U24_301. This commit fixes this issue by giving each
target its own startup file.
 2013-09-06 11:50:52 +03:00
Bogdan Marinescu 95f6826196 Refactor code for LPC810/LPC812 
There were lots of overlaps in the code for LPC810 and LPC812, including
duplicated source files. This commit adds a TARGET_LPC81X_COMMON folder in
both HAL and CMSIS, this folder keeps common code for the targets.
 2013-09-05 19:00:19 +03:00
ytsuboi 46003d4c3c Merge remote-tracking branch 'upstream/master' 2013-09-05 13:01:12 +09:00
Abe Karplus 96101aed32 Added complete PwmOut mappings for KL25Z 2013-09-04 15:52:58 +03:00
ytsuboi 0718c7671a Merge remote-tracking branch 'upstream/master' 2013-09-03 19:38:34 +09:00
dinau 8503ccb7a3 LPC2368 [GCC_ARM, GCC_CR]: 
1. Added: GCC_CR toolchain ID for LPC2368. (targets.py)
2. Modified: Startup codes for GCC_ARM and GCC_CR toolchain.
3. Verified: "ticker" and "basic" test program work well, so far.
(Fixed typo.)
 2013-08-31 16:00:40 +09:00
dinau 7bcdf0b980 LPC2368 [GCC_ARM, GCC_CR]: 
1. Added: GCC_CR toolchain ID for LPC2368. (targets.py)
2. Modified: Startup codes for GCC_ARM and GCC_CR toolchain.
3. Verified: "ticker" and "basic" test program works well, so far.
 2013-08-31 13:33:34 +09:00
Bogdan Marinescu 1798920cf4 Merge remote-tracking branch 'github/master' 2013-08-30 12:26:37 +03:00
Bogdan Marinescu e870a90ff2 Added toolchain hooks and support for LPC4088_EA binary generation 
A new hooks mechanism (hooks.py) allows various targets to customize
part(s) of the build process. This was implemented to allow generation of
custom binary images for the EA LPC4088 target, but it should be generic
enough to allow other such customizations in the future. For now, only the
'binary' step is hooked in toolchains/arm.py.
 2013-08-30 12:19:08 +03:00
dinau 841ce1d719 Fixed: The issue of interrupt vector remapping for GCC_ARM LPC1114 2013-08-29 21:40:57 +09:00
dinau 97d92789ec Fixed: The issue of interrupt vector remapping for GCC_ARM LPC1114 2013-08-28 23:29:16 +09:00
Bogdan Marinescu 2cdd41d9b1 Added support for LPC11U24/_301 and LPC11U35_401 in uARM 2013-08-27 15:31:47 +03:00
Bogdan Marinescu 9a270999d0 Added support for LPC11U35_401 in ARM and GCC_ARM 2013-08-27 15:19:01 +03:00