These files have been imported/copied from:
* ARMmbed/trusted-firmware-m
* ARMmbed/tf-m-tests
These are generic files, which are required for TF-M v1.2 integration
with Mbed OS for PSA_V8M and PSA_DUAL_CORE targets.
Rather than maintaining a specific `TARGET_TFM_V1_x`, its better to use
more generic name `TARGET_TFM_LATEST` to avoid confusion on the latest
TFM version supported by Mbed OS
* Rename the folder from `TARGET_TFM_V1_1` to `TARGET_TFM_LATEST`
* Update the CmakeLists.txt
* Change the name of the MUSCA targets to maintain uniformity
with TF-M v1.2
* Update target.json for PSA_V8_M to use `TFM_LATEST`
Files have been automatically imported by setting MBED_TLS_RELEASE to
mbedtls-2.24.0 in connectivity/mbedtls/tools/importer/Makefile and
running `make` in that directory.
In `targets.json`, the base target ARM_MPS2_Target does not have `iar`
in `supported_c_libs`. But its inherited targets have `IAR` in
`supported_toolchains`, causing configuration check to fail.
Modify scatter files to specify heap load region and add small libraries
to list of supported libraries in target.json.# Please enter the commit message for your changes. Lines starting
- Make packet trace optional, can be enabled by enabling macro
STM32xx_DEEP_TRACE
- Shorten traces during driver initialisation to avoid problems with
driver startup when soft reset is used.
This needs to be removed as there should not be a
name requirement for application CMake variable name.
Furthermore, in certain uses cases it prevents
successful builds for some Mbed targets. For instance
when building Greentea test applications for Mbed
targets that require post build operations as they do
not define APP_TARGET.
This commit introduces a default application start address (`0x1000`) and size limitation (`0xDF000`) to accomodate the Nordic USB bootloader.
The bootloader consists of a master boot record in flash from address `0x0` to `0x1000` and the actual bootloader application starting at `0xE0000` to the end of flash (`0x100000`). The bootloader enables firmware updates over USB using nRF Connect for Desktop.
More documentation regarding the open bootloader can be found here: https://infocenter.nordicsemi.com/topic/sdk_nrf5_v17.0.2/ble_sdk_app_open_bootloader.html
This commit introduces an option, `ep-atlas.enable-usb-stdio-console`, that will retarget the Mbed stdio console handle to a USBSerial instance if enabled.
Please note that if your application uses USB, it will conflict with this option. You should disable this option and implement a composite USB device in your application if you require stdio over USB.
This option is disabled by default so it will not cause issues with existing user code.
This commit introduces an implementation of the `subtarget_sdk_init` startup hook (called during `mbed_sdk_init`) that configures the internal regulators of the nRF52840.
The configuration sets up the internal regulator to output 3.3V. If this is not done, the default system voltage may be too low for the on-board indicator LEDs to conduct (ie: system voltage is lower than LED forward voltage).
The `mbed_sdk_init` startup hook is implemented at the NRF52-series level and so is unavailable for override. This commit adds an additional startup hook for NRF52 subtargets to perform any other startup initialization required.
Raise an exception in case of a failure to find an image to use
for the binary signature. This prevents the method from assuming
the image is always successfully retrieved and crash when
attempting to print a message
Update the BMCR0, BMCR1 registers to adjust the SEMC
re-order rules. This can improve the SDRAM stability
under multiple AXI masters system.
Signed-off-by: Gavin Liu <gang.liu@nxp.com>
Update the LUT to fix the winbond qspi flash erase issue.
Update the page program interface to fix the qspi flash program issue.
Signed-off-by: Tim Wang <tim.wang@nxp.com>
Vikas Katariya
Lingkai Dong
Martin Kojtal
Harrison Mutai
Hugues Kamba
Johannes Stratmann
Jost, Chris
Arto Kinnunen
jeromecoutant
George Beckstein
Gavin Liu
Tim Wang