Commit Graph

26292 Commits (8ef742a49c1682f9ef3ba50148b871e38c3866cc)

Author SHA1 Message Date
Qinghao Shi 4a0ca21edd BLE TEST: remove duplicated and failing test 2019-08-28 13:12:04 +01:00
Mahesh Mahadevan 695e930f09 KL43Z: Enable USBDevice
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
2019-08-28 13:12:04 +01:00
Marcelo Salazar 4d5bf75ae6 Fix ELMO_F411RE detect code 2019-08-28 13:12:03 +01:00
Martin Kojtal 2cfea4faba target TT_: fix compilation errors
They define slave for spi, rtc but do not contain implementation - removing them.
Fixes #11143
2019-08-28 13:12:03 +01:00
Martin Kojtal d6304e322c
Merge pull request #11181 from artokin/mbed_wisun_api_update
mbed-mesh-api: Add new API for Wi-SUN configuration
2019-08-28 13:50:13 +02:00
Martin Kojtal a6372e521c
Merge pull request #11345 from yogpan01/fix-bare-metal-pdmc
Fix bare-metal configuration to support Pelion Device Management Client
2019-08-28 13:07:36 +02:00
Martin Kojtal ae247b5645
Merge pull request #11326 from kyle-cypress/pr/psoc6-pdl
Update PDL for Cypress Targets
2019-08-28 12:30:37 +02:00
Sathish Kumar Mani a4aeee941d mbed-os/LwIP changes and fixes in auto-IP for Bonjour Conformance Test
This PR is to fix the issues in LwIP for AutoIP which is required for passing Bonjour Conformance Test for mDNS. Following gives the summary of the changes/fixes added.

Changes:

1. Following issues are fixed in LwIP for AutoIP.
- Fixed bug in max conflict rate limiting: According to RFC section RFC 3927 Section 2.2.1 conflict probe interval should be increased to 60 seconds, once conflict count reaches after MAX_CONFLICTS (i.e., 10) counts. The initial value of 'autoip->tried_llipaddr' is 0. Hence the probe interval (i.e., autoip->ttw) should be increased to 60 secs when 'autoip->tried_llipaddr >= MAX_CONFLICTS'
- Added code to free 'autoip' client in autoip_stop() API: New 'autoip' client is allocated in autoip_start() API, and the client is not freed during autoip_stop(). This would result in memory leak, if not freed. Updated autoip_stop() API to take care of releasing the memory allocated for 'autoip' client.

2. Introduced a configurable macro "MBED_CONF_LWIP_DHCP_TIMEOUT" in "lwipopts.h" to configure DHCP timeout based on the usecase requirement. For example: bonjour conformance test would need a DHCP timeout value which is grater than 320 secs to run mDNS probing test to verify protocol compilance of the implementation.

Tested the fixes using Bonjour Conformance Test tool Version 1.5.0 for IPv4. It has successfully passed Bonjour Conformance Test.
2019-08-28 15:57:36 +05:30
Martin Kojtal d7b5f759ae
Merge pull request #11324 from kyle-cypress/pr/psoc6-csp
PSOC6: Update CSP to latest
2019-08-28 10:07:44 +02:00
Martin Kojtal 4cdca93e99
Merge pull request #11265 from kjbracey-arm/tuple
Add <mstd_tuple> and ARMC5 <tuple>
2019-08-28 10:04:52 +02:00
Arto Kinnunen f8289ec0ac mbed-mesh-api: Add API set_file_system_root_path 2019-08-28 09:34:30 +03:00
Arto Kinnunen 774162dd83 mbed-mesh-api: Add new Wi-SUN certificate API
Add new API for setting Wi-SUN:
-Setting own/trusted certificates
-Removing own/trusted certificates
2019-08-28 09:34:30 +03:00
Arto Kinnunen c0f3cb7568 mbed-mesh-api: Add new Wi-SUN API
Add new API for setting Wi-SUN:
 -network name
 -regulatory domain, operating mode and operating class
2019-08-28 09:34:30 +03:00
Martin Kojtal 7e0fb8fab9
Merge pull request #11293 from NXPmicro/K82F_Add_USBDevice
K82F: Add USBDEVICE support
2019-08-28 07:27:40 +02:00
Martin Kojtal d2c05915ac
Merge pull request #11276 from ARMmbed/sip-workshop
Add integration tests
2019-08-28 07:13:30 +02:00
Martin Kojtal b27aa8c85d
Merge pull request #11335 from JarkkoPaso/nanostack_release_for_mbedos_5_14
Nanostack release for mbed OS 5.14
2019-08-28 07:10:16 +02:00
Ryan Morse c611e76297 Update WHD to latest 1.30 build 2019-08-27 17:16:44 -07:00
Ryan Morse ac3951097f Update PDL to 1.3.0 final 2019-08-27 16:13:07 -07:00
Ryan Morse 5c899a3350 Bug fixes to interrupt/event handling in SDHC HAL 2019-08-27 15:29:32 -07:00
Malavika Sajikumar db0d3d21e6 Updating SDP-K1 PinNames.h file.
- Removing LED pin definitions based on color.
- Removing and updating incorrect USB pin definitions.
- Adding comments for Arduino SPI and I2C pins.
2019-08-27 15:24:08 -07:00
Shuopeng Deng 8ad377add3 Fix I2C handling of 1 byte external memory address 2019-08-27 15:10:34 -07:00
Ryan Morse 459666f8f2 Fixed issue in QSPI when there aren't 8 pins 2019-08-27 15:10:34 -07:00
Kyle Kearney 375221097c Update CSP to latest
Update HAL adapter for interface changes
Misc minor fixes to HAL adapter
2019-08-27 15:10:34 -07:00
Martin Kojtal 6add979210
Merge pull request #10750 from jarvte/eventqueue_cancel_return
Changed EventQueue::cancel to return boolean value
2019-08-27 20:50:03 +02:00
Yogesh Pande 6edab0e13a Fix to use correct build flag MBED_CONF_NANOSTACK_CONFIGURATION
The bare-metal configuration should be using MBED_CONF_NANOSTACK_CONFIGURATION
instead of MBED_CONF_NANOSTACK_CONFIG.

Fixing the typo for flagging.
2019-08-27 17:20:40 +03:00
Jammu Kekkonen 86640e5bfe Bugfix: won't rely on erase value to detect is a sector erased
When flashing a binary STLink won't skip writing padding which happens
to be the same value as flash's erase value. STM32L4 based targets
have an additional 8-bit of embedded ECC for each 64-bit word of data.
The initial value, when a sector is erased, for the ECC bits is 0xFF.
When you write the erase value to a given address these bits gets
modified to something different due to the ECC algoritm in use. The
visible bits are intact but difference in ECC value prevents flipping
any 1's to 0's. Only way to proceed is to erase the whole sector.
2019-08-27 15:39:47 +03:00
Dominika Maziec b5826fc63e Mutex: _count incrementation brought back 2019-08-27 14:18:41 +02:00
Kevin Bracey 4b4859cbd0 mstd_iterator: correct comments 2019-08-27 14:37:07 +03:00
Kevin Bracey 3664912acc mstd_utility: add missing integer_sequence helpers 2019-08-27 14:37:07 +03:00
Kevin Bracey d45e3b5e57 Add <mstd_tuple> and ARMC5 <tuple>
tuples will be useful for things like `mbed::Event` and
`mbed::Callback` - storing parameter packs from variadic templates.

Create a C++14(ish) `<tuple>` for ARMC5, and a `<mstd_tuple>` that
adds `apply` and `make_from_tuple` from C++17.
2019-08-27 14:37:07 +03:00
Yogesh Pande 076deeb4a9 Bare metal support for running PDMC
PDMC requires event loop to also support bare metal configuration.
It requires to adapt eventloop for bare-metal configuration.
2019-08-27 13:09:56 +03:00
Chun-Chieh Li 650e2e593c ESP8266: Support power on/off in custom wiring
In custom wiring, there can be a power pin to power on/off the modem. This
commit supports it and allows for the following configurations:

- power pin name
- power pin polarity
- power on/off delay time
2019-08-27 17:57:06 +08:00
Jarkko Paso 45d1c68814 S2-LP: Sync with development repository 2019-08-27 11:42:08 +03:00
Martin Kojtal 7e179f5beb
Merge pull request #11301 from jeromecoutant/PR_L4R
STM32L4+ : increase system clock from 80 MHz to 120 MHz
2019-08-27 09:49:09 +02:00
Sathish Kumar Mani fe252a77c1 mbed-os/LwIP changes and fixes in auto-IP for Bonjour Conformance Test.
Changes:
  1. Following issues are fixed in LwIP for AutoIP.
     a) Fixed bug in max conflict rate limitting.
        - According to RFC section RFC 3927 Section 2.2.1 conflict probe interval
          should be increased to 60 seconds, once conflict count reaches after
          MAX_CONFLICTS (i.e., 10) counts.
        - The initial value of 'autoip->tried_llipaddr' is 0. Hence the probe
          interval (i.e., autoip->ttw) should be increased to 60 secs
          when 'autoip->tried_llipaddr >= MAX_CONFLICTS'

     b) Added code to free 'autoip' client in autoip_stop() API.
        - New 'autoip' client is allocated in autoip_start() API, and the client
          is not freed during autoip_stop(). This would result in memory leak
          if not freed.
        - Updated autoip_stop() API to take care of releasing the memory allocated
          for 'autoip' client.
  2. Introduced a configurable macro "MBED_CONF_LWIP_DHCP_TIMEOUT" in "lwipopts.h"
     to configure DHCP timeout based on the usecase requirement. For example:
     bonjour conformance test would need a DHCP timeout value which is grater than
     320 secs to run mDNS probing test to verify protocol compilance of the implementation.
2019-08-27 08:17:43 +05:30
Kyle Kearney 33493b12d9 Update WHD clients for interface changes 2019-08-26 16:05:47 -07:00
Ryan Morse 66cf10f030 Update WHD to 1.30.0 2019-08-26 16:05:46 -07:00
Jarkko Paso 2bcb1a6c9d Merge commit '7c99079717dd610f0674f6cf38a77af14f987dc6'
* commit '7c99079717dd610f0674f6cf38a77af14f987dc6':
  Squashed 'features/nanostack/sal-stack-nanostack-eventloop/' changes from 7745556..276ff28
2019-08-26 15:46:10 +03:00
Jarkko Paso 7c99079717 Squashed 'features/nanostack/sal-stack-nanostack-eventloop/' changes from 7745556..276ff28
276ff28 Change event_data to uintptr_t

git-subtree-dir: features/nanostack/sal-stack-nanostack-eventloop
git-subtree-split: 276ff28179cc7f0c33fc28cb23bd26ea531f5dbf
2019-08-26 15:46:09 +03:00
Jarkko Paso b0f3ff2156 Merge commit '928754fbc507c71890fa69fbd9cd20ab37f1d2a6'
* commit '928754fbc507c71890fa69fbd9cd20ab37f1d2a6':
  Squashed 'features/nanostack/coap-service/' changes from 3b447d2..e9edb1b
2019-08-26 15:21:38 +03:00
Jarkko Paso 928754fbc5 Squashed 'features/nanostack/coap-service/' changes from 3b447d2..e9edb1b
e9edb1b Match COAP test stub to updated mbed-coap API (#124)

git-subtree-dir: features/nanostack/coap-service
git-subtree-split: e9edb1becdf501f1c1c234d81251a860ef90161a
2019-08-26 15:21:37 +03:00
Jarkko Paso 00bf399628 Merge commit 'b7910939daa15a8e658dbc58bccaeb3bb101d338'
* commit 'b7910939daa15a8e658dbc58bccaeb3bb101d338':
  Squashed 'features/nanostack/sal-stack-nanostack/' changes from 3c7d50e..4a19dc4
2019-08-26 15:13:00 +03:00
Martin Kojtal 421ad37433
Merge pull request #11122 from OpenNuvoton/nuvoton_m263
Support Nuvoton's new target NUMAKER_IOT_M263A
2019-08-26 14:12:36 +02:00
Jarkko Paso b7910939da Squashed 'features/nanostack/sal-stack-nanostack/' changes from 3c7d50e..4a19dc4
4a19dc4 Import new thread files
f6a021d Removed test files
b9e842a Merge branch 'release_internal' into release_external
7d5d869 Merge pull request #2167 from ARMmbed/release_internal_merge
26e2d43 Merge branch 'master' into release_internal
f43620f Add support for India band (#2166)
122f158 Merge pull request #2165 from ARMmbed/release_internal_merge
0e65ee5 Added disabling of NA for Thread BR PPP backbone
4c50e52 Added disabling of NA for Wi-SUN BR PPP backbone
d2ea325 Moved DAD enabled check to Ipv6 SLAAC handler
49994fc Added PPP interface to nanostack
3383e91 Merge pull request #2163 from ARMmbed/IOTTHD-3558
81f7511 MAC: print RF configs
397240a MAC: Implemented CCA threshold and TX power setting
5907042 Added check for allocation failures in EAPOL
9ed97c9 ETX update:
b489415 Add own certificate handling APIS (#2149)
888a0fb fhss_ws: check if 0 used as divider
586f2f2 Merge pull request #2160 from hugueskamba/hk-iotcore-1299-remove-fp-usage-ns_monitor
f1d03b1 Remove floating-point usage in Nanostack heap monitor
ef88f64 Removed rank comprae and also probe 5 best on the list.
a2887d6 Clean PAN id compare trace print.
f37dcf2 Wi-SUN NS NUD & Probe send update
f7133f8 Merge pull request #2158 from ARMmbed/remove_temp_debug_traces
2dc1a8e fhss_ws: removed temporary debug traces
96f962a Reduce wi-sun NS Probe
0a1beb2 GTK update trigger fix
a1d172e Limit Pan config sol timeout after 5 solication.
9d7414b Limit PAE supplikant GTK re-use for authentication from 2->1.
662df08 Fixed Key request address set issue if GTK mismatch is detected.
a56b908 Merge pull request #2153 from ARMmbed/IOTTHD-3650
9b33e98 Fixed mac_pd_sap CCA_PREPARE active ACK handler.
035af9a Enhanced ACK GEN and TX update
b1beb5d fhss_ws: typecast drift to int32_t
f786fc9 Merge pull request #2152 from ARMmbed/fhss_coverity_fix
6efff35 fhss_ws: Coverity fixes
d743e91 WS LLC brodacst shedule fix
6a6fb0c Removed old configuration options from Border router API
a051865 Merge pull request #2135 from ARMmbed/IOTTHD-3232
ff771b1 Added empty interface function for network name set
e94da3c Merge pull request #2146 from ARMmbed/IOTTHD-3571_2
234e649 added network name change function to public API
1770465 fhss_ws: Added temporary debug traces (IOTTHD-3571)
d400859 Fix Thread 1.1 unitests (#2145)
38978f3 wi-sun ETX update:
4a71b04 Adjust Thread functions defined for Thread 1.2 (#2139)
4d8dc0d remove border router from pan size calculation
fb3363e Merge pull request #2141 from ARMmbed/IOTTHD-3571
f01c5f2 fhss_ws: conversion macros/functions to support int64
a7b0027 Suprress dio sending whenRPL is not yet ready
f8c9d54 Adjust tracing (#2138)
678eaf8 Moved Thread 1.2 code to to correct place
f39d07e Merge pull request #2136 from ARMmbed/IOTTHD-3571
ab23116 FHSS: temporary debug traces (IOTTHD-3571)
09d4b06 MAC: Implemented PHY statistics

git-subtree-dir: features/nanostack/sal-stack-nanostack
git-subtree-split: 4a19dc4784d05a49981a8dce27bed6771e65feb5
2019-08-26 15:10:36 +03:00
Alexandre Bourdiol de121a308a Fix I2C issue with test mbed_hal_fpga_ci_test_shield
On last case #5 there was a last unexpected read.
It happened when stop condition was generated
2019-08-26 14:01:23 +02:00
Martin Kojtal 02d1873c06
Merge pull request #11266 from u-blox/feature_adc_temp_conf
ADC internal temperature support and EMAC header fix
2019-08-26 11:08:47 +02:00
Antti Kauppila 2bdf3bbf23 astyle fixes 2019-08-26 09:56:18 +03:00
Desmond Chen 77d403b20a Enable json overriding ESP8266 default baud rate 2019-08-26 11:38:30 +08:00
Kyle Kearney 04aa0a6e9d Update PDL 2019-08-23 17:58:41 -07:00
midd 2168b40948 Updated the LWIP buffer pool size for PSoC6
Increase size to 14 for all devices to increase heap availability.
2019-08-23 17:54:14 -07:00