As per the IAR Development guide, below options for CPU are valid
1. Cortex-M33
2. Cortex-M33.no_dsp (core without integer DSP extension)
3. Cortex-M33.fp (floating-point unit with support for single precision)
4. Cortex-M33.no_se (core without support for TrustZone)
5. Cortex-M4
6. Cortex-M4F
7. Cortex-M7
8. Cortex-M7.fp.dp (floating-point unit with support for double precision)
9. Cortex-M7.fp.sp (floating-point unit with support for single precision)
Util was common test folder, which was kept outside as we had
no mechanism to have common files for various tests in tools.
Now same can be achieved by having COMMON folder inside tests
directory
Few boards may fail the write actions due to HW limitations (like critical
drivers that disable flash operations). Just retry a few times until success.
In addition, remove the redundant retries in NVStore (not needed now).
Socket network interface tests were failing due to DICONNECTED event
being advertised, where GLOBAL_UP was expected. It turned out that
nanostack receives two events: APPL_EVENT_CONNECT and
APPL_BACKHAUL_INTERFACE_PHY_UP. The second attempt to connect obviously
returns errors, but it also causes events to be sent out to the
application. The second attempt should not take place in case the
bootstrap is already started.
I also fixed two reports being sent with DISCONNECT status, while they
are actually something else.
mbed_die was calling wait_ms in a critical section - this is deprecated
behaviour, and caused a fatal error in debug builds, potentially leading
to an infinite reboot loop if this was caused due to a reboot limit
halt.
Switch to using wait_us - this is safe in a critical section. This does
trigger a call to mbed_warning, due to the large parameter, but that is
harmless - it doesn't output anything to the console, and won't
overwrite the error context if it already contains something.
Set tasklet parameters before connecting to prevent the parameters to be set to 0.
The tasklet parameters are reset to 0 when wisun_tasklet_connect gets called,
thus those need to be set in the wisun_tasklet_configure_and_connect_to_network
before they are used. This is also done this way in other tasklets.
The pre-main check of error_reboot_count was applied repeatedly on
every boot, meaning that once the reboot limit was hit, every subsequent
reset would halt before main, until something managed to clear
or corrupt the error context.
Set the is_error_processed flag before halting, so that when an external
agent resets us while we're halted, we do not report the error and halt
again.
Brian Daniels
deepikabhavnani
Cruz Monrreal
Martin Kojtal
David Saada
Michal Paszta
jeromecoutant
paul-szczepanek-arm
Kevin Bracey
Jarno Lamsa
Jimmy Brisson