- Disable microsecond ticker interrupt on reinitialization
- Skip us_ticker_set_interrupt() if timestamp is already past
- Eliminate tmr2Config since tmrConfig is adequate for all timer config
- fix compiler warning message of flash_api.c
- fix compiler warning message of startup_ADuCM4050.c
- eliminate absolute address of ROM tables
- add MBED_APP_START and MBED_APP_SIZE to linker scripts
- ensure us_ticker_irq_handler() is called only when GP2 timer expires
- set us_ticker_set_interrupt() time interval to be 9.846 us
- set us_ticker_fire_interrupt() time interval to be 0.03846 us
- convert tab to space
- sector size is 0x800 bytes
- writeable unit size is 0x8 bytes
- flash start address is 0x0
- total ADuCM3029 on chip flash size is 0x40000 bytes
- total ADuCM4050 on chip flash size is 0x7F000 bytes
Set buffer for 1 sample in analogin_read_u16. Before it assumes the
buffer is set outside by the higher layer. Now it's temporarily
located on the stack since only the ADC value is returned.
Ensure all instance memory blocks meet 4 byte alignment requirement
without relying on compiler's or liker's optional settings:
- gpioMemory[] for adi_gpio_Init()
- aRtcDevMem0[] for adi_rtc_Open()
- i2c_Mem[] or I2C_Mem[] for adi_i2c_Open()
- spi_Mem0[], spi_Mem1[], spi_Mem2[] or SPI_Mem[] for adi_spi_Open()
- Added curly brackets to single line conditions in gpio_qpi.c and gpio_irq_api.c;
- Changed rx and tx buffers in serial module as local variables;
- Minor i2c & spi updates for github pull request;
- Added function definition for spi_master_block_write.
- Added a configuration call in trng_init to make sure the TRNG buffering mode is disabled, so only 8-bit bytes are returned;
- Moved the TRNG device handle into the trng_t structure;
- Fixed some formatting errors in the adc driver.
Edmund Hsu
Dave Wu