I modified the debug message when using LWIP in RZ/A1 related mbed boards.
In eth_arch_enetif_init(), sys_thread_new() was called and task name is appeared as debug information, but task name for debug was a mistake.
For LWIP communication speedup in RZ_A1 related, I changed the below macro value and added the definition processing in RZ/A1 related header file(lwipopts_conf.h). For this reason, those macros are overrode by RZ/A1 related values, not default values.
In the below "features/FEATURE_LWIP" folders, same as Cortex-M targets, I changed the folder structure to combine files that can be shared as RZ/A1 related. And I renamed the folder name to "TARGET_RZ_A1XX" in order to make commonality explicit.
- "features/FEATURE_LWIP" folder
<before>
\features\FEATURE_LWIP\lwip-interface\lwip-eth\arch\TARGET_RZ_A1H
\features\FEATURE_LWIP\lwip-interface\lwip-eth\arch\TARGET_VK_RZ_A1H
<after>
\features\FEATURE_LWIP\lwip-interface\lwip-eth\arch\TARGET_RZ_A1XX
Call underlying HAL implementation to enter critical section/disable interrupts
before incrementing the global critical section counter.
Modify HAL implementations to track first entrances to the critical section and
only update the saved state on first enter.
Take SHA1 for example, without the fix, SHA H/W is not stopped in either case:
(1) ctx->total == 0 in mbedtls_sha1_hw_finish()
(2) mbedtls_sha1_hw_finish() is not called by upper layer
For example, even though MBEDTLS_SHA512_C is disabled (via #undef MBEDTLS_SHA512_C),
mbedtls_sha512_context is still necessary due to referenced in sha512.h.
Currently, trng_api.c is located in targets/ and AES/DES/SHA alter. are located in mbedtls/.
They have shared crypto code.
If they could locate at same location e.g. mbedtls/, the shared crypto code placement would be more reasonable.
Add counter to track crypto init among crypto sub-modules. It includes:
1. Enable crypto clock
2. Enable crypto interrupt
As counter gets zero, crypto clock is disabled to save power.
1. aes.h/des.h/sha1.h/sha256.h/sha512.h includes config.h before aes_alt.h/des_alt.h/sha1_alt.h/sha256_alt.h/sha512_alt.h.
2. aes_alt.h/des_alt.h/sha1_alt.h/sha256_alt.h/sha512_alt.h should not be included in any other location.
3. Just include aes.h/des.h/sha1.h/sha256.h/sha512.h in aes_alt.c/des_alt.c/sha1_alt.c/sha256_alt.c/sha512_alt.c.
1. aes.h/des.h/sha1.h/sha256.h/sha512.h includes config.h before aes_alt.h/des_alt.h/sha1_alt.h/sha256_alt.h/sha512_alt.h.
2. aes_alt.h/des_alt.h/sha1_alt.h/sha256_alt.h/sha512_alt.h should not be included in any other location.
3. Just include aes.h/des.h/sha1.h/sha256.h/sha512.h in aes_alt.c/des_alt.c/sha1_alt.c/sha256_alt.c/sha512_alt.c.
This was a small hole in the logic that handles initializing the
lookahead buffer. To imitate exhaustion (so the block allocator
will trigger a scan), the lookahead buffer is rewound a full
lookahead and set up to look like it is exhausted. However,
unlike normal allocation, this rewind was not kept aligned to
a multiple of the scan size, which is limited by both the
lookahead buffer and the total storage size.
This bug went unnoticed for so long because it only causes
problems when the block device is both:
1. Not aligned to the lookahead buffer (not a power of 2)
2. Smaller than the lookahead buffer
While this seems like a strange corner case for a block device,
this turned out to be very common for internal flash, especially
when a handleful of blocks are reserved for code.
This bug was a result of an annoying corner case around intermingling
signed and unsigned offsets. The boundary check that prevents seeking
a file to a position before the file was preventing valid seeks with
positive offsets.
This corner case is a bit more complicated than it looks because the
offset is signed, while the size of the file is unsigned. Simply
casting both to signed or unsigned offsets won't handle large files.
The API is as per posix standard, but does not provide stats for file/directory.
Stats buffer (block size, total block count, free block count) is filled for
entire mounted filesystem.
Merged from the existing TARGET_DISCO_F413ZH code (which has the same MCU)
and TARGET_NUCLEO_F412ZG code (which has the same Nucleo-144 board and
pinout).
Update the code to check all addresses for all interfaces. Move
the code from mbed_lwip_socket_bind() to a new function called
mbed_lwip_is_local_addr()
Return NSAPI_ERROR_PARAMETER when:
Binding to a non-local address
Socket listen() is called without calling bind() first
Socket accept() is called without calling listen() first
The K64F Ethernet driver installs an interrupt handler that sets thread
flags, and this could be called before the thread was initialised, so it
would use a NULL thread ID.
This triggers an RTX error-checking trap in debug builds, and could also
lead to other problems with received packets not being processed.
Adjusted so the RX interrupt handler does nothing if the thread isn't
initialised yet, and manually trigger a RX event flag after initialising
the thread in case any interrupts were ignored.
An alternative would have been to implement eth_arch_enable_interrupts,
but this mechanism is not present in the EMAC world - drivers will have
to start returning interrupts in their power up.
Fixes#5680
When specifying a full channel mask in .lib and setting the channel
to zero, device does proper channel scan.
For Thread, channel must be specified for router.
Sleepy devices don't respect the channel settings but do a full channel
scan at the start.
+ Modified the channel mask print to use hex.
ExhaustibleBlockDevice.h
- Fix typos for consistent spelling.
ObservingBlockDevice.h
- Fix typos for consistent spelling.
ReadOnlyBlockDevice.h
- Fix typos for consistent spelling.
README.md
- Fix typos, mostly for branding.
DESIGN.md
- Make minor changes for consistent spelling and precise language.
SPEC.md
- Make minor changes for consistent spelling and precise language.
README.md
- Make minor changes for consistent spelling and precise language.
Not all devices have enough heap to fit a simulated heap block device,
however using a simulated heap block device is preferred if available
(reduced flash wear, faster testing).
Added MBED_TEST_SIM_BLOCKDEVICE for tests that only need a simulated
block device (wear_leveling + resilience), and added support for targets
that are known to have enough heap.
GattServer::write on Nordic's targets use sd_ble_gatts_hvx to send an
handle value Notification or Indication; This function can fail if the
connection handle is invalid or if Updates are not enabled for this
connection.
This patch workaround those limitations.
Need to avoid a TX packet error from messing up the TX FIFO. Since this API will return busy if a packet is in transmission anyways, this is acceptable.
Unfortunately there are several issues colluding to force the timeout
this high.
1. The tests push littlefs to the limits of how many errors it can
handle before failing. As a side effect this causes a massive amount
of debug/warn/error logging about the situation.
2. The logging can't be turned off for specific tests. Note: This might
change with the introduction of test-configs.
3. Logging is fixed to a baud rate of 9600. Previous testing was carried
out with a baud rate of 115200, which is the reason for the original
timeout.
Previously, send() was somewhat soft - it only ever made one send
call to the underlying stack, so it would typically take as much data
as would fit in the buffer, and only block if it was unable to write
anything.
This is not the intent of a POSIX socket/filehandle write. It should try
to send everything if blocking, and only send less if interrupted by a
signal:
- If the O_NONBLOCK flag is clear, write() shall block the calling
thread until the data can be accepted.
- If the O_NONBLOCK flag is set, write() shall not block the thread.
If some data can be written without blocking the thread, write()
shall write what it can and return the number of bytes written.
Otherwise, it shall return -1 and set errno to [EAGAIN].
This "send all" behaviour is of slightly limited usefulness in POSIX, as
you still usually have to worry about the interruption possibility:
- If write() is interrupted by a signal before it writes any data, it
shall return -1 with errno set to [EINTR].
- If write() is interrupted by a signal after it successfully writes
some data, it shall return the number of bytes written.
But as mbed OS does not have the possibility of signal interruption, if we
strengthen send to write everything, we can make applications' lives
easier - they can just do "send(large amount)" confident that it will
all go in one call (if no errors).
So, rework to make multiple sends to the underlying stack, blocking as
necessary, until all data is written.
This change does not apply to recv(), which is correct in only blocking until
some data is available:
- If O_NONBLOCK is set, read() shall return -1 and set errno to [EAGAIN].
- If O_NONBLOCK is clear, read() shall block the calling thread until some
data becomes available.
- The use of the O_NONBLOCK flag has no effect if there is some data
available.
The index field of FATFS_DIR does not encapsulate all the context
required to reposition the directory traversal. ChaN provides
f_rewinddir() but no directory seek, so rewind if necessary then step
through until the desired index is reached.
This patch includes:
* Documentation update.
* Code simplification and correctness; the value overloads based on the
size of the hrm counter has been removed in favor of runtime check which
is more correct.
* The control point characteristic has been removed since HeartRate value
byte does not support the accumulated energy expanded.
Steven Cartmell
Tero Heinonen
TomoYamanaka
ccli8
Jimmy Brisson
Vincent Coubard
Christopher Haster
gorazd
Deepika
Adam Heinrich
Anna Bridge
Cruz Monrreal II
Ashok Rao
Martin Kojtal
Juha Ylinen
Kevin Bracey
Seppo Takalo
Mika Leppänen
Arto Kinnunen
Ryan Kurte
Abdelhak Bougouffa
paul-szczepanek-arm
Steven Cooreman
bcostm
Amanda Butler
Mahadevan Mahesh
jeromecoutant
Colin Hogben
Steven Cooreman
Bartek Szatkowski