Time drifting test cases use serial communication with the host and are unstable on CI.
Skip time-drifting test cases if SKIP_TIME_DRIFT_TESTS macro is defined.
The idea for the future is to use FPGA test shield for timing tests instead of host scripts.
Also remove `__ARM_FM` macro which in most cases was used to disable time drifting tests. In other cases replace `__ARM_FM` with `TARGET_ARM_FM` which is more suitable.
Deprecate wait() in favour of acquire(), try_acquire(),
try_acquire_for() and try_acquire_until().
Brings Semaphore more into line with CMSIS-RTOS 2 (which uses "acquire"),
itself (as it has "release"), and other classes having "try", "try for"
and "try until".
Also steps away from vague "wait" term - the primary operation here is
to acquire the semaphore, and this will of course sleep.
due to partial implementation. Having FUTURE_SEQUANA_M0 and
FUTURE_SEQUANA PSA targets is misleading.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@arm.com>
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
The thread stack size was restricted due to some boards have really limited RAM sizes,
and out of heap memory on multiple threads tests.
The side effect was on the debug profile build, the tests will get stack overflow.
We need the build the test with debug profile in order to do the code coverage analysis.
So increased the thread stack size on FastModel targets.
Since target specific ticker drivers are not ready also features which uses ticker in upper layers may not work correctly and tests for these features.
We need to disable also failing higher level ticker related tests (by adding check if DEVICE_USTICKER symbol is available and raise #error [NOT_SUPPORTED] if not).
In pararell threads of "thread" test is a simple thread, but it seems that there is a difference in the stack used between Cortex-A and Cortex-M.
As a result of check, in Cortex-A, program aborts because of the lack of stack when PARALLEL_THREAD_STACK_SIZE is 384, workes properly when PARALLEL_THREAD_STACK_SIZE is 512 at least.
Remove the direct use of the microsecond and low power ticker from
the tests. This enforces that sleep mode is properly locked when
using timers. Furthermore, this prepares the codebase for new ticker
changes which allow differing clock frequencies and timer bit widths.
Reduce RAM consumption so all tests can still be built when using
CMSIS/RTX5. Also reduce clutter by removing the per target stack size
defines in the tests.
Previously, the RTOS threads test was conditionally change the thread
stack size for all test cases based on the target. Now, it uses the
default stack size for all targets when threads are created serially,
and uses a 512 byte stack for the threads that are created in parallel.
threaded.
For mbed micro, if the MBED_RTOS_SINGLE_THREAD is defined then the
compilation of the test will fail with the info
[NOT_SUPPORTED] test not supported
This patch bring this behavior to mbed-os RTOS tests.
This commit adds the following test frameworks:
- `greentea-client` (https://github.com/ARMmbed/greentea-client)
- This framework provides a key-value api for communicating with the
greentea test tool (https://github.com/ARMmbed/greentea)
- `unity` (https://github.com/ARMmbed/unity)
- This framework provides test assert macros that can be used when
writing test cases
- `utest` (https://github.com/ARMmbed/utest)
- This framework allows you to execute a series of test cases with
reporting that works with the greentea test tool
(https://github.com/ARMmbed/greentea)
The following changes were made when bringing these frameworks into the
tree:
- References to `mbed_drivers/mbed.h` within utest's tests were migrated
to `mbed.h`
- The yotta file `module.json` was removed from `greentea-client` and
`unity`
- `coverage.json` was also removed from `greentea-client`
- `.gitignore` and `.gitattributes` were removed from `greentea-client`
- Apache 2.0 license files were removed from `greentea-client`
This also brings in a number of tests that have been newly written or ported from various sources:
- `TESTS/integration` - Very basic tests, used to check if testing frameworks are working correctly
- `TESTS/mbed_drivers` (Thanks @PrzemekWirkus!) - TESTS ported from mbed OS 3.0 (https://github.com/ARMmbed/mbed-drivers)
- `TESTS/mbedmicro-mbed` (Thanks @PrzemekWirkus!) - Tests that weren't covered by `TESTS/mbed_drivers` that currently live in `libraries/tests/mbed`
- `TESTS/mbedmicro-rtos-mbed` (Thanks @PrzemekWirkus!) - Ported tests that currently live in `libraries/tests/rtos/mbed`
- `TESTS/storage_abstraction` (Thanks @rgrover!) - Tests for the storage_abstraction hal
int_szyk
Przemyslaw Stekiel
Martin Kojtal
Kevin Bracey
Devaraj Ranganna
Oleg Kapshii
Oren Cohen
Cruz Monrreal
Qinghao Shi
David Saada
ccli8
TomoYamanaka
Maciej Bocianski
Martin Kojtal
Deepika
Russ Butler
Christopher Haster
Bartek Szatkowski
Brian Daniels
Steven Cooreman
Rob Meades
Mike Fiore
Sam Grove
jeromecoutant
Vincent Coubard