- code refactoring and preparation for enabling DPI/QPI tests
- reduced multiple test count to 4
- use common flash config header for all MX25RXX35F chips
- fix sector erase max time on N25Q128A
Main idea of introduced changes is to ease adding support for new flash chips
Major changes:
- move implementation of all memory chip specific functions to memory config file (no weak functions)
- add support for 1-2-2 write
To handle timer rollovers the test tests-mbed_hal-common_tickers_freq
calls intf->set_interrupt(0). For this to work correctly the ticker
implementation must fire an interrupt on every rollover event though
intf->set_interrupt(0) was called only once. Whether an interrupt will
fire only once or multiple times is undefined behavior which
cannot be relied upon.
To avoid this undefined behavior this patch continually schedules an
interrupt and performs overflow detection on every read. This also
removes the possibility of race conditions due to overflowCounter
incrementing at the wrong time.
FastModels targets are simulator running on the x86 hosts.
As the nature of non-RealTime x86 OS and FastModels, timing accuracy is not guaranteed
So skipping the time drifting tests on FastModel targets
When the define LPTICKER_DELAY_TICKS is set deep sleep can be randomly
disallowed when using the low power ticker. This is because a Timer
object, which locks deep sleep, is used to protect from back-to-back
writes to lp tickers which can't support that. This causes tests which
assert that deep sleep is allowed to intermittently fail.
To fix this intermittent failure this patch adds the function
sleep_manager_can_deep_sleep_test_check() which checks if deep sleep
is allowed over a duration. It updates all the tests to use
sleep_manager_can_deep_sleep_test_check() rather
than sleep_manager_can_deep_sleep() so the tests work even if deep
sleep is spuriously blocked.
This is solution to issue #7724.
Ticker free tests have been removed since ticker free function has been implemented only for CI boards.
Implementation for the remaining platforms will be done on feature branch feature-hal-ticker-free.
In `ticker speed` test case execution time of ticker API functions is measured using Timer object. Test replaces original ticker handler for testing purposes, so test should not relay on higher level ticker based features(like Timer).
Use low level ticker API for time measuring.
In mbed-os-tests-mbed_hal-common_tickers/Microsecond ticker overflow test, some targets
would fail to catch specified ticker value near overflow in time and so fail. This commit
alleviates the issue by checking ticker value range rather than one exact ticker value near
overflow.
Serial buffer must be flushed before entering deep sleep mode. In the test this is done by the additional delay which is implemented on the busy loop which decrements given value down to 0 (`void wait_cycles(volatile unsigned int cycles)`). This solution is not appropriate since it is very target specific and the cycles value has been already increased few times. Additionally very big number of loop cycles which is suitable for fast targets may take much longer on slower boards and results in test timeout.
It has been verified that 20ms is sufficient delay for the green-tea transmission. In this test we cannot simply use `wait_ms(20)` since this potentially may put board to sleep and wake up using lp ticker. The test re-initialzies the lp ticker(disables ticker interrupt) and this operation may break the schedule and time tracing by the upper layer. But we can use us ticker which is not affected by this test. The solution is to add a delay routine based on busy loop and us ticker only. This way are able to wait exactly 20 ms.
As we do not include rtx_lib header file anymore, these symbols are not available.
Use core util for if ISR is active. And for OS tick, pull in os_tick header file.
Mark mbed-os-tests-mbed_hal-common_tickers/time_cpu_cycles not in-lined.
Otherwise, time_cpu_cycles may be in-lined somewhere and takes different
CPU cycles on invocation.
Increases tolerance value for sleep_usticker_test to cover extra time needed
for cpu stats computation (for more details see MBED_CPU_STATS_ENABLED).
Prevent scheduling interrupt during ticker initialization (in lp_ticker_init)
while test execution.
In case when base tick count is different than next tick count check first if the difference is equal to 1 tick (this is what we are looking for) if not then decrease the tick count.
Repeat counting process few times before incrementing the number of cycles in case when base tick count is equal to next tick count.
ccli8
Maciej Bocianski
Cruz Monrreal
Martin Kojtal
Steven
Qinghao Shi
Ben Cooke
Russ Butler
Przemyslaw Stekiel
Anna Bridge
David Saada
Marc Emmers
Bartek Szatkowski