After reset the MCR register content needs to be restored so we're
introducing the can_registers_init function to be called at the first
init stage, but also after reset. We also store the can frequency to
go through the initialisation phase again.
Instead of a static object, this will make driver
instantiation more robust and allow to re-use init
configuration on a need basis.
The CANName struct member is actually the CAN registers base address,
which is now available in the CanHandle.Instance field, so we don't need
CANName anymore.
Users of FlashIAP usually get the minimum programable size
by calling flash.get_page_size(), so let's return the minimum
to allows a most efficient usage of flash.
For F4 devices, this is 1 byte.
For L0 and L1 devices, this is a word (4 bytes).
For L4 devices, this is a double word (8 bytes).
First add the flash_data.h that describe the flash memory topology,
and also activate FLASH support for the corresponding targets.
This is a 1,5MB flash memory device which contains 15 sectors, where
sectors 12 to 15 are 128KB sectors. So flash_api.c needed has been
updated to differentiate between this flash memory and the 2MB ones
by checking existence of sector 16 instead of sector 12.
UBLOX_ODIN_EVK_W2 is missing the abstract button definitions originally
introduced with PR https://github.com/ARMmbed/mbed-os/pull/4249.
Fix two tab to spaces issues on the go as well.
On F410RB, the size reserved to vectors with ARM toolchains was not properly
defined,which was not the case for other toolchains.
This would cause few tests to fail like EXAMPLE_1 with below error:
HOST: Unknown property: mbed assertation failed: _ptr == (T *)&_data, file: C:/github/mbed/BUILD/mbed/platform/SingletonPtr.h, line 91
Use ADDR_FLASH_SECTOR_12 as this is defined by target (the flash size varies, for
instance for some F437xx is up to 2MB (2nd bank might not be there)).
In this commit, the analogin_s structure is moved to commonn_objects.h file
to limit the duplicaion.
The ADC handle is moved from a global variable to a struct member of the
analogin object. This allows multiple ADC instances to work correctly.
Note that State needs to be explicitely set to HAL_ADC_STATE_RESET
because the object is not zero initialized.
TXE indicates that a byte can be written to UART register for sending,
while TC indicates that last byte was completely sent. So the TXE flag
can be used in case of interrupt based Serial communication, to allow
faster and efficient application buffer emptying.
Also TXE flag will be erased from the interrupt when writing to register.
In case there is nothing to write in the register, the application is
expected to disable the interrupt.
The RXNE flag is getting cleared when reading Data Register so it should
not be cleared here. Especially in case of high data rate, another byte of
data could have received during irq_handler call and clearing the flag
would read and discard this data which would be lost for application.
Jimmy Brisson
Laurent MEUNIER
Martin Kojtal
Jan Jongboom
Kevin Gilbert
Wolfgang Betz
Janne Kiiskilä
bcostm
jeromecoutant
adustm
Rob Meades
andreas.larsson