* Remove unused Peripheral Pins definitions and add UART_1 TXD/RXD pins (fix#9026) for the Wio 3G board
* Remove/Fix unused PinName definitions for the Wio 3G board from the PinNames enum
SharedPtr::reset did not actually set the stored pointer value.
Correct this, with other minor tidies:
* Ensure counter is set to NULL if pointer is reset to NULL
* Be consistent about not clearing pointers in decrement_counter().
As per the IAR Development guide, below options for CPU are valid
1. Cortex-M33
2. Cortex-M33.no_dsp (core without integer DSP extension)
3. Cortex-M33.fp (floating-point unit with support for single precision)
4. Cortex-M33.no_se (core without support for TrustZone)
5. Cortex-M4
6. Cortex-M4F
7. Cortex-M7
8. Cortex-M7.fp.dp (floating-point unit with support for double precision)
9. Cortex-M7.fp.sp (floating-point unit with support for single precision)
All tests will run for each storage component available on device excapt for test_get_type_functionality that will run once on the default blockdevice.
Below are the options read from the toolchains/arm
armclang --target=arm-arm-none-eabi -mcpu=list
The following arguments to option 'mcpu' can be selected:
-mcpu=cortex-m0
-mcpu=cortex-m0plus
-mcpu=cortex-m1
-mcpu=cortex-m3
-mcpu=cortex-m4
-mcpu=cortex-m7
-mcpu=cortex-m23
-mcpu=cortex-m33
...
armlink --cpu=list
The following arguments to option 'cpu' can be selected:
--cpu=Cortex-M0
--cpu=Cortex-M0plus
--cpu=Cortex-M1
--cpu=Cortex-M1.os_extension
--cpu=Cortex-M1.no_os_extension
--cpu=Cortex-M4
--cpu=Cortex-M4.no_fp
--cpu=Cortex-M7
--cpu=Cortex-M7.fp.sp
--cpu=Cortex-M7.no_fp
--cpu=Cortex-M23
--cpu=Cortex-M33
--cpu=Cortex-M33.no_fp
--cpu=Cortex-M33.no_dsp
--cpu=Cortex-M33.no_dsp.no_fp
...
armclang --target=arm-arm-none-eabi -mfpu=list
The following arguments to option 'mfpu' can be selected:
-mfpu=fpv4-sp-d16
-mfpu=fpv5-sp-d16
-mfpu=fpv5-d16
...
Util was common test folder, which was kept outside as we had
no mechanism to have common files for various tests in tools.
Now same can be achieved by having COMMON folder inside tests
directory
Don't allocate the sector map array in this function,
as it was buggy and redundant. Separate user config vs. automatic allocation
cases instead (which was essentially the case anyway).
In addition, fix tests to get over failures in low end boards
This testcase uses Socket in blocking mode, and therefore
WOULD_BLOCK should not be accepted.
The logic was wrong anyway, because return value was tested
to be negative before testing with WOULD_BLOCK which is negative
as well.
Also replaced TEST_FAIL() macro with TEST_ASSERT_EQUAL() to
make the return code visible in test log.
Set tasklet parameters before connecting to prevent the parameters to be set to 0.
The tasklet parameters are reset to 0 when wisun_tasklet_connect gets called,
thus those need to be set in the wisun_tasklet_configure_and_connect_to_network
before they are used. This is also done this way in other tasklets.
jeromecoutant
Yoshihiro TSUBOI
Kevin Bracey
Russ Butler
Brian Daniels
deepikabhavnani
Senthil Ramakrishnan
Leszek Rusinowicz
Michal Paszta
Rob Vlaar
Amir Cohen
Andriy.Lishchynskyi
Jimmy Brisson
David Saada
Marcin Tomczyk
Seppo Takalo
Jarno Lamsa
paul-szczepanek-arm