In the reception data path, we needed to check the MCPS CONFIRMATION type
not the MCPS INDICATION type. Indication message type is for downlink message type
which can be UNCONFIRMED even if we have sent a CONFIRMED one, e.g., an ACK.
Fixes error: IOTCLT-2506 [GitHub] Cannot set registration time if server does not use max age option
Improvements; Extend blockwise message transfer status to have states for sending as well.
NOTE! These are internal changes required for cloud client. This has no direct relevance to any mbed-os functionality.
Our config file for lwIP had TCP_QUEUE_OOSEQ disabled - this can
cause significant performance problems, as observed during testing.
One lost packet can lock an input stream into a mode where the
transmitter keeps thinking packets are being lost, so keeps slowing
down. This caused test failures - a transfer that would normally
take 10s hit a 60s timeout.
Turning this on increases code size, but doesn't significantly increase
static memory use. The memory used for out-of-order packets comes from
the same pbuf pool as for outgoing TCP segments, so there is contention
when running bidirectionally.
Out-of-order processing is on by default for lwIP - this seems to be
another example of us excessively paring it back.
Application can give battery_level callback method what Lora stack
uses to query battery level for DevStatusReq MAC command response.
The problem was that this callback was never called.
This commit fixes this problem and if application does not set
battery_level callback at all, value 255 (= The end-device was not able to
measure the battery level.) will be returned to lora gateway.
The unified NRF51 target and feature BLE directories have been
reorganized to follow the naming and directory structure of the
NRF52 implementation.
This reorganization does not include TARGET_MCU_NRF51822 and
derived targets.
If the frame length is not what we are expecting, it is
found to be a good practise to actually continue with what we
have received rather than aborting. As we have already demodulated
the packet and RX slots are used up, ther is not so much benefit in
dropping that packet.
While configuring RX parameters for the radio, we need to feed in
rx windows 1 and 2 parameters which are computed when we do the transmission.
We are actually setting the physical value of the data rate rather than
data rate table index and the expectation was to set the data rate index.
The asia pacific region supports custom channel planning and
downlink channel request. By virtue of a mistake, this information
was missing and hence a custom channel support was not working.
Fixes issue #6783.
There had been essentially two state machines running in our stack
which was too cumbersome and was not alligned in any symmetry.
In this work we make sure that:
* There are no callbacks from the MAC layer to Stack controller layer.
* Primitives are made local to the mac layer and are presented as
read-only to the stack controller layer.
* Interrupt handling and processing is moved to the stack controller layer.
* Reception is divided into smaller units, seperating handling of Join Accept
and normal data frames. MIC gets its own unit.
* Extraction of data and MAC commands from the payload is also being done now in
its own method.
* To ensure integrity of the stack, and sanctity of the radio payload, we copy the
radio payload buffer immediately in the rx interrupt and hoist a flag that prevents
another interrupt from happening for a short while when we are processing the previous
packet.
* If an automatic uplink is on going, we do not send a TX_DONE event to application
anymore as that is logically incorrect.
* state_controller() is the central engine for the state machine. To save code space and
memory, we are not handling each and every state in the state_controller(). Some of the states
which have no processing to be done, are explicitely set.
* For all the states who need special processing, seperate methods are added.
* Class A always run to completion to IDLE and CLass C always runs to completion as RECEIVING.
Making our LoRaWAN stack thread safe. If RTOS is not present, locks
don't do anything. ScopedLock is used to automate the lock release on
context expiry.
We went through an exercise of adding band information to
any new channel being added. Default channels were looked over.
This commits duly adds missing band information to default channels.
The procedure should be terminated whenever the server returns an error not equal
to ATTRIBUTE_NOT_FOUND. The block was effectivelly terminated but the
procedure was not. As a result the discovery was operating on already
freed memory.
If Lora stack is built with incorrect mbedtls settings, crypto methods
should assert and return error value. This fixes MBED_ASSERTs to
work correctly.
Now application can call connect and disconnect multiple times and resources are freed and constructed properly.
Also whole easycellular can be deleted and constructed again.
Cruz Monrreal
Hasnain Virk
Antti Yli-Tokola
Kevin Bracey
Kimmo Vaisanen
Martin Kojtal
Steven Cartmell
Marcus Chang
Vincent Coubard
Teppo Järvelin
Brendan McDonnell
Mirela Chirica