Change signature from:
function(gen_upload_target TARGET_NAME BIN_FILE HEX_FILE)
To:
function(gen_upload_target TARGET_NAME BINARY_FILE)
If OUTPUT_EXT is undefined or defined to "bin", BINARY_FILE is .bin file,
otherwise .hex file.
The update applies to all UploadMethodXxx files.
In OpenOCD flash, if OUTPUT_EXT is defined in targets.json5, use image
file with this extension <target>.<OUTPUT_EXT> for flash, or default
to <target>.elf.
In Mbed flash, if OUTPUT_EXT is defined in targets.json5, use image
file with this extension <target>.<OUTPUT_EXT> for flash, or default
to <target>.bin.
* add targets H503xB and H563xI
* add STM32H5 basic stettings and drivers
* Necessary modification in STM32 family drivers for STM32H5 family
* targets.json5 modified for STM32H503xB and STM32H563xI
* Prototype Upload methods for Nucleo boards of STM32H5 family
* fix typo
* typo fix
* Add images for H5 targets
* cmsis_mcu_desc fix
* targets.json fix
* merge all clock files to one
* Enable Mbed upload method
* fix mcu_family_target
* fix for clock settings
* move - device remove list to family level
* fix targets.json
---------
Co-authored-by: Jan Kamidra <odiin@windowslive.com>
* Remove unavailable and EOLed target boards - STM32
* Make CI detect any missing MCU descriptions
* Oops fix CI syntax
* Aaand add those MCUs
* Also remove "orphaned" cellular modem COMPONENTs
* Start adding CMSIS MCU description tool
* Add 'add-missing'
* Switch MCU descriptions to JSON5
* Add new MCU after rebase
* Use virtualenv instead of APT for installing packages
* Also remove apt requirements files
* Wrong command!
* Check if index file exists before checking update time
* Respond to comments
* Make must_exist keyword only
---------
Co-authored-by: Victor Tang <me@victorwtang.dev>
* Fix PWM API for reading microseconds on LPC1768
* Fix semihosting related compile errors, fix pwm deinit
* Fix some mistakes, fix PWM frequency adjustment
* Fix a few more issues
* Various updates to support targets & drivers site generation
* Add regression test for python code, add links to README
* Don't need to duplicate device_name
* Fix typo and some extra commas
* Rephrase docs
* Fix NUCLEO_H743ZI clock config not enabling overdrive mode
* Update most STM32H7 devices to new clocking configuration
* Fix ADC clock for old chip revs
* Fix CAN clock, finish clocking for 280MHz devices
* Fix a few typos and such
* A few more targets.json tweaks
* Fix comma
* Use a virtual environment for Python packages by default
* Install python3-venv in CI
* Don't use sudo
* Oops missed a "STATUS"
* Fix second build dir not using venv
* Update FindSTLINKTools.cmake for STM32CubeCLT
STM32CubeCLT
* correction
* line 7 reverted
* Lines 28-29 rewritten to lowercase letters
* Update for Linux
* Change file name for Windows
* revert back components names
* change file name also for Linux
* Fix USB instructions for Ubuntu, fix greentea compile failure for devices without TRNG
* Don't compile device key without COMPONENT_FLASHIAP
* Fix some upload issues for LPC1768
* Oops don't commit cmake variants
* Don't build connectivity-netsocket-tls without TRNG support
* Start on STM32 DMA SPI
* Update all objects.hs, add interrupt function
* Initial DMA code should be ready to test out...
* Fix SPI interrupt-mode IRQ handlers, add SPI::transfer_and_wait
* Fix CMake error when building for STM32WL processors
* Now builds on all STM devices!
* Properly support STM32U5 / DMA IP v3
* Start on STM32F4 support, fix hardfault on IP v1 and v3 due to incorrect indexing
* Fix Rx-only transfers, add abort code, fix incorrect channel assignments for DMA IP v1 devices
* Start on STM32H7 SPI DMA
* Fixes for H7: Correctly manage data cache, keep SPI ISR enabled
* Implement DMA SPI header constants for all remaining STM32 families. Also add support for freeing DMA channels
* Try and fix build on STM32G0
* Fix build on STM32G0
* Add SPI_32BIT_WORDS label, start on fixing SPI docs
* SPI: Implement reference counting so that DMA channels get freed properly
* Fix issue where SPI data could get corrupted (by TI mode turning on) depending on memory layout (if your spis pointer & 0x10 was nonzero)
* Mark DMA channels as unallocated when SPI bus is freed
* Simplify spi_abort_asynch()
* Fix some rebase issues, fix failing to allocate DMA channel on STM32U5
* Fix DMA getting stuck on STM32F4, F7, and F2
* Initial import of python packages
* Move tests to subfolder, use tests in generate_configuration.cmake
* Bring python packages into the source tree instead of needing to be installed separately
* Use python3
* Just use distro default python
* Install all the requirements with apt-get
* unittests is part of Python now
* Add appdirs, set python version
* Add some missing dependencies
* Add more packages
* Add requirements.apt.txt files, fix relative paths with scancode_evaluate.py
* Fix return code handling for license scan errors
* ok let's try that again, also improve error output from scancode evaluate
* Add missing license headers
* Refactor flash setup for MIMXRT105x devices, adds flash support for MIMXRT1062 EVK
* Remove commented code
* Use BOARD_FLASH_SIZE in boot headers
* Fix setting which should be disabled in run mode
* Remove old pico SDK, import latest version using new importer script
* Add new importer script, update CMakeLists
* Merge changes from newer SDK into init assembly and linker script
* Update pico hal code for new SDK version
* Clean up linker script a bit, revert ram size
* Fix accidental breakage of watchdog-reset test from warning fixing! Also better document USB setup procedure and disable reset as part of the test runner.
* Attempt to fix declaring an OSPIFBlockDevice as a global object
* Astyle format
* Add B_U585_IOT02A upload method support and default OSPIF mappings. Guard against incorrect case on upload method
* Also fix the same error in QSPIFBlockDevice
* Fix compile error for mbed-wifi
* Provide ScopedMutexLock for unittests mode
* Add PICO SDK
* Add RP2040 HAL implementation
* Add target Raspberry Pi Pico and its Upload method
* Modified PICO SDK-RTC because of conflict in name
* Use USB from boot, fix USB linking
* Try removing redundant init call
* Add SWD upload configuration, copy most init code from Pico SDK
* Fix RTC linking, fix ram size constant, fix test warning
* Add upload support for RPi Pico devices using Picotool
* Fix implementation of Tx IRQ for serial ports. BufferedSerial works now!
* Make PinNames.h pass pin validation
* Fix us ticker not working when debugging
* Fix us ticker double-init and manual fire interrupt function, us ticker tests now pass!
* Fix writing to rtc and rtc double-init, RTC tests now pass (except rtc-reset)
* Fix panic() not working from a critical section or ISR
* Fix compile failure due to extra LED1 definition
* Fix style
* Fix flash_api detection of invalid parameters, fix reset_reason to advertise the correct capabilities and implement them correctly
* Fix watchdog test warnings, fix broken hal_watchdog_get_reload_value(), fix missing frequency field in watchdog features
* Fix watchdog_reset failing to compile on some devices
* Fix us ticker fire_interrupt() not being callable from an ISR
* Fix incorrect license header
---------
Co-authored-by: Johnk1987 <odiin@seznam.cz>
* Start porting to Teensy 4.1, also fix some compiler warnings in FSL HAL
* Add hardware init for Teensy, refactor phy drivers, rework IMX EMAC autonegotiate code
* Revert some testing changes
* Fix incorrect phy address used outside of low_level_init_successful()
* Ethernet operational!
* Turn off DEBUG_IMX_EMAC
* Style fixes
* Style again
* Bugfix: mbed_lib.json files in project source dir were not getting picked up
* Bugfix: CLion debug configurations not generated properly due to variables going out of scope
* Support Teensy OTP MAC address
* Change all debug configurations to not reset and exit on error. Initial tasks.json implementation.
* st-util working on command line and VS Code!
* Convert STM32CUBE, fix spaces in GDB server task command
* pyocd working!
* Convert OpenOCD
* Convert JLINK
* Convert REDLINK upload method
* Fix CMake typo
* Try and fix some variable scope issues
* Initial CLion implementation. Need to test with hardware.
* Add a separate task that kicks off a build before each debug session
* Fix incorrect image length in header preventing boot
* Fix ncache region being located in SEMC even on boards without it
* Don't reserve RAM for ncache anymore
* Fix crash when activating BufferedSerial on Teensy D0 and D1. Also fix incorrect daisy register mapping.
* Fix missing space in linker script
* Start on fixing incorrect MIMXRT clock frequency
* LPM working!
* Clean up LPM and clocking
* Add teensy model identifier
* Fix license headers
* Initial attempt at Teensy 4.0 support
* Hide internal target
* Fix some targets.json issues, add boot code for the MIMXRT1060_EVK. It boots but tests aren't able to run properly yet.
* Disable LPTICKER on MIMXRT1060, fix pin names for newer dev kits
* Enable MIMXRT106x ethernet
* add custom linker script
a custom linker script can be applied by adding the .ld filepath
as 2nd argument to mbed_set_post_build
* more detailed comment
* add if is_standalone for text cases
* replace COMMENT in add_custom_command by echo
COMMENT is not reliable printed
* Add upload target for Arduino Nano 33 BLE, fix linker script preprocessing, add option for USB serial by default
* astyle error
* Use HINTS instead of PATHS so that the Arduino dir is searched first
* Enable OpenOCD and PyOCD for Nano 33 BLE in SWD mode
* Fix missing dependency for USB tests on Windows
* Add RAM defines for nrf52840
* Fix mbed-storage-kv-config depending on SD card library even if said library was not enabled
* Update dsrdtr value
* No longer need to modify linker script now that we aren't using whole-archive!
* Add OPENOCD_ADAPTER_SERIAL
* Add handling for cmsis dap
* Fix typo
* Fix weak symbol issue causing Bluetooth to not work. In this case, the weak implementation can simply be removed, because there's no legitimate case where it is used.
Jamie Smith
ccli8
JohnK1987
JojoS
Ladislas de Toldi