The DEVICE_FOO macros are always defined (either 0 or 1).
This patch replaces any instances of a define check on a DEVICE_FOO
macro with value test instead.
Signed-off-by: Alastair D'Silva <alastair@d-silva.org>
Make the option positively named, and as it is a platform config
option make sure it only affects platform code.
HAL functions still remain available even if platform is told not
to use them.
Make the following changes:
-Allow a vector specific ARM MPU driver by defining MBED_MPU_CUSTOM
-Allow ROM address to be configured for ARMv7-M devices by
setting the define MBED_MPU_ROM_END
-Add ROM write protection
-Add new functions and lock
-enable at boot
-disable during flash programming
Enable the MPU as part of the boot sequence and disable it before
starting a new application. Also add reference counted MPU lock and
unlock functions to allow code to execute from ram when necessary.
On platforms using both tickless and the low power ticker wrapper
so much of the background stack is used that it overflows. To
ensure the background thread's stack doesn't overflow increase this
size by 256 bytes when tickless is enabled. Worst case usage
on the NUCLEO_F476RG was recorded at 656 when tickless is
turned on so this increased size should safely prevent overflows.
Only deep sleep when the wakeup time is more than
MBED_CONF_TARGET_DEEP_SLEEP_LATENCY ms in the future.
This ensures that RTOS events are handled at the correct time. Note -
when deep sleep is allow interrupt latency may still be as high as
10ms.
- Hide protected member structures from doxygen.
- Add some more details/comments to the example.
- Add some defined/undefined behaviours.
- Add some additional details to function documentation
Use write() on current output device instead - this works on the
assumption that write() is safe to call from critical section.
UARTSerial has previously been upgraded to support this, and this also
improves the behaviour when buffered serial is in use - the current
buffered output will be fully flushed before outputting the error
message.
Static Thread methods and signal methods have been deprecated. Remove
all references in the main code, and most of the tests. Some tests of
the deprecated APIs themselves remain.
Add a config option for the following values:
MBED_SYS_STATS_ENABLED
MBED_STACK_STATS_ENABLED
MBED_CPU_STATS_ENABLED
MBED_HEAP_STATS_ENABLED
MBED_THREAD_STATS_ENABLED
MBED_CONF_APP_MAIN_STACK_SIZE
MBED_CONF_APP_TIMER_THREAD_STACK_SIZE
MBED_CONF_APP_IDLE_THREAD_STACK_SIZE
MBED_CONF_APP_THREAD_STACK_SIZE
To maintain backwards compatibility inside the RTOS both
APP and RTOS config values can be used.
Add the target config option "boot-stack-size" which is passed to the
linker as the define "MBED_BOOT_STACK_SIZE" so the linker can
adjust the stack accordingly. On mbed 2 the boot stack becomes the
main stack after boot. On mbed 5 the boot stack becomes the
ISR stack after boot. Because of these different uses the stack size
for mbed 2 is set to 4K by default while on mbed 5 it is set to 1k.
Additionally, the NRF5X family requires a larger interrupt stack size
due to the softdevice so the size is increased to 2k on mbed 5 builds.
Perform the following changes:
- change definition of `void Mutex::lock(void)` to `osStatus Mutex::lock(void)`.
- change definition of `void Mutex::unlock()` to `osStatus Mutex::unlock()`.
- use MBED_ERROR1 macro to check the lock/unlock operation status.
- add notes in the description of lock/unlock functions: "This function asserts status of the lock/unlock operation (will not return in case of failure). Use of the return value is deprecated, as the return is expected to become void in the future.".
- modify/add description of the return value.
- remove reference to Mbed 6.
- make `lock(millisec)` deprecated in favour of lock(), trylock() and trylock_for() functions.
Refactor the Mbed 5 boot process to make is simpler and more modular.
This is done by breaking the boot sequence into 4 distinct steps -
Target setup, Toolchain setup, RTOS setup and Mbed setup. This patch
also move toolchain specific code into a per toolchain folder to make
it more maintainable.
Macro MBED_DEPRECATED_SINCE is defined in platform/mbed_toolchain.h which was not included.
If someone used member functions lock (which are prefixed with MBED_DEPRECATED_SINCE since some time), there would be a compile error instead of a warning.
Including mbed_toolchain.h fixes that.
Since `void lock(void)` member function has been added we need to remove default value from deprecated `lock(uint32_t millisec=osWaitForever)` member function since otherwise calling `lock()` would be ambiguous.
Add assertions for statuses returned by osMutexAcquire().
Add void Mutex::lock(void) member function - lock function which does not return status and waits for the mutex forever.
Make osStatus Mutex::lock(uint32_t millisec=osWaitForever) member function deprecated in favour of bool Mutex::trylock_for(uint32_t millisec).
CMSIS repo does not support pre-processor defines, hence multiple assembly
files are added for secure/non-secure and floating point tools.
Mbed OS tools support assembly file pre-processing, but the build system
does not support multiple assembly files for each target, hence updating
the assembly files.
(cherry picked from commit 287121ffdc)
mbed OS used older RTX4 version and with osThreadDef accepting only 3
parameters, to preserve compatibility we hardcode the 'instances'
parameter to 1.
(cherry picked from commit 428acae1b2ac15c3ad523e8d40755a9301220822)
(cherry picked from commit 4360b7bbf8)
Move the function "mbed_get_a9_tick_irqn()" declared in os_tick.h
to SysTimer.h so it does not get overridden when RTX is updated.
This function was originally added in:
3d3e89097d
Fixes for RZ_A1H issue 6543
Schedule the next OS tick inside of the ticker interrupt rather than
in the systick interrupt. Scheduling this while the ticker is
dispatching prevents an unnecissary rescheduling since this
rescheduling is done anyway when dispatching is finished.
This is particularly useful for the low power ticker on devices with
LPTICKER_DELAY_TICKS set to a non-zero value. This is because the low
power ticker cannot be reschduled immediately and needs to fall back
onto the microsecond ticker which temporarily locks deep sleep.
Note - the optimization in this commit is made possible by the commit:
"Don't reschedule ticker while dispatching"
RTX Config header file is internal and not exposed. With latest fixes to use
only public header files from RTX, we need to add these 2 new macros for
RTX ARMC lib configuration.
os_thread_t and family are internal and should not be used (thus we included
internal header file). Instead, use those that are exposed via rtx_os.h file.
Dedicated safe printfs were originally developed to print data over serial with minimal resources. But this adds more code space, so we are switching to use mbed_error_printf.
1. Define RTX_NO_MULTITHREAD_CLIB to provide Mbed-specific multi-thread support for ARM/ARMC6
2. All overridden _mutex_xxx functions are declared with __USED to avoid excluded by linker
NOTE: Microlib doesn't support multi-thread
Add the OsEventObserver mechanism. A client interested in receiving
notifications on certain OS events can register to receive notifications
with osRegisterForOsEvents. This is useful for clients like the secure
memory allocator, which observes thread switching events in order to
swap in and out different memory allocator objects.
OsEventObserver objects expect a context to be maintained per thread on
their behalf. Add this context to the thread control block and extend
the thread creation functions with the ability to supply a context.
uVisor doesn't set the PSP of the target thread. The RTOS sets the PSP
of the target thread from the target thread's TCB. However, when
interrupts of higher priority than PendSV happen between the call to
uVisor to switch boxes, and the RTOS setting PSP, the uVisor vIRQ
interrupt handler will attempt to use an invalid PSP (the PSP from
before the box and thread switch). This leads to a crash. Make box and
thread switching atomic by disabling interrupts immediately before the
box switching until immediately after the new PSP is set.
CMSIS repo does not support pre-processor defines, hence multiple assembly
files are added for secure/non-secure and floating point tools.
Mbed OS tools support assembly file pre-processing, but the build system
does not support multiple assembly files for each target, hence updating
the assembly files.
Antti Kauppila
Alastair D'Silva
Cruz Monrreal
Kevin Bracey
Marc Emmers
Martin Kojtal
Russ Butler
Oren Cohen
deepikabhavnani
Senthil Ramakrishnan
Jeroen de Bruijn
kegilbert
Amanda Butler
Mel W
paul-szczepanek-arm
Steve Cartmell
Filip Jagodzinski
Aashish chaddha
Anna Bridge
Przemyslaw Stekiel
Bartek Szatkowski
Brendan McDonnell
ccli8
Jimmy Brisson
Jan Jongboom
Michael Coulter
Vladimir Umek
Russ Butler
Jaeden Amero