This creates a macro for the UUID length used by Greentea. This cuts
down on the use of "magic numbers" in test cases that use
the GREENTEA_SETUP_UUID function.
This is a workaround for IAR's lack of flexibility with memory regions.
Otherwise these tests would use very little heap and be mostly global
allocations.
This matches the timeout used in linux:
https://linux.die.net/man/5/dhclient.conf
This resolves several issues noticed during testing when we
have a very large number of devices that try to get an IP address
around the same time.
Before, the UDP test was very strict on the number of packets it would
try to match before failing. Now it will keep trying for the whole test
to get enough passing packets. It also includes the test's UUID so you
can validate which packets are being received.
The dtls test already has the ability to retry upon a UDP failure.
However the sockets are currently configured to be blocking and to wait
forever. I added a timeout of 1.5 seconds in order the test to correctly
timeout.
Initialize all values of timeinfo in make_time_info. This prevents
the field 'tm_isdst' from getting inadvertently set to 1 causing
time to be off by 1 hour.
Define CMSIS_VECTAB_VIRTUAL for the M0 targets which have a
corresponding driver. The only M0 target missing this is the LPC4330_M0
which is not part of the 2 or 5 release.
Restore cmsis_nvic (cmsis_nvic.c and cmsis_nvic.h) files for the
implementations which use a mechanism other than the VTOR to set
interrupts. These are vendor specific and were done for M0 devices
which do not have a VTOR.
Note - There were two cmsis_nvic files which did not use the VTOR that
which not restored in this patch. This is because these targets were
not M0 devices and could use the new unified implementation instead.
These files are:
targets\TARGET_ARM_SSG\TARGET_MPS2\TARGET_MPS2_M0P\device\cmsis_nvic.c
targets\TARGET_ONSEMI\TARGET_NCS36510\device\cmsis_nvic.c
Note - cmsis_nvic.c and cmsis_nvic.h were initial removed in
(and restored from) the commit:
b97ffe8fdc -
"CMSIS5: Replace target defined NVIC_Set/GetVector with CMSIS implementation"
Latest cmsis files provide virtual nvic implementation, therefore all nvic
set/get vectors were removed. As the result, we did not reallocate vectors
for mbed SDK. This should fix it for most of the platforms (cortex m0 and
cortex a9 need to provide own if they need it).
Brian Daniels
Christopher Haster
Martin Kojtal
Russ Butler
Jimmy Brisson
Sam Grove
Aksel Skauge Mellbye
Mika Leppänen
Kevin Gilbert
Andrzej Puzdrowski