1. Add startup code and linker script for IAR and
GCC_ARM compilers.
2. Enable IAR and GCC_ARM compilers in targets.json.
Change-Id: I742a89ae73a4e5ede980a8af0821c3f0e5a461ef
Signed-off-by: Mate Toth-Pal <mate.toth-pal@arm.com>
Based on lwip_ethernetif.c skeleton file,
use init, receive and transfer
functionality of SMSC9220 Ethernet driver
for the lightweight IP stack.
Receive mechanism is interrupt driven.
HW buffer sizes:
Tx = 4608 bytes (MTU)
Rx = 10560 bytes
lwIP fine tuning:
mbed-os/features/FEATURE_LWIP/lwip-interface/lwip/src/include/lwip/opt.h
Change-Id: I0ea95650c65fb32cafb5c2d3dde11420c61dba66
Signed-off-by: Gabor Kertesz <gabor.kertesz@arm.com>
- Creates new target in targets.json
- Creates device specific files under ARM_SSG/CM3DS_MPS2 directory
- Driver layer files under CM3DS_MPS2 are based on Beid target
- Device specific files under CM3DS_MPS2/device are based on CMSIS_5 and Beetle
Change-Id: I29ea7a7f42b11cf25b516cce4b9255ab828ca019
Signed-off-by: Tamas Kaman <Tamas.Kaman@arm.com>
Signed-off-by: Marc Moreno <marc.morenoberengue@arm.com>
cmsis 5 does not include it but as mbed 2 requires this, we will bring this file
back. This brings back few other dependencies, that we add only for cortex-a.
Once cortex-a gets cmsis5 and rtx2 support it will be updated.
Remove HAL_Init and related code from SystemInit and move it to
mbed_sdk_init. The function SystemInit is called early in the boot
sequence before RAM is initialized or the VTOR is setup, so it should
not be used to perform the HAL initialization.
This fixes crashes due the vector table being used before it has been
relocated.
The function _eth_arch_low_level_input() is meant to pass data into
LWIP and to prepare the ethernet buffers to receive more data.
If the LWIP heap is empty and the call to pbuf_alloc() in
_eth_arch_low_level_input returns null, the ethernet receive buffers
are not updated to receive data. Because of this the ethernet RX
interrupt will not fire. Since the RX interrupt is the only thing that
triggers a call to _eth_arch_low_level_input(), the receive buffers
will never get cleared, and the device stops receiving data.
To prevent this from happening, this patch ensures that the function
_eth_arch_low_level_input() clears the receive buffers even if a new
pbuf for the data couldn't be allocated.
This issue can be reproduce by running the test
"features-feature_lwip-tests-mbedmicro-net-udp_echo_parallel"
and on the same machine running the below python script to flood the
device with UDP broadcast packets:
MY_IP = #ADD your local IP here
from socket import *
s = socket(AF_INET, SOCK_DGRAM)
s.bind((MY_IP, 1234))
s.setsockopt(SOL_SOCKET, SO_REUSEADDR, 1)
s.setsockopt(SOL_SOCKET, SO_BROADCAST, 1)
for _ in range(1000):
s.sendto("test data", ('255.255.255.255', 1234))
print("Message sent")
This test was removed because of its memory footprint.
Most of the memory consummed by the test itself was related to the instantion of test cases in RAM.
With the introduction of case_t which allows tests cases to live in FLASH, the memory footprint has been drastically reduced (860 bytes of RAM saved) and the ticker test can be reintroduced in the code base.
This creates a macro for the UUID length used by Greentea. This cuts
down on the use of "magic numbers" in test cases that use
the GREENTEA_SETUP_UUID function.
This is a workaround for IAR's lack of flexibility with memory regions.
Otherwise these tests would use very little heap and be mostly global
allocations.
This matches the timeout used in linux:
https://linux.die.net/man/5/dhclient.conf
This resolves several issues noticed during testing when we
have a very large number of devices that try to get an IP address
around the same time.
Before, the UDP test was very strict on the number of packets it would
try to match before failing. Now it will keep trying for the whole test
to get enough passing packets. It also includes the test's UUID so you
can validate which packets are being received.
The dtls test already has the ability to retry upon a UDP failure.
However the sockets are currently configured to be blocking and to wait
forever. I added a timeout of 1.5 seconds in order the test to correctly
timeout.
Initialize all values of timeinfo in make_time_info. This prevents
the field 'tm_isdst' from getting inadvertently set to 1 causing
time to be off by 1 hour.
Jimmy Brisson
mattot01
Tamas Ban
gabker01
Tamas Kaman
Brian Daniels
Mahadevan Mahesh
Martin Kojtal
adbridge
Russ Butler
Yuguo Zou
Vincent Coubard
Christopher Haster
Sam Grove