The flash driver for the LPC55S69 is different from
prior LPC family. Move the Flash HAL driver to SoC
specific folder
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
This data, placed at physically not existing addresses (0x9xxxxxxx) was used
only by PSoC Programmer and KitProg2 and is no longer needed, but was causing
issues with standard hex file processing tools like srecord (srec_cat).
If the board-specific initialization code configures the serial port to
use an 8-bit divider, the serial_init_clock function would configure the
16-bit divider with the same index instead of the intended 8-bit
divider.
Added WiFi_Bt CM4 PSA target in mbedos json
Added SPE-NSPE mailbox initialization for CM4 SystemInit
Made similar to FUTURE_SEQUANA configurations
Copied FUTURE_SEQUANA CM0 SPM part for WiFi_Bt smoke test
Added CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Sorted files for new CY8CKIT_062_WIFI_BT_M0 and CY8CKIT_062_WIFI_BT_M0_PSA targets
Copied files for CY8CKIT_062_WIFI_BT_M0_PSA from FUTURE_SEQUANA
Copied and updated cm0p start files
Corrected according to FUTURE_SEQUANA
Changes to M0 startup files to have SPM started
Fixed implicit declaration warning
Commented interrupts enabling according to FUTURE_SEQUANA flow
Updated prebuild spm_smore CM0 hex for CM4 target
Turned on greentea environment
Used special memory region for common CM0/CM4 data
Updated prebuild CM0 SPM hex
Placed shared memory region for flash operations into SPM shared memory region
Updated cyprotection code and configuration
Start address of protected regions is set by a defined number from target.json
Added masters pcMask configuration
Added support for PSA target to WIFI_BT board
Enabled resources protection for SPM
Aligned RAM usage according to Cypress FlashBoot and CyBootloader
alligned protection config
Added CYW943012P6EVB_01_M0 target
Enlarged heap size, remobed nv_seed
Added heap reservation in linker script from mbed-os
Removed heap size definition
turned on nv_seed config
Removed nv_seed macros
Enabled protection for PSoC6 CM0
Added PSoC6 CM0 PSA readme
Enabled mbed_hal-spm test
Enabled nv_seed and removed unneeded ipc config define
Added SPDX string to feature_ble cypress target files
Removed unneeded supported_toolchains lines for Cypress targets
Disabled protection settings
Corrected flash initialization for PSoC6 CM0 PSA
Changed PSoC6 IPC6 protection for flash
Enabled special flash initialization and enabled protection settings
Updated and added new prebuild PSoC6 CM0 PSA hex files
Disabled HW TRNG and CRC for PSoC6 CM4 PSA target
Added missing const to allow types to match
Updated PSoC6 WIFI_BT_PSA prebuilt directory
Moved PSoC6 shared section usage area definition to begin of ld
Added initial ARM_STD linker and startup files for PSoC6 CM0
Added initial IAR linker and startup files for PSoC6 CM0
Added defines to disable some SPM protection settings for PSoC64
Moved Flash function variables into separate memory region
Added defines for new Public area definition
Updated PSoC6 CM0_PSA hex-files
Page size in all PSOC6 boards is 512 bytes. This is very problematic in
all storage applications. This change reduces the page size (in flash_api's
flash_program_page API) to 32 by reading the original page, modifying it
with programmed data and programming it back. The number 32 for page size
conforms to the number of times (16) this action can be done.
Martin Kojtal
Oren Cohen
Oren Cohen
Michael Schwarcz
Evgeni
Cruz Monrreal
Arto Kinnunen
Alexander Zilberkant
Mahesh Mahadevan
Leszek Rusinowicz
Kyle Kearney
Neil Tuttle
Neil Tuttle
Shuopeng Deng
Vivek Pallantla
Sergii Vozniak
Oleg Kapshii
Sarah Marsh
David Saada
Michael Coulter