- A shared mutex is added for synchronization
- ScopedMutexLock is used to to protect
- SoftAP: start, stop
- STA: scan, join, disconnect
- Fix switching issue between SoftAP and STA mode for primary interface
- Avoid reinit primary interface by getting mapping the current interface to the other one which is already on
- In concurrent mode, STA is the default if it is up, otherwise SoftAP is default.
- For non-concurrent mode, the most recent started interface is set as default.
- Add WhdAccessPoint to include additional WHD scan info
- To save memory, only move assignment is supported for WhdAccessPoint
- Add scan_whd to scan for WhdAccessPoint
- Set set_blocking(false) to unsupported by return NSAPI_ERROR_UNSUPPORTED
Originally, when DEVICE_TRNG is defined, MBEDTLS_ENTROPY_HARDWARE_ALT will also be defined
accordingly to provide entropy source. This is fine for targets supporting TRNG. However, for
targets without TRNG, it is also possible to provide non-TRNG entropy source solution via the
define MBEDTLS_ENTROPY_HARDWARE_ALT. Related discussion can be found at:
https://github.com/ARMmbed/mbed-os/issues/11680
Add 2 targets for DISCO_H747I dualcore:
* DISCO_H747I -> for CM7 core
* DISCO_H747I_CM4 -> for CM4 core
Current restrictions:
* TICKLESS deactivated
* DeepSleep not supported (DeepSleep wrapped to sleep)
Warning: use of the same IP (example I2C1) by both core at the same time is not prevented,
but is strongly not recommended.
Some Hardware Semaphore are use for common IP, to manage concurrent access by both cores: Flash, GPIO, RCC.
Warning: Drag and drop of binary to DISCO_H747I will flash CM7.
In order to flash CM4, one can use STM32 CubeProgrammer tool.
Problem Statement:
During multicast join sequence, InternetSocket::join_multicast_group() calls InternetSocket::modify_multicast_group(). modify_multicast_group() sets up the multicast group address (i.e., mreq.imr_multiaddr) to be joined and the interface address (i.e., mreq.imr_interface) to be used for the multicast join request. The interface address is initialized with the default value, which sets the version of interface address to NSAPI_UNSPEC. This results in LWIP::setsockopt() API to attempt IPv6 multicast join on the IPv4 interface address, hence IPv6 multicast join always fails with the protocol error.
Fix:
Initialize interface address version based on the multicast address version in LWIP::setsockopt(), before attempting multicast join operation.
AT_CellularContext::do_connect() is a virtual API and therefore can be overwritten in
inherited class. The problem was that it sets AT_CellularContext::_is_connected flag but
earlier it was set as private member making it impossible to set in overwritten do_connect()
method.
This commit fixes the problem by changing _is_connected as protected enabling its use
in inherited class.
As of 722628be02, the "remainder" configuration
also uses the default location near the end of flash. Which makes the two tests
nearly identical with the exception that the "last two sectors" test correctly
handles parts with a low (possibly 1:1) erase size to program size ratio.
Therefore, change the "remainder" test to instead be a "default" test that uses
the tdb_internal_address/size values, so that it
a.) tests something meaningfully different and
b.) tests using the custom TDB address/size values if they are provided.
c.) functions correctly on devices where the default sector-based size computation
does not work (e.g. because of the low erase size to program size ratio)
and therefore a custom location and size has been specified.
The is_conf_tdb_internal variable is unused and therefore removed.
Balaji
Martin Kojtal
Lei Zhang
midd
Chun-Chieh Li
Mukund Ghonasgi
Ilia Penev
Mika Leppänen
Alexandre Bourdiol
Sathish Kumar Mani
Michal Paszta
Anna Bridge
Antti Kauppila
Rohan Fletcher
mudassar-ublox
jeromecoutant
Jarkko Paso
Kimmo Vaisanen
Kyle Kearney