* Initial attempt at rethinking the STM32 I2C v2 HAL. Makes single-byte work properly and adds a new 'state' variable to track what the hardware is doing.
* Fix some initial test failures
* Fix incorrect logic
* Fix more incorrect logic
* Tabs to spaces
* Fix repeated starts with single-byte API
* Fix race condition causing stop() after nacked address to sometimes break things
* Fix missed i2c structs that should have been removed
* Fix doing a repeated start from single-byte to transaction API causing I2C peripheral to lock up
* Fix xferOperation being set wrong for repeated starts, causing the peripheral to hang
* Fix race condition with repeated start after single-byte operation
* Fix compilation for targets that use I2C IP v1
* Fix initialization of XferOperation for API v1, optimize stop()
* Remove unneeded line
* Add docs for I2C events
The stdio implementation of the standalone greentea-client wasn't
streaming "KiVi protocol" messages through the serial IO. Separate out
the existing implementation for greentea-client that uses
mbed_retarget.h's `read` and `write` functions so greentea tests
continue to work with the standalone client.
The IO fixture is shared between the "legacy" embedded greentea-client
and the newer standalone client.
Aside from the core mbed-os CMake target, a number of targets have been created so they can optionally be included by application executables that require them using `target_link_libraries()`.
Co-authored-by: Martin Kojtal <martin.kojtal@arm.com>
Co-authored-by: Rajkumar Kanagaraj <rajkumar.kanagaraj@arm.com>
Add license identifier to files which Arm owns the copyright to,
and contain either BSD-3 or Apache-2.0 licenses. This is to address
license errors raised by scancode analysis.
Mbed greentea sends all KV pairs in the following format:
"{{key,value}}\n"
Previously the greentea client code was not reading the final '\n' from
the UART as part of the HandleKV() call. This did not cause an
error when multiple KV pairs were being parsed because any whitespace
proceeding a message was ignored. Once the final KV pair was sent,
however, HandleKV() would only read up to the "}}" leaving the final
'\n' in the UART buffer.
Remove all PSA S-mode only code, as it is unused. Only PSA S targets
would use the code, and we've removed those targets in a previous
commit.
Ensure all tests for S-mode code we are deleting is also removed, even
if that code would run in NS-mode. Keep any tests that also test our PSA
emulation support (for single v7-M targets).
Signed-off-by: Jaeden Amero <jaeden.amero@arm.com>
BLOCK2 code-branch was missing handling for duplicate packets. As part of the fix, added also
a call to update the duplicate package data via a new function
sn_coap_protocol_update_duplicate_package_data_all.
The new implementation handles all CoAP messages, not just those with COAP_MSG_TYPE_ACKNOWLEDGEMENT.
Add also 4.13 (Request Entity Too Large) responses to duplicate info list.
Add client library configurations for DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED.
Increased the default timeouts of DEFAULT_RESPONSE_TIMEOUT and SN_COAP_DUPLICATION_MAX_TIME_MSGS_STORED to 300 seconds.
These two are critical parameters for low-bandwidth high-latency networks. The defaults should be more geared towards such networks that are likely to have issues with transmissions.
The increased defaults can increase the runtime HEAP usage when there is a lot of duplicates or retransmissions.
Jamie Smith
Jamie Smith
Nicole Osazuwa
Robert Walton
Jaeden Amero
George Psimenos
Rajkumar Kanagaraj
Martin Kojtal
Hugues Kamba
Hugues Kamba
pea-pod
jeromecoutant
Harrison Mutai
Lingkai Dong
Arto Kinnunen
Anna Bridge
Qinghao Shi
Dustin Crossman
Esa Jaaskela
Darryl Green
Marcelo Salazar
Teemu Takaluoma
Antti Yli-Tokola