ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
15,187 Commits
52 Branches
336 Tags
628 MiB
Commit Graph

1218 Commits (01fd8804dfa69ea30161d35ddf67efe8e514171f)

Author SHA1 Message Date
Martin Kojtal 8b2eb20a54
Merge pull request #6553 from theotherjimmy/stmL4-armc6 
Correct armc6 detection logic for STM32L4
 2018-04-09 17:36:52 +02:00
Martin Kojtal 96084a3c67
Merge pull request #6561 from LMESTM/Stm32DeepSleepClock 
Stm32 deep sleep clock
 2018-04-09 17:11:23 +02:00
Martin Kojtal a3faf58a9e
Merge pull request #6511 from ashok-rao/MTB_USI_BM22 
Add new target USI WM-BN-BM-22
 2018-04-09 17:07:00 +02:00
Laurent MEUNIER ad4a250292 Style fix 2018-04-06 17:03:53 +02:00
Laurent MEUNIER 3d92af50ce Add delay to let clock stabilize when out of deep sleep 
Tests have shown that there is hich-up on MSI clock during the setup phase.
If this stabilization phase happens when application has restarted again
this can have side effects, like grambled UART characters typically.

So we're adding a delay before hading-over back to application.

With this modification, on NCULEO_L476RG, the wake-up time is increased
from 2ms to 2,5ms.
If possible this should be improved in the future to save 500 microseconds
of wak-up time.  See TODO
 2018-04-06 16:10:27 +02:00
Laurent MEUNIER 8007b1df7c Use temporarily MSI or HSI when exiting Deep Sleep 
There are cases where HW registers are found in unpexcepted state when
exiting Deep Sleep only few micro-seconds after it was entered.

By using an internal clock that does not depend on anythin and clocking
the system without using PLL, this allows SetSysClock default configuration
to run fine whatever possible configuration we find the HW in when
exiting Deep Sleep.

Also we shall restore interrupts only after all cloks are back to
expected running state.
 2018-04-06 16:10:27 +02:00
Jimmy Brisson d374bb4a5a Correct armc6 detection logic 2018-04-05 15:13:52 -05:00
bcostm 8412807669 Update stm32l151xba.h 2018-04-03 15:01:07 +02:00
bcostm 293b3bfdc0 STM32L1: allow redefinition of FLASH_SIZE macro 2018-04-03 14:23:14 +02:00
bcostm 8c0ff8be79 Fix typos causing ARM build error 2018-04-03 14:01:03 +02:00
bcostm d8aa587782 L1 ST CUBE V1.8.1 2018-04-03 14:01:02 +02:00
Ashok Rao 62e5dccd0b Remove irrelevant comments 2018-03-29 16:52:03 +01:00
Ashok Rao 1df5c020b9 Adding USI WM-BN-BM-22 as a new target 2018-03-29 16:20:54 +01:00
Wilfried Chauveau 85af9f96ea add IAR to the supported toolchain 2018-03-28 10:03:23 +01:00
Wilfried Chauveau c31676306a switch to stm32l151cb-a & work around flash size field width. 2018-03-26 18:00:18 +01:00
Wilfried Chauveau 495f8e4e5b add RF_TXCO_EN on PH1 and set HSI calibration to its default value 2018-03-23 10:19:49 +00:00
Wilfried Chauveau 758f3b2dbd add support for the RAK811 2018-03-23 10:19:49 +00:00
Cruz Monrreal 7c272fa3e8
Merge pull request #6412 from jeromecoutant/PR_L4_ADC 
STM32L4 ADC correct internal channel management
 2018-03-22 11:27:50 -05:00
Cruz Monrreal 04a3635eba
Merge pull request #6399 from jeromecoutant/PR_L4_TEMP 
STM32L4 ADC Internal Channel : correct sampling time
 2018-03-22 11:27:30 -05:00
jeromecoutant ef006931f8 STM32L4 ADC correct internal channel management 2018-03-21 10:57:57 +01:00
Cruz Monrreal 6cb6dd9e62
Merge pull request #6330 from bcostm/fix_pins_nucleo_l433rc_p 
NUCLEO_L433RC_P: fix pins definitions
 2018-03-20 14:56:05 -05:00
Cruz Monrreal d7dfab5c7e
Merge pull request #6370 from jeromecoutant/PR_LPT_RTC_OPTIM 
STM32 LPTICKER : optimize RTC wake up timer init
 2018-03-20 14:19:07 -05:00
jeromecoutant 6c369d17aa STM32L4 ADC Internal Channel : correct sampling time 2018-03-20 13:15:17 +01:00
Cruz Monrreal 0adef8a959
Merge pull request #6379 from bcostm/dev_DISCO_L496AG 
DISCO_L496AG: Add new platform
 2018-03-19 11:18:27 -05:00
Cruz Monrreal 05e72dc729
Merge pull request #6353 from jeromecoutant/PR_RTC_LSE 
STM32 RTC init
 2018-03-16 11:45:13 -05:00
bcostm f59f7581fb DISCO_L496AG: add entry in mbed_rtx.h 2018-03-16 10:02:12 +01:00
bcostm 64a824abd2 DISCO_L496AG: add system clock file (same as Nucleo) 2018-03-16 10:02:12 +01:00
bcostm ade8583044 DISCO_L496AG: add other pins related files 2018-03-16 10:02:11 +01:00
bcostm 63901a803c DISCO_L496AG: remove QSPI2 
Base adress not found in registers map file but found in CubeMX xml file.
 2018-03-16 10:02:11 +01:00
bcostm eab3e95158 DISCO_L496AG: add PeripheralPins.c 2018-03-16 10:02:11 +01:00
jeromecoutant 882f3312c3 STM32 LPTICKER : optimize RTC wake up timer init 
Division in a while loop is removed
 2018-03-15 14:23:57 +01:00
jeromecoutant 2f86b3a7bb STM32 RTC init 
When LSE is configured for RTC, LSI is not affected
 2018-03-14 11:12:29 +01:00
bcostm 8fe02803e1 NUCLEO_L433RC_P: fix LEDs pin assignment 2018-03-12 11:30:52 +01:00
Evan Hosseini 94616e6396 mts_mdot_f411re: Fix for Multi-Tech mDot IAR linker script 2018-03-08 16:41:34 -06:00
Cruz Monrreal 8a7b390fdd
Merge pull request #6102 from Ultimaker/master 
Add support for STEVAL-3DP001V1 board
 2018-03-06 20:41:41 -06:00
Rob Meades c53fb9dc64 Call i2c_init() before i2c_frequency() (since i2c_frequency() requires the object to be set up) and zero the I2C object before giving it to i2c_init() as i2_init() has to set up a default frequency for its timeouts to work and it will only do this if the hz field in the object was zero to begin with (otherwise you end up with a random but usually very large indeed timeout). 2018-03-01 14:52:42 +00:00
daid 62599a97f7 Add support for STEVAL-3DP001V1 board, which has an STM32F401VE chip. This support is based on the NUCLEO-F401RE board. Which has the same amount of flash/ram but less pins available on the chip. 2018-02-28 09:37:39 +01:00
Cruz Monrreal 19e07e8d11
Merge pull request #6217 from jeromecoutant/PR_RTC 
STM32 RTC : update free function
 2018-02-27 15:40:11 -06:00
Cruz Monrreal 153fa05bea
Merge pull request #6172 from adustm/l4_linkergcc 
Use SRAM2 32Kbytes on STM32L475 / L476 and L486 devices
 2018-02-27 13:46:26 -06:00
jeromecoutant 961c8da51c STM32F1 RTC : Date read after reset 
F1 is the only STM32 family where RTC date is not saved into registers
 2018-02-27 11:02:49 +01:00
jeromecoutant 45cbdc889f STM32 RTC : update free function 
- LSI specific implementation is removed

- Remove RTC clock disable
 2018-02-27 10:45:43 +01:00
Cruz Monrreal 815c6fb7cf
Merge pull request #6193 from ashok-rao/ODIN_PinsFix 
ODIN MTB LEDs Fix
 2018-02-26 22:49:03 -06:00
Ashok Rao a5899db9e5 ODIN MTB LEDs Fix 2018-02-23 17:10:09 +00:00
adustm d1e6e8f128 Allow jenkins script to pass 2018-02-23 17:40:09 +01:00
adustm 28a43b55e7 Add initial_sp value for STM32L476 and STM32L486 devices 2018-02-23 10:44:14 +01:00
adustm 67953251f9 Use official toolchain defines 2018-02-23 10:29:29 +01:00
adustm 815be94197 Add defined for GCC_ARM to pass heap and stack tests 2018-02-22 17:38:26 +01:00
adustm f551255ded Add support of separate memories for heap and stack region swith the use of TWO_RAM_REGIONS define 2018-02-22 17:37:34 +01:00
adustm 02b2b01a83 Change STM32L475/76/86 GCC_ARM linker files to have HEAP in SRAM1 and stack in SRAM2 (after the interrupt vector) 2018-02-22 17:36:27 +01:00
Fahim Alavi 192250af87 Support added for R410M Changes 
target added r410m

Spaces removed

Trace updated
 2018-02-20 10:32:14 +05:00