ARMmbed
/
mbed-os
mirror of https://github.com/ARMmbed/mbed-os.git
1
0
Fork 0
Code Issues Projects Releases Wiki Activity
30,278 Commits
52 Branches
336 Tags
624 MiB
Commit Graph

110 Commits (tools-release-6.1.0)

Author SHA1 Message Date
Matthew Macovsky 8fd1a502f7 Update SDFP erase detection to properly handle legacy erase instruction 2019-11-12 12:26:25 -08:00
Matthew Macovsky ba412734e1 Move configuration of QSPI format to within commands where it is necessary 2019-11-12 12:26:24 -08:00
Matthew Macovsky 08a0b3daeb Clear block protection on non-SST flash devices 2019-11-12 12:26:24 -08:00
Matthew Macovsky cf9b6d565a Enable 4-byte addressing when supported in accordance with the SFDP standard 2019-11-12 12:26:24 -08:00
Matthew Macovsky 4785e83a31 Update flash device reset to conform to SFDP standard 2019-11-12 12:26:24 -08:00
Matthew Macovsky cd78bf9129 Reorder some functions 2019-11-12 12:26:24 -08:00
Matthew Macovsky e2b1ac0972 Update reading/writing of status registers to conform to SFDP standard 2019-11-12 12:26:24 -08:00
Seppo Takalo ccb77384f1 Remove linefeeds from debug prints 2019-11-04 16:13:33 +02:00
Seppo Takalo 168b51c415 Add storage related files to baseline unittest. 
* Refactor some headers to use relative path from Mbed OS root.
* Refactor some data types to compile on 64bit machines.
* Refactor some debug traces to use mbed_trace.
 2019-11-04 16:12:36 +02:00
Martin Kojtal fe12608226
Merge pull request #11444 from jeromecoutant/PR_QSPI_EXTERNAL 
QSPI : Define default pins at drivers level
 2019-10-21 15:19:08 +02:00
Martin Kojtal 7ba151af99
Merge pull request #11603 from kyle-cypress/pr/qspi-bd-format-error 
Report errors returned by _qspi_configure_format
 2019-10-18 16:05:49 +02:00
Kyle Kearney 52332f9437 QSPIFBlockDevice: Fix incomplete propagation of qspi_inst_t 2019-10-16 15:31:12 -07:00
Martin Kojtal fa6e01a69f QSPIFBlockDevice: fix type on the namespace mbed 2019-10-16 15:31:12 -07:00
Matthew Macovsky b1916fc498 Introduce qspi_inst_t type for QSPI instructions 
Encourage the usage of consistent types (there are currently
 a mix of `int` and `unsigned int` used for qspi instructions)
QSPI commands are limited to 8 bits, to this is a typdef to char
 2019-10-16 15:31:11 -07:00
Martin Kojtal 58fe0ba7b0
Merge pull request #11636 from maciejbocianski/fix_EFM32GG11_STK3701_qspi_block_device_config 
EFM32GG11_STK3701: add QSPIF component config
 2019-10-16 19:12:59 +08:00
jeromecoutant f117d3518d QSPIF frequency setting depends on QSPI memory not target. 
This makes new board with the same QSPI memory addition.
 2019-10-15 17:36:50 +02:00
jeromecoutant 03837a75b7 QSPIF component should use defined QSPI pins 2019-10-15 17:36:49 +02:00
Kyle Kearney 52cb2c2cfc Avoid stale mutex in QSPIFBlockDevice::read 
Update to follow the same `goto exit_point` pattern that is used
by the rest of the functions to avoid leaving the mutex locked
when errors are detected and require the function to abort.
 2019-10-14 13:59:47 -07:00
Kyle Kearney 3f20b80859 Reuse existing error for _qspi_configure_format 
Use QSPIF_BD_ERROR_DEVICE_ERROR instead of introducing a new error code.
Add tr_error calls whenever _qspi_configure_format fails to aid in debugging.
 2019-10-11 14:28:25 -07:00
Kyle Kearney 726a73c048 Report errors returned by _qspi_configure_format 
The function returns a qspi_status_t but most usages in QSPIFBlockDevice
assume that it always succeeds.
 2019-10-11 14:28:13 -07:00
Anna Bridge 489c30f569
Merge pull request #11297 from kyle-cypress/pr/qspi-dummy-cycles 
Differentiate alt and dummy cycles in QSPIF
 2019-10-11 14:34:17 +01:00
Maciej Bocianski f6b9d26f4d EFM32GG11_STK3701: add QSPIF component config 2019-10-04 16:37:12 +02:00
Matthew Macovsky 6bba46e48f Differentiate alt and dummy cycles in QSPIF 
Propagate separate alt cycle and dummy cycle counts from QSPIFBlockDevice
down to the qspi driver, so that drivers which handle the two separately have
enough information to do so.
 2019-09-30 16:17:49 -07:00
Matthew Macovsky baf375f8cb Allow for arbitrary QSPI alt sizes 
The QSPI spec allows alt to be any size that is a multiple of the
number of data lines. For example, Micron's N25Q128A uses only a
single alt cycle for all read modes (1, 2, or 4 bits depending on
how many data lines are in use).
 2019-09-30 14:45:08 -07:00
Kyle Kearney ea7f6683e4 Simplicy QSPIF target overrides for PSoC6 
All current PSoC 6 targets support the same QSPI frequency and minimum
program size. So specify a single entry rather than duplicating for
each device.
 2019-09-25 14:53:54 -07:00
Kyle Kearney 1facc76d22 Specify QSPI frequency for more Cypress targets 
Provide values for CY8CKIT_062S2_43012 and CYW943012P6EVB_01
 2019-08-28 17:56:27 -07:00
Kevin Bracey a522dcfa0a Replace deprecated wait calls 2019-07-15 10:13:50 +03:00
Ryan Morse a8570ffe6c Added support for QSPI to Cypress Boards 2019-05-01 07:09:58 -07:00
Offir Kochalsky 15fdb6ea7e
Update QSPIFBlockDevice.cpp 2019-03-29 17:37:00 +03:00
offirko e8e0fb4fdf If QER is undefined: do nothing but log warning and continue 2019-03-28 10:18:16 +02:00
offirko 1a4c11e3b5 Fixed Bus Mode bit mask to select best mode. 
When setting Quad Enable, either SR1, SR2 or CR setup is required.
Either way register size is up to 2 bytes.
 2019-03-20 15:24:46 +02:00
offirko ce5194f2f8 Fix Bus mode mask and status register write size in 
some modes in quad enable
 2019-03-20 14:27:49 +02:00
Amir Cohen 5c7f6cb755 Merge SPIF & QSPIF components test to general block device tests 
The SPIF and QPIF components tests are fully merged into general block device tests and were deleted
 2019-02-26 10:28:45 -06:00
j3hill 2a72bb67a3 NRF5x: QSPI SFDP read implementation 2019-01-23 10:24:02 -06:00
j3hill e9f08cb4d4 NRF5x: min read/write implementation 2019-01-23 09:55:27 -06:00
Philipp Steiner f0ec813d71 Update Comments 2019-01-17 11:13:16 -06:00
Philipp Steiner 167a3098c8 Add SPIF_ULBPR command also to QSPIFBlockDevice and SPIFReducedBlockDevice 2019-01-17 11:13:16 -06:00
Martin Kojtal a9ce91686c
Merge pull request #9264 from offirko/offir_qspif_reduce_trace_level 
reduce info traces to debug level to prevent logs overflow
 2019-01-08 12:38:51 +00:00
offirko a270cffe39 reduce info traces to debug level to prevent logs overflow 2019-01-06 12:11:30 +02:00
Yossi Levy b17d13e75e Documnent changes and adding const to get_type method 2018-12-23 14:27:14 +02:00
Yossi Levy b8b7292d8e astyle fix 2018-12-23 11:03:45 +02:00
Yossi Levy 1d71fb1c9f Add get_type method to block devices. 2018-12-23 11:03:45 +02:00
Cruz Monrreal 64e7e468b2
Merge pull request #9089 from jeromecoutant/DEV_QSPI_TEST 
STM32 QSPI update
 2018-12-14 10:14:13 -06:00
jeromecoutant fc548cdc05 STM32 QSPIF: add DISCO_L496AG, DISCO_F746NG and DISCO_F769NI 2018-12-13 10:56:36 +01:00
offirko b79c64ec53 Favor QSPI Bus mode 1-4-4 over QPI 
QPI may have slightly better performance, but it is not supported by all targets.
It requires register setup between each Read and Program/Erase commands,
which might damage the overall performance eventually.
 2018-12-12 10:54:48 +02:00
deepikabhavnani da69da972f Add BlockDevice and Filesystem classes inside mbed namespace. 
Adding new modules inside the namespace could be breaking change for existing code base
hence add `using namespace::class` for classes newly added to mbed namespace to maintian
backwards compatibility.

MBED_NO_GLOBAL_USING_DIRECTIVE is added to remove auto-addition of namespace
Macro guard `MBED_NO_GLOBAL_USING_DIRECTIVE` is added around namespace, to avoid
polluting users namespace.
 2018-11-26 13:35:40 -06:00
Martin Kojtal 6d6c09bb80 blockdevice: fix coding style 2018-11-15 07:20:13 +00:00
Martin Kojtal 7d7bfd7bf2 blockdevice: fix components coding style 2018-11-15 07:20:09 +00:00
Offir Kochalsky 2df7258710 Add get_erase_value() support 2018-11-05 12:47:18 +02:00
Marcus Chang 063a7842ba Add QSPIF block device to default system storage 2018-10-26 13:00:38 -07:00
Offir Kochalsky 5cebe43dfc mbed namespace removed add mbed indicator to QSPI 2018-10-21 11:50:17 +03:00
Offir Kochalsky 7d05fcb788 remove mbed namespace from h file and update test 2018-10-21 10:29:03 +03:00
Offir Kochalsky 908233a177 Changes per Pull Request review 3 2018-10-17 14:42:21 +03:00
Offir Kochalsky 23bc67dfdc Fix DISCO_L475VG_IOT01A name at json 2018-10-17 11:16:57 +03:00
Offir Kochalsky 020685c473 Added error logging at set QPI 2018-10-16 10:15:36 +03:00
Offir Kochalsky 9b3bca89fd Enable first fast mode then quad for chips with low power default 2018-10-14 08:54:09 +03:00
Offir Kochalsky a60552c07d Return to 1-1-1 mode prior to setting QUAD enable 2018-10-09 15:17:52 +03:00
Offir Kochalsky 794d150a4a fix unaligned address erase problem 2018-08-28 14:20:07 +03:00
Offir Kochalsky 9d936e10af Added class example documentation 2018-08-27 17:12:21 +03:00
Offir Kochalsky 9920e63d98 Initial QSPIF delivery to mbed-os 2018-08-27 13:02:17 +03:00