Depending on the role and the current state of the local device; pairing cancelation should be made with a call to a specific function. Normally the Nordic stack would reject invalid calls if the device is not in the correct state; therefore it was assumed that it was possible to detect the state from sd errors. Unfortunatelly this is not true with the latest softdevices as some calls succeed even if the device is not in the right state.
To solve that issue cancelation looks at the current state of the device first to select the right function that will trigger the pairing cancellation.
Note: the call to sd_ble_gap_authenticate was missing in the previous algorithm
I added the process for Cortex-A in mbed_application.c because this process was for only Cortex-M.
Also I enabled the macro of MBED_APPLICATION_SUPPORT for Cortex-A.
The mainly changes is below:
- Update scatter file, linker file for bootloader support
- Update the file for RZ/A1 serial flash boot loader
- Add "device name" and "bootloader_supported" in targets.json
The mainly changes is below:
- Add flash_api.c
- Add the definition of SPI multi I/O Bus controller that is used for flash access
- Add "FLASH" as device feature
- Add the macro regarding information of the incorporated Flash
- Add the processing to expand code to RAM
1. Add the IVT header to the binary as this is required for boot up
This was earlier added by the DAPLink firmware. As it is no longer
handled in DAPLink, the header needs to be added inside mbed.
2. Update drivers
Signed-off-by: Mahesh Mahadevan <mahesh.mahadevan@nxp.com>
1. Define RTX_NO_MULTITHREAD_CLIB to provide Mbed-specific multi-thread support for ARM/ARMC6
2. All overridden _mutex_xxx functions are declared with __USED to avoid excluded by linker
NOTE: Microlib doesn't support multi-thread
New changes to Mbed error reporting in 5.9 exposed bug in SPI
driver where an instance was uninitialized twice which triggered
an ASSERT.
This fix keeps track of which instance has been initialized and
only calls uninit when it is safe.
Increase timeout for netsocket TCP and UDP tests. Old timeout
(240 seconds) was not enough for slower devices to complete the
tests.
Accept error codes NSAPI_ERROR_CONNECTION_TIMEOUT and
NSAPI_ERROR_NO_CONNECTION when running test wifi_connect_secure_fail
Set the second highest user level, leaving the highest for UART (we are having constant overflows) and two levels below for everything else.
This should increase the timer accuracy.
RTC counter is 24-bit. Upper layer handles counter size and wraps ticks count when interrupt is to be fired before passing it to common_rtc_set_interrupt(), but for consistency and safety reasons we can wrap it again in the NRF driver.
Vincent Coubard
Senthil Ramakrishnan
Teppo Järvelin
TomoYamanaka
Deepika
Kari Haapalehto
Mahesh Mahadevan
paul-szczepanek-arm
Amanda Butler
aqib nasim
ccli8
Cruz Monrreal II
Melvin van den berg
Marcus Chang
Juha Ylinen
Martin Kojtal
Przemyslaw Stekiel
Qinghao Shi