MTB_ADV_WISE_1530 and MTB_USI_WM_BN_BM_22 includes same usi chip,
so common USI_WM_BN_BM_22 target has been created.
MTB_ADV_WISE_1530 and MTB_USI_WM_BN_BM_22 are inheting the common usi target
Simplify tickers to stop emulating 1us ticks by using native timer resolutions.
Implement ticker get info functions.
Separate rtc and lp ticker init status by implementing separate functions.
Simplify tickers to stop emulating 1us ticks by using native timer resolutions.
Implement ticker get info functions.
Separate rtc and lp ticker init status by implementing separate functions.
Add mbed_critical include file to disable compiler warning messages.
Simplify tickers to stop emulating 1us ticks by using native timer resolutions.
Implement ticker get info functions.
Separate rtc and lp ticker init status by implementing separate functions.
Compile: stm32f7xx_hal_pcd.c
../targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c: In function 'PCD_WriteEmptyTxFifo':
../targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c:1310:11: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (len > ep->maxpacket)
^
../targets/TARGET_STM/TARGET_STM32F7/device/stm32f7xx_hal_pcd.c:1325:13: warning: comparison between signed and unsigned integer expressions [-Wsign-compare]
if (len > ep->maxpacket)
^
Fix hundreds of excessive compiler warnings due to out of enum type range
Examples shown as follows:
mbed-os.lib/targets/TARGET_Realtek/TARGET_AMEBA/sdk/soc/realtek/8195a/fwlib/hal_i2c.h", Line: 329, Col: 34
mbed-os.lib/targets/TARGET_Realtek/TARGET_AMEBA/TARGET_RTL8195A/PinNames.h", Line: 172, Col: 11
Signed-off-by: Tony Wu <tonywu@realtek.com>
Contains one error fix:
IOTCLT-2469 CoAP UDP retransmission does not work for blocks after first one for requests (Eg. registration POST)
NOTE! These are internal changes required for cloud client. This has no direct relevance to any mbed-os functionality.
Bug was reported by @tpet93 and it was correctly diagnosed that channels
were not being set in the phy_params structure. This commit fixes the bug
and sets up channels correctly.
This patchs adds TRNG support using the upstreamed, open-source, TZ-TRNG
driver.
It also implements the HAL for TRNG and add it in features.
The mbed-os.py script deletes files that are unused by mbed-os.
Change-Id: Idf8eefd809f00d40e0ad3cf7657f2a8c2eca3505
Signed-off-by: Hugues de Valon <hugues.devalon@arm.com>
Tests have shown that there is hich-up on MSI clock during the setup phase.
If this stabilization phase happens when application has restarted again
this can have side effects, like grambled UART characters typically.
So we're adding a delay before hading-over back to application.
With this modification, on NCULEO_L476RG, the wake-up time is increased
from 2ms to 2,5ms.
If possible this should be improved in the future to save 500 microseconds
of wak-up time. See TODO
There are cases where HW registers are found in unpexcepted state when
exiting Deep Sleep only few micro-seconds after it was entered.
By using an internal clock that does not depend on anythin and clocking
the system without using PLL, this allows SetSysClock default configuration
to run fine whatever possible configuration we find the HW in when
exiting Deep Sleep.
Also we shall restore interrupts only after all cloks are back to
expected running state.
jeromecoutant
Paul Thompson
Kari Haapalehto
Keyur Hariya
Teppo Järvelin
Tony Wu
Kimmo Vaisanen
Antti Yli-Tokola
Hasnain Virk
Martin Kojtal
Hugues de Valon
bcostm
Christopher Haster
Jimmy Brisson
Wilfried Chauveau
Netanel Gonen
Netanel Gonen
Teemu Kultala
Krzysztof Stachowiak
Thomas Sailer
Thomas Sailer
Laurent MEUNIER
Ashok Rao