Add NOPs after deep sleep to prevent unexpected behavior. It appears
that the first one or two instructions after deep sleep do not get
executed properly.
Note - This is a temporary workaround. For a more robust solution
the NCS36510 needs to investigate the root cause of this issue.
The lp_ticker test overrides the default ticker handler for the
low power ticker. This stops all other low power TimerEvents in the
system, including the ones for tickless, from getting called. Because
of this devices with tickless enabled malfunction during this test.
This patch fixes this problem by passing all lp ticker events it did
not trigger on to the TimerEvent irq handler.
Cellular example had build issues with IAR8, combination of define and string
as argument to send function resulted in above error. Typecasting to const char *
didn't help, hence replacing the define explicitly.
The NCS36510 is not suitable for tickless, since its LP ticker cannot
be scheduled fast enough. This is because it takes four 32KHz clock
cycles before these writes take effect - ~120us.
Increase the Timeout period from 1ms to 10ms so interrupt latency has
1/10th the effect on the measurement. This prevents failures due to
interrupt latency causing a drift.
Decrease the interrupt stack from 2k down to 1k so there is enough
ram to build all the tests with tickless enabled. In general, targets
should not need an interrupt stack greater than 1k with mbed-os.
Some Cortex-M0 devices, such as the nrf51, don't have the SysTick.
Instead, these targets use a software interrupt to simulate SysTick.
Add the hooks in the tickless code to support these devices. Targets
which do not have SysTick should now define NO_SYSTICK in targets.json
and implement mbed_get_m0_tick_irqn to add os suport.
This patch also removes os tick handling from the existing devices
(nrf51) since this is now handled in common code.
Add support for tickless by replacing RTX's SysTick timer code with
with code which uses an mbed timer along with suspending and
resuming the kernel in the idle loop. Tickless is enabled on a
per-target basis by defining the macro MBED_TICKLESS.
attach/detach can be multiple invoked. Therefore lock/unlock deep sleep
only for the very first time it is invoked (when callbacks
are actually changed).
Any driver with attach or async API should be considered for deep sleep.
Add locking to those that require in most cases
high-frequency clocks:
- CAN
- I2C
- SPI
- Serial
- Ticker/Timeout/Timer
Sleep manager provides API to lock/unlock deepsleep. This API allows a user to
control deep sleep.
This API should be done via atomic operations (to be IRQ/thread safe).
Deepika
Anna Bridge
David Walters
mbedNoobNinja
Russ Butler
Russ Butler
Martin Kojtal
Jimmy Brisson
0x6d61726b
Yuguo Zou